what RWHP numbers did you pull with your LS1 383 stroker?
#64
Launching!
Thread Starter
Join Date: Dec 2008
Location: SAN DIEGO
Posts: 209
Likes: 0
Received 0 Likes
on
0 Posts
well everyone i think i found the problem to my motor not making a good amount of power or atleast what it should. The people who had done the port job on my stock heads pretty much bs'd me the ports look completely stock the chamber looks like they tried to port them and left them all shitty so im having them ported out ligit by a good shop and i cant wait to see if motor combo produces what its suppose too oh and besides the port job new seals and guides!! Thanks for all the help gents
#67
On The Tree
iTrader: (7)
Join Date: Nov 2009
Location: Tigard, Oregon
Posts: 171
Likes: 0
Received 0 Likes
on
0 Posts
That's definitely caused by oil, and the oil is causing detonation, these 383's like to consume oil if you don't have all the details correct, aka piston to wall clearance just to name one, having said that I'd bet a lot of cash that your guides are worn so bad the seals can't do there job, some is pcv oil but that's a ton of oil lol, for a cam I'd go 227-235. 600 lift114lsa for good street manners and good power, that motor should easily make 450-475 rwhp setup with the right heads and cam imo
#68
Launching!
Thread Starter
Join Date: Dec 2008
Location: SAN DIEGO
Posts: 209
Likes: 0
Received 0 Likes
on
0 Posts
yup
That's definitely caused by oil, and the oil is causing detonation, these 383's like to consume oil if you don't have all the details correct, aka piston to wall clearance just to name one, having said that I'd bet a lot of cash that your guides are worn so bad the seals can't do there job, some is pcv oil but that's a ton of oil lol, for a cam I'd go 227-235. 600 lift114lsa for good street manners and good power, that motor should easily make 450-475 rwhp setup with the right heads and cam imo