Almost ready for some racing
Almost ready for some racing Well I got the car out again today and did 2 heat cycles to the new rear and washed it.
10 point is in a painted and 95% of the interior is back in the car. I got my new Midwest fab 9 installed. Narrowed 2 inches per side back braced, aluminum center section, 3.70 gears, spool, Strange drag brakes and Greg Weld wheels on all 4 corners.
All I have left to do is finish wiring the Controller for my new Alky Control Meth kit and button up the interior and due 2 more heat cycles to the rear.
Jeremy Formato is tuning the car for the Meth on Friday and if the weather holds out Saturday I am gonna head down to Cecil for some racing. Thankfully I just picked up my own trailer last week so I am ready to do some racing
Here are a few pics
10 point is in a painted and 95% of the interior is back in the car. I got my new Midwest fab 9 installed. Narrowed 2 inches per side back braced, aluminum center section, 3.70 gears, spool, Strange drag brakes and Greg Weld wheels on all 4 corners.
All I have left to do is finish wiring the Controller for my new Alky Control Meth kit and button up the interior and due 2 more heat cycles to the rear.
Jeremy Formato is tuning the car for the Meth on Friday and if the weather holds out Saturday I am gonna head down to Cecil for some racing. Thankfully I just picked up my own trailer last week so I am ready to do some racing
Here are a few pics
I hate you and your deep dishes.......j/k....where's some pics of that pretty Midwest man, I'm looking at the weather as well considering I want to go down too, so we'll see what happens.
I want to see that car run 9's.
I want to see that car run 9's.
Trending Topics
Yeah I know but you can't really see it at all because of the exhaust. I am hoping the weather is nice. The car will be getting trailered to get tuned so I might just leave it on the trailer over night and go racing in the morning. I am hoping for 9's too but I would be happy with a 10.2 first time out this year with the new set up
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
Thanks Man your car is a work art too. I will be down and OCMD cruise weekend. I am staying at the crystal sands same place Bruce(Zturd) is. I am anxious to get it tuned and run it at the track and not be affraid of breaking the rear. Looking to see it make 630rwhp tomorrow. Then off to the track saturday.
Thanks Man your car is a work art too. I will be down and OCMD cruise weekend. I am staying at the crystal sands same place Bruce(Zturd) is. I am anxious to get it tuned and run it at the track and not be affraid of breaking the rear. Looking to see it make 630rwhp tomorrow. Then off to the track saturday.
Well just my luck on the dyno yesterday I was loosing fuel preasure. And I changed nothing in the fuel system from last year and only changed the meth. Now I have to figure out what is wrong with that and get it fixed this week and head back to the dyno
Your car looked great with the stock sleeper look, but that is badass looking. That stance is really cool with the narrowed rear. At least you dont have to worry about everytime you launch thinking(Is my 10 bolt going to explode).
