Dyno Guesses & Bench Racing Forum Horsepower Estimates | Racing Scenarios

Boosted 2v Gt (LS1kilr) calls out cam/spray LS1's

Thread Tools
 
Search this Thread
 
Old 04-14-2010, 11:12 AM
  #1  
10 Second Club
Thread Starter
 
273sunsetZ's Avatar
 
Join Date: Aug 2005
Location: Tennessee Tech
Posts: 567
Likes: 0
Received 0 Likes on 0 Posts

Default Boosted 2v Gt (LS1kilr) calls out cam/spray LS1's

Posting this up before this saturday to get an idea of what you guys think will happen. It is definitly going down, finally....

Long story short, LS1kilr called out all cam/spray LS1's in the area a while back. Since I'm the only one running a decent cam and spray combination around nashville that performs I'm stepping up to the plate to make him work for the LS1kilr badge.

His platform consists of a completly forged bottom end, with a pretty small turbo think it's a 62mm, made 530/630ftlbs.

I'll be pulling 2 more degrees of timing and putting the 200 jets in, I trap 130 with the 150 jets so from a 40 kick and the big hit I'm hoping to pull him.
Old 04-14-2010, 11:14 AM
  #2  
10 Second Club
Thread Starter
 
273sunsetZ's Avatar
 
Join Date: Aug 2005
Location: Tennessee Tech
Posts: 567
Likes: 0
Received 0 Likes on 0 Posts

Default

Just read the rules sticky, guess i should have posted in bench racing oh well haha...
Old 04-14-2010, 11:22 AM
  #3  
TECH Resident
iTrader: (7)
 
sujomatt's Avatar
 
Join Date: Dec 2008
Location: CT
Posts: 796
Likes: 0
Received 0 Likes on 0 Posts
Default

... you > ls1hater.
Old 04-14-2010, 11:34 AM
  #4  
TECH Addict
iTrader: (39)
 
jrob56's Avatar
 
Join Date: Jul 2006
Location: Indianapolis, IN
Posts: 2,153
Received 0 Likes on 0 Posts

Default

whoop that ***, and get it on video!
Old 04-14-2010, 11:36 AM
  #5  
TECH Fanatic
iTrader: (6)
 
marc97taws6's Avatar
 
Join Date: Sep 2008
Location: DSM
Posts: 1,433
Likes: 0
Received 0 Likes on 0 Posts
Default

Get a good run on video. Sounds like he has a very formidable setup though
Old 04-14-2010, 11:38 AM
  #6  
On The Tree
iTrader: (1)
 
Longshot LCMS's Avatar
 
Join Date: Jan 2010
Location: Parris Island, SC
Posts: 178
Likes: 0
Received 1 Like on 1 Post
Default

With the 200 jets in I think you'll get it done. 2Vs can be very nasty when built correctly though. Another thing to watch for... what weight is he at? 2V GTs can get very very light with the right weight reduction. No AC and drag wheels and some lightweight suspension pieces can get them in the 3000-3100lb range pretty comfortably.
Old 04-14-2010, 11:51 AM
  #7  
TECH Enthusiast
iTrader: (4)
 
Tricked-Out-Toy's Avatar
 
Join Date: Dec 2005
Location: Nashville, TN
Posts: 612
Likes: 0
Received 0 Likes on 0 Posts

Default

BUST HIS ***! Im sick of that douche. I bet he doesnt show tho... ppl have been trying to race him for years and I hear nothing but excuses..
Old 04-14-2010, 11:54 AM
  #8  
Tech Apprentice
iTrader: (1)
 
Stopsign32v's Avatar
 
Join Date: Dec 2006
Posts: 191
Received 0 Likes on 0 Posts

Default

He wont show. No way no how.
Old 04-14-2010, 12:12 PM
  #9  
Moderator
iTrader: (15)
 
JayplaySS's Avatar
 
Join Date: Dec 2004
Location: Miami, OH
Posts: 4,616
Received 161 Likes on 99 Posts

Default

Originally Posted by 273sunsetZ
Just read the rules sticky, guess i should have posted in bench racing oh well haha...

Atleast you read them, I'll move it since you tried.
Old 04-14-2010, 04:49 PM
  #10  
10 Second Club
Thread Starter
 
273sunsetZ's Avatar
 
Join Date: Aug 2005
Location: Tennessee Tech
Posts: 567
Likes: 0
Received 0 Likes on 0 Posts

Default

Originally Posted by Tricked-Out-Toy
BUST HIS ***! Im sick of that douche. I bet he doesnt show tho... ppl have been trying to race him for years and I hear nothing but excuses..

Oh he's gonna show, a whipple cobra called him out last week and he's gonna be there sat. can't wait to put it on him....
Old 04-14-2010, 04:56 PM
  #11  
10 Second Club
Thread Starter
 
273sunsetZ's Avatar
 
Join Date: Aug 2005
Location: Tennessee Tech
Posts: 567
Likes: 0
Received 0 Likes on 0 Posts

Default

Originally Posted by Longshot LCMS
With the 200 jets in I think you'll get it done. 2Vs can be very nasty when built correctly though. Another thing to watch for... what weight is he at? 2V GTs can get very very light with the right weight reduction. No AC and drag wheels and some lightweight suspension pieces can get them in the 3000-3100lb range pretty comfortably.
From what i know he's still full weight, could be wrong though. I know its fast, but 1 he can't drive, and 2 he can't drive..haha I'm gonna try and slow it down to a 35, it will be on vid though.
Old 04-14-2010, 05:34 PM
  #12  
TECH Senior Member
iTrader: (4)
 
ULTIMATEORANGESS's Avatar
 
Join Date: Mar 2003
Location: eatontown,nj
Posts: 10,976
Likes: 0
Received 17 Likes on 15 Posts

Default

didnt this guy challenge lemons12 on svtp and never showed up?
Old 04-14-2010, 11:15 PM
  #13  
10 Second Club
Thread Starter
 
273sunsetZ's Avatar
 
Join Date: Aug 2005
Location: Tennessee Tech
Posts: 567
Likes: 0
Received 0 Likes on 0 Posts

Default

Originally Posted by ULTIMATEORANGESS
didnt this guy challenge lemons12 on svtp and never showed up?
Yup, same guy. He claims he showed up and lemons didn't but who knows.... The guy only wants to race from a roll and lemons wants to go from a dig, i don't like roll racing but i'll make an exception for the so called ls1kilr.
Old 04-14-2010, 11:17 PM
  #14  
On The Tree
 
Heater's Avatar
 
Join Date: Aug 2009
Location: Wilmywood NC
Posts: 149
Likes: 0
Received 0 Likes on 0 Posts
Default

LoL, I remember that thread.
Old 04-14-2010, 11:21 PM
  #15  
10 Second Club
Thread Starter
 
273sunsetZ's Avatar
 
Join Date: Aug 2005
Location: Tennessee Tech
Posts: 567
Likes: 0
Received 0 Likes on 0 Posts

Default

FWIW, this is the last time I had the big pills in.

http://www.youtube.com/watch?v=pMFuR...layer_embedded





This was on my old tune, with 19* total timing and race fuel. We got 30rwhp out of it a few weeks ago n/a so ready to see how it performs on the big hit.
Old 04-15-2010, 12:52 AM
  #16  
TECH Enthusiast
iTrader: (3)
 
The Manalishi's Avatar
 
Join Date: Jan 2008
Posts: 741
Likes: 0
Received 10 Likes on 5 Posts

Default

He won't show. Hell if the finest woman in the world offered him ***** he wouldn't show and his excuse would be his dick was broke.
Old 04-15-2010, 03:29 AM
  #17  
11 Second Club
iTrader: (7)
 
AznMuscle's Avatar
 
Join Date: Jan 2007
Location: Someplace Hot
Posts: 817
Likes: 0
Received 1 Like on 1 Post
Default

Originally Posted by The Manalishi
He won't show. Hell if the finest woman in the world offered him ***** he wouldn't show and his excuse would be his dick was broke.
Dammit, I just changed my sig, and you had to go and post something like this. Thank you Sir
Old 04-15-2010, 09:59 AM
  #18  
TECH Apprentice
iTrader: (2)
 
blk99sleekbeak's Avatar
 
Join Date: Jul 2008
Location: middle tn
Posts: 340
Received 1 Like on 1 Post

Default

Hahaha i found it. yea justin hes full weight. He is good at making excuses. Wouldnt suprise me a bit if he didnt show. I cant wait to get all my parts in so i can get my car finished up and bust his *** from a low roll also. The guy absolutely refuses to do digs. He spent all his money on the turbo kit/ shortblock and is on stock suspension and regular street tires. Im excited about this. I think its funny how he calls evans(lemons12) car a joke when it ran a 7.30 2 weeks ago ON MOTOR. And 370whp at that.
Old 04-15-2010, 10:20 AM
  #19  
Teching In
 
jdcws6's Avatar
 
Join Date: May 2009
Location: clarksville tn
Posts: 41
Likes: 0
Received 0 Likes on 0 Posts

Default

good stuff, yeah we know u will definatly pull him. i heard hes makin 570whp now but its not gonna matter. hell in the video look what u did to a 600hp m3
Old 04-15-2010, 11:09 AM
  #20  
TECH Fanatic
iTrader: (12)
 
Snake_Skinner's Avatar
 
Join Date: Mar 2009
Location: In front of a mustang
Posts: 1,124
Received 2 Likes on 2 Posts

Default

Plz... get him there, race him, and make him hurt. make him say damnit i knew i should of gotten an LS1.


Quick Reply: Boosted 2v Gt (LS1kilr) calls out cam/spray LS1's



All times are GMT -5. The time now is 08:21 PM.