1998 Trans Am Partout

Thread Tools
 
Search this Thread
 
Old Sep 10, 2012 | 10:15 AM
  #1  
Busey131's Avatar
Thread Starter
Teching In
iTrader: (11)
 
Joined: May 2011
Posts: 33
Likes: 0
From: Red Lion, PA
Default 1998 Trans Am Partout

Never thought I would have to do this, but I'm parting out my car.
There is front and rear damage on the passenger side, got caught in a sudden downpour on I83 and hydroplaned into a wall.

Interior is all original grey leather, dash is not cracked, t tops are good.
Seats are a little worn but still in good shape, only one slight tear on each where the stitching started to come apart.

List of aftermarket goodies.
- Fresh LS1 w/853 heads. I bought this motor from Daves performance in ohio, came out of a 03 vette with 47k on it. I replaced the main and rod bearings, and replaced the bolts with arp hardware. Head gaskets were replaced with 3 layer felpro steel gaskets.
Has trickflow 228/230 cam, with comp valve springs, and comp 7.400 pushrods.
Car put down 414/387.
SOLD

- t56 trans
Around 100k miles, shifts smooth as butter.
SOLD

-862 heads
I started to port these for a build and went a different direction, I have all the stock valves springs and retainers.
$100

-Centerforce dfx, less then 2k on this, just over a month old. Grabs great.
$350

-BMR torque arm
non adjustable trans mount, less then 2k miles.
$150

-Spohn adjustable control arms
1 way adjustable tubular cromoly w/ roto joint.
(Sold)

-Spohn adjustable pan hard
One way adjustable tubular cromoly.
(Sold)

-Fresh 10 bolt with 3.42's
All bearings replaced 5k ago, fluid changed 3 months ago, absolutely no noise.
$200

-Flowmaster Catback w/hooker cutout
$125

-Grotyohann LT's 1 3/4"
EGR pipes welded, with custom y pipe, good all around.
$175

-Ls6 intake
Painted gloss black
(Sold)

-28lb stock injectors
$100

-PP 80mm throttle body
$130

-MSD wires
$35

-B&M ripper short throw
Only 2 months old, I personally like this better then my old 5.0
$140

-Zr1 wheels
17 x 9 1/2" polished, ORIGINAL zr1's off of a 97 Vette.
Rears have 275/40 nt555r, fronts supra 275/40. One wheel has slight rash around bead from accident, barely noticeable.
$550

-Stock Trans Am hood
Great shape, silver in color, does have some chip marks on the nose nothing to major.
$150

-Rear Hatch
SOLD

-Rear spoiler
Sanded and ready for paint!
$100

-Front and rear seats
Charcoal leather, Fronts are in good shape, show some wear with a minor tear on both. Rears are in great shape
$200 for the set, or I will split them up if needed.

-T tops
I have 2 sets, both are in awesome shape, and charcoal grey.
$50 each set

Anything else make a offer, I would like to keep most of the larger items pickup only but I will ship at buyers expense if need be.
Thanks.

Last edited by Busey131; Nov 20, 2012 at 09:07 PM. Reason: Updating
Reply
Old Sep 10, 2012 | 12:12 PM
  #2  
Zero4488's Avatar
Restricted User
iTrader: (10)
 
Joined: Feb 2007
Posts: 1,455
Likes: 0
From: Jersey
Default

I'm extreme interested in the trans an rear...PM me a package deal...
Reply
Old Sep 10, 2012 | 03:04 PM
  #3  
dropedss86's Avatar
12 Second Club
iTrader: (5)
 
Joined: Mar 2010
Posts: 68
Likes: 0
Default

Intrested in the Seats and Visors did the Tailights survive also
Reply
Old Sep 11, 2012 | 09:26 PM
  #4  
02BLKWS6MD's Avatar
TECH Enthusiast
iTrader: (22)
 
Joined: Jun 2006
Posts: 746
Likes: 0
From: Millersville, MD
Default

interested in the ls6 manifold
Reply
Old Sep 13, 2012 | 06:56 PM
  #5  
Busey131's Avatar
Thread Starter
Teching In
iTrader: (11)
 
Joined: May 2011
Posts: 33
Likes: 0
From: Red Lion, PA
Default

Originally Posted by Zero4488
I'm extreme interested in the trans an rear...PM me a package deal...
PM sent

Originally Posted by dropedss86
Intrested in the Seats and Visors did the Tailights survive also
Tailights are toast, sent you a pm

Originally Posted by 02BLKWS6MD
interested in the ls6 manifold
sent pm
Reply
Old Sep 13, 2012 | 07:08 PM
  #6  
GoodSpeed150's Avatar
Launching!
15 Year Member
Photogenic
iTrader: (7)
 
Joined: Sep 2009
Posts: 200
Likes: 0
From: Severn, MD
Default

Thanks again for your help.

Last edited by GoodSpeed150; Sep 20, 2012 at 08:56 AM.
Reply
Old Sep 13, 2012 | 07:16 PM
  #7  
CJDZ24_Z28's Avatar
TECH Addict
iTrader: (75)
 
Joined: Aug 2005
Posts: 2,167
Likes: 1
From: South Jersey (15 miles from Atlantic City)
Default

I'll take the LT and Y
Reply
Old Sep 13, 2012 | 07:22 PM
  #8  
CJDZ24_Z28's Avatar
TECH Addict
iTrader: (75)
 
Joined: Aug 2005
Posts: 2,167
Likes: 1
From: South Jersey (15 miles from Atlantic City)
Default

I'm not that far and i will come get the G-hans and PP TB thanks
Reply
Old Sep 13, 2012 | 08:51 PM
  #9  
SSdreamz's Avatar
TECH Enthusiast
iTrader: (3)
 
Joined: May 2005
Posts: 590
Likes: 0
From: York, PA
Default

what are you looking to get into now Gary?
Reply
Old Sep 19, 2012 | 08:08 PM
  #10  
CJDZ24_Z28's Avatar
TECH Addict
iTrader: (75)
 
Joined: Aug 2005
Posts: 2,167
Likes: 1
From: South Jersey (15 miles from Atlantic City)
Default

any info or updates?
Reply
Old Sep 26, 2012 | 11:15 PM
  #11  
whitew01ws6's Avatar
12 Second Club
iTrader: (12)
 
Joined: Feb 2008
Posts: 407
Likes: 0
From: westminster MD
Default

Steering wheel front markers and ds headlight motor pm me please and thank you
Reply
Old Sep 27, 2012 | 12:13 AM
  #12  
My84Z's Avatar
TECH Junkie
20 Year Member
Photogenic
Photoriffic
iTrader: (18)
 
Joined: Sep 2003
Posts: 3,035
Likes: 2
From: Dartmouth, Mass
Default

3 or 4 channel rear?
Reply
Old Sep 27, 2012 | 07:11 AM
  #13  
outkast6991's Avatar
TECH Fanatic
iTrader: (34)
 
Joined: Jun 2004
Posts: 1,625
Likes: 0
From: lancaster,pa
Default

pm me a price for the rear. i'm local and will pick up with cash
Reply
Old Oct 3, 2012 | 10:21 AM
  #14  
Busey131's Avatar
Thread Starter
Teching In
iTrader: (11)
 
Joined: May 2011
Posts: 33
Likes: 0
From: Red Lion, PA
Default

Originally Posted by CJDZ24_Z28
I'm not that far and i will come get the G-hans and PP TB thanks
Ghans and Y are pending. Throttle body is still available.

Originally Posted by SSdreamz
what are you looking to get into now Gary?
I actually went to the dark side, and picked up a supra.
Originally Posted by CJDZ24_Z28
any info or updates?
Car is now at my residence and tear down has begun, everything should be officially up for grabs by next wednesday.
Originally Posted by whitew01ws6
Steering wheel front markers and ds headlight motor pm me please and thank you
Sent

Originally Posted by My84Z
3 or 4 channel rear?
4 channel

Originally Posted by outkast6991
pm me a price for the rear. i'm local and will pick up with cash
Hey guy, sent you a PM.
Reply
Old Oct 3, 2012 | 10:48 AM
  #15  
02BLKWS6MD's Avatar
TECH Enthusiast
iTrader: (22)
 
Joined: Jun 2006
Posts: 746
Likes: 0
From: Millersville, MD
Default

Let me know when the intake manifolds off. What year supra? I believe my buddy has a 72 mm turbo setup off his 95
Reply
Old Oct 4, 2012 | 01:10 PM
  #16  
Busey131's Avatar
Thread Starter
Teching In
iTrader: (11)
 
Joined: May 2011
Posts: 33
Likes: 0
From: Red Lion, PA
Default

Its a mk3 with a heart transplant, if he's getting rid of the 72mm setup let me know!
I'm only running a gt35 (61mm) at the moment.
Reply
Old Nov 12, 2012 | 08:43 AM
  #17  
transampetews6's Avatar
9 Second Club
15 Year Member
Photogenic
Photoriffic
iTrader: (31)
 
Joined: Oct 2008
Posts: 187
Likes: 0
From: Lanoka Harbor, NJ
Default

do you have the ram-air hood still?
Reply
Old Nov 12, 2012 | 09:40 AM
  #18  
C5kid's Avatar
TECH Regular
iTrader: (12)
 
Joined: Mar 2003
Posts: 453
Likes: 0
From: Hershey, PA
Default

Do you have the radiator fan? I'd be interested in that.
Reply
Old Nov 13, 2012 | 08:36 PM
  #19  
Busey131's Avatar
Thread Starter
Teching In
iTrader: (11)
 
Joined: May 2011
Posts: 33
Likes: 0
From: Red Lion, PA
Default

Everything is still available minus the rear, tq arm, and panhard! Car is coming apart this week for good, anything not sold by new years is getting scrapped.
Reply
Old Nov 16, 2012 | 06:34 AM
  #20  
transampetews6's Avatar
9 Second Club
15 Year Member
Photogenic
Photoriffic
iTrader: (31)
 
Joined: Oct 2008
Posts: 187
Likes: 0
From: Lanoka Harbor, NJ
Default

do you have a ram-air hood????
Reply



All times are GMT -5. The time now is 11:31 AM.