SBE 6.0 with ALL THE BOOST!!
#1
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Lets give this one a shot..
I have a gen4 LQ4 with the following:
-honed and cleaned block
-all new rings and bearings
-317 heads
-LS7 lifters, new comp pushrods
-LS9 Head gaskets
-BTR Springs
-LJMS stage 3 cam
-LS1 intake
-Electric water pump
-120 lb injectors
-magnafuel pump
-C-16 for fuel
-Work Turbo Billet S483
-A2W Intercooler
-UCC 10.5 Billet convertor
-Powerglide
What y'all think this turd will make??
I have a gen4 LQ4 with the following:
-honed and cleaned block
-all new rings and bearings
-317 heads
-LS7 lifters, new comp pushrods
-LS9 Head gaskets
-BTR Springs
-LJMS stage 3 cam
-LS1 intake
-Electric water pump
-120 lb injectors
-magnafuel pump
-C-16 for fuel
-Work Turbo Billet S483
-A2W Intercooler
-UCC 10.5 Billet convertor
-Powerglide
What y'all think this turd will make??
#5
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Lets give this one a shot..
I have a gen4 LQ4 with the following:
-honed and cleaned block
-all new rings and bearings
-317 heads
-LS7 lifters, new comp pushrods
-LS9 Head gaskets
-BTR Springs
-LJMS stage 3 cam
-LS1 intake
-Electric water pump
-120 lb injectors
-magnafuel pump
-C-16 for fuel
-Work Turbo Billet S483
-A2W Intercooler
-UCC 10.5 Billet convertor
-Powerglide
What y'all think this turd will make??
I have a gen4 LQ4 with the following:
-honed and cleaned block
-all new rings and bearings
-317 heads
-LS7 lifters, new comp pushrods
-LS9 Head gaskets
-BTR Springs
-LJMS stage 3 cam
-LS1 intake
-Electric water pump
-120 lb injectors
-magnafuel pump
-C-16 for fuel
-Work Turbo Billet S483
-A2W Intercooler
-UCC 10.5 Billet convertor
-Powerglide
What y'all think this turd will make??
![Icon Confused](https://ls1tech.com/forums/images/smilies2/icon_confused.gif)
I'm just messing. How much boost are you looking to run? What platform and what controler?
#6
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
LS1FTW!! lol As far as boost I'm thinking mid/high 20's. Its going in a 89 Mustang. Its was a nitrous car that ran 5.40. it should weight around 2,700lbs I have a MS3Pro for a controler.
#7
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Edit: If it survives.