Track times
Thread Starter
LS1Tech Sponsor
iTrader: (12)
Joined: Nov 2001
Posts: 14,865
Likes: 6
From: Bridgewater,Ma
Track times Well, first off thanks to Keith,Josh and the rest that helped me with the car to get it ready.We were at the shop till 9:30 last night.
Car is the shop car that is a 99 TA,A4.
Parts
FLT level 5 tranny
Midwest Fab 9 rear with 3.73's
Yank SS 4000
American Racing 1 7/8 headers,no cats,Magnaflow cat back
LS6 intake,underdrive and 231 Cam
Scales were closed,guessing around 3600-3700lbs
DA was 2000' at 11am
Best run was
1.60 60'
11.86 at 112mph
I was ok with the time since the car dyno'd 370rwhp.Now we'll do a few changes to get power up to 400-410 were it needs to be.
Car is the shop car that is a 99 TA,A4.
Parts
FLT level 5 tranny
Midwest Fab 9 rear with 3.73's
Yank SS 4000
American Racing 1 7/8 headers,no cats,Magnaflow cat back
LS6 intake,underdrive and 231 Cam
Scales were closed,guessing around 3600-3700lbs
DA was 2000' at 11am
Best run was
1.60 60'
11.86 at 112mph
I was ok with the time since the car dyno'd 370rwhp.Now we'll do a few changes to get power up to 400-410 were it needs to be.
nice run for the 1st time out! Makes me want to buy an automatic and drag it lol
How do you find out the DA? did you have one of those hand held weather stations? I want to find out what it was for Saturday.
How do you find out the DA? did you have one of those hand held weather stations? I want to find out what it was for Saturday.
Thread Starter
LS1Tech Sponsor
iTrader: (12)
Joined: Nov 2001
Posts: 14,865
Likes: 6
From: Bridgewater,Ma
Someone told me the DA.Saturday was just as bad. I should of got it done sooner and went to the magic ATCO -1000 DA days and probly would of pulled a 11.4 ..LOL
Great day the the track Don, and great to see you having some fun 
Ted was flat out robbed in the first round, but atleast we can say we are both ahead of him in points (for the next few weeks anyway)
See you at the next race! or earlier if I can scounge up some $ for a set of headers
Ted was flat out robbed in the first round, but atleast we can say we are both ahead of him in points (for the next few weeks anyway)
See you at the next race! or earlier if I can scounge up some $ for a set of headers
Don your car was running great for the first time out. Little more weight reduction and tweaking will get you where you need to be.
Great to see you and Vinny get through the 1st round even though you guys arent quite dialed in yet.
Nate - a couple of the guys have weather stations that they are kind enough to share the results from.
It was cool to see the 2 toughest cars end up in the finals against each other for a change - even if they are sandbaggin old school race cars beatin up on a bunch of street cars.
I was actually kinda psyched to get the 67 big block mustng in the 1st round. I wanted to take him out sooooo bad.
Great to see you and Vinny get through the 1st round even though you guys arent quite dialed in yet.
Nate - a couple of the guys have weather stations that they are kind enough to share the results from.
It was cool to see the 2 toughest cars end up in the finals against each other for a change - even if they are sandbaggin old school race cars beatin up on a bunch of street cars.
I was actually kinda psyched to get the 67 big block mustng in the 1st round. I wanted to take him out sooooo bad.
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
It's an automatic car, I would expect it to do mid 11's with the mods. With cooler air from an nov/dec atco run should put it 2 tenths quicker. DA does make a huge diff as long as the car can still hook which again for a auto should not be that much of an issue. Congratz on the time. Your not far off from Cage requirements at least if you were in a NHRA track.
I still think about a built 4L60e or a 4L80e swap considering how well my mis-matched LT1 383 car did against alot of stuff on the street and the track. We will see.
I still think about a built 4L60e or a 4L80e swap considering how well my mis-matched LT1 383 car did against alot of stuff on the street and the track. We will see.
Nice Don!
Seriously that car with a stall and 9" put down 370 on a dyno jet. That's pretty impressive, the trap speaks for itself, especially in the heat.
Were you using nitto's? How do you like that Yank converter?
Fast intake and a little weight reduction you could run the 11.5 bracket before you touched the heads.
Wish I lived closer to you guys, you get to do all the fun stuff and all I get to do is hear about it
Seriously that car with a stall and 9" put down 370 on a dyno jet. That's pretty impressive, the trap speaks for itself, especially in the heat.
Were you using nitto's? How do you like that Yank converter?
Fast intake and a little weight reduction you could run the 11.5 bracket before you touched the heads.
Wish I lived closer to you guys, you get to do all the fun stuff and all I get to do is hear about it
It's an automatic car, I would expect it to do mid 11's with the mods. With cooler air from an nov/dec atco run should put it 2 tenths quicker. DA does make a huge diff as long as the car can still hook which again for a auto should not be that much of an issue. Congratz on the time. Your not far off from Cage requirements at least if you were in a NHRA track.
I still think about a built 4L60e or a 4L80e swap considering how well my mis-matched LT1 383 car did against alot of stuff on the street and the track. We will see.
I still think about a built 4L60e or a 4L80e swap considering how well my mis-matched LT1 383 car did against alot of stuff on the street and the track. We will see.
A 400hp stalled A4 is a pretty fun street car. Don was always the guy everytime he worked on my car said an auto was cheating, and now look lol
When my car was similarly modded, slightly smaller stall and cam it made 374 on the dyno (dynojet) and I ran a 11.9 @ 111-112, in probably lower temps than what Don had. You gotta remember the car weighs almost 3700lbs, thats' really pretty good for a cam only super streetable car in the heat. Cooler air makes a huge difference, I agree a good .2-.3. or so.
A 400hp stalled A4 is a pretty fun street car. Don was always the guy everytime he worked on my car said an auto was cheating, and now look lol
A 400hp stalled A4 is a pretty fun street car. Don was always the guy everytime he worked on my car said an auto was cheating, and now look lol
Like said I had a auto and if I lived closer or raced more often I think one would be going back in. Dont mind me, im thinking out loud.
Thread Starter
LS1Tech Sponsor
iTrader: (12)
Joined: Nov 2001
Posts: 14,865
Likes: 6
From: Bridgewater,Ma
Nice Don!
Seriously that car with a stall and 9" put down 370 on a dyno jet. That's pretty impressive, the trap speaks for itself, especially in the heat.
Were you using nitto's? How do you like that Yank converter?
Fast intake and a little weight reduction you could run the 11.5 bracket before you touched the heads.
Wish I lived closer to you guys, you get to do all the fun stuff and all I get to do is hear about it
Seriously that car with a stall and 9" put down 370 on a dyno jet. That's pretty impressive, the trap speaks for itself, especially in the heat.
Were you using nitto's? How do you like that Yank converter?
Fast intake and a little weight reduction you could run the 11.5 bracket before you touched the heads.
Wish I lived closer to you guys, you get to do all the fun stuff and all I get to do is hear about it
I've got some parts coming that will put me past 11.5 in the heat
If I get bored the C5R 427ci motor will be put in.
The converter did good but my 10" ET street's didn't like it.The 60's were the best of 1.58 and worst of 1.62. I had no test time to see where the magic stall is but it can be footbraked to 3800rpm.
I've got some parts coming that will put me past 11.5 in the heat
If I get bored the C5R 427ci motor will be put in.
I've got some parts coming that will put me past 11.5 in the heat
If I get bored the C5R 427ci motor will be put in.
I want a converter than can tear my stomache out
8 second mod
iTrader: (37)
Joined: Nov 2002
Posts: 17,879
Likes: 1
From: East Side Performance! mASShole
those numbers seem to be pretty close to where they should be.
the couple cam only cars i have done run in the 11.4-11.6 range but they are running threw stock 10 bolts.
chris has my custom 232 cam in his car, pascetter headers (junk) a cut out air lid, 3:73's in his 10 bolt, MT et drad radials full weight car with all options, and he went 11.5 in ok weather. not great, but ok.
the couple cam only cars i have done run in the 11.4-11.6 range but they are running threw stock 10 bolts.
chris has my custom 232 cam in his car, pascetter headers (junk) a cut out air lid, 3:73's in his 10 bolt, MT et drad radials full weight car with all options, and he went 11.5 in ok weather. not great, but ok.
Thread Starter
LS1Tech Sponsor
iTrader: (12)
Joined: Nov 2001
Posts: 14,865
Likes: 6
From: Bridgewater,Ma