BigBirdLS1

So my friend will have very soon a skyline motor in his 240 it will be stock turbo on 10 psi. He said it should have 320rwhp He wants to run car in sig. My car is a M6 car and his is a M5 runs will be from a roll at 30ish mph. What will happen

Juicy J

iTrader: (5)

I think this race is yours. An RB20 really isn't that impressive in my opinion. If someone was to do the RB swap, I don't know why they wouldn't swap a 6 banger. You have to wind the **** out of that motor to make any power if I remember correctly.

the jester 812

iTrader: (5)

RB20 is a 6 banger, inline 6. all the RB's are 6's. rb20-rb25-rb26-rb30
i had a 95 240sx that i was seriously contemplating doing a rb25 swap into.

Lickeyman

iTrader: (1)

You'd get him if he is really only running 10lbs. 10bls on rb20 and stock stuff is about 100hp less than your friend is thinking.

Friend had exact same swap and it was slow at stock boost.

x2 Rb motors are sixes.

http://www.youtube.com/watch?v=KDdkz4JalG0

Juicy J

iTrader: (5)

I stand corrected. I thought the 20's were 4 bangers. Thats one tiny little 6.

AznMuscle

iTrader: (7)

I honestly wouldn't waste my time on a rb20....if I were to drop the coin, and suffer the headaches of a rb swap, it would be a 25, or a 26 if I could find one for a decent price. I would rather stick with a sr...parts are cheap, and everywhere, and they can be fast.

x3 on rb20 being a 6...

OP. You win via rape.

Lickeyman

iTrader: (1)

You should see one with the head off.

the jester 812

iTrader: (5)

the rb25 is not too terrible expensive, but the 26's are way out there price wise