Picked up a new ride....(pics inside)
#1
TECH Fanatic
Thread Starter
Join Date: Nov 2001
Location: High Point North Carolina
Posts: 1,260
Likes: 0
Received 0 Likes
on
0 Posts
Picked up a new ride....(pics inside)
'95 GT....
327" (stock bore, motor is girdled)
Tremec 5 speed (brand new)
AFR 185s
Holley systemax
Custom cam
Aeromotive fuel system
3.90 gears, built 31 spline, girdled etc etc
Mac 1 3/4 headers into dumps
Paxton Novi 2000
13" front Cobra brakes, 11.5" rear
The car still has the stock fugly 17" tri-spoke wheels. I will likely keep them on the car and run a drag radial/slick on them to keep a stock appearance. The blower will support a ton of boost. For now its pullied way down. I want to get used to the car first, then I'll put on a slightly smaller pulley and look to make 12 lbs. I'll keep it pretty tame....
Only 46k miles....
This pic was taken a couple months ago, the car now has no rear wing. The holes were filled in by a body shop.
Novi 2000
The stock wheels are still on it. It looks 100% stock from the outside. (no wing now)
I took this pic tonight (Thurs night, 11:30pm) just to show its in my garage....
also taken a few months back....I'll get some new pics this weekend hopefully showing no wing....
The Novi ID plate
327" (stock bore, motor is girdled)
Tremec 5 speed (brand new)
AFR 185s
Holley systemax
Custom cam
Aeromotive fuel system
3.90 gears, built 31 spline, girdled etc etc
Mac 1 3/4 headers into dumps
Paxton Novi 2000
13" front Cobra brakes, 11.5" rear
The car still has the stock fugly 17" tri-spoke wheels. I will likely keep them on the car and run a drag radial/slick on them to keep a stock appearance. The blower will support a ton of boost. For now its pullied way down. I want to get used to the car first, then I'll put on a slightly smaller pulley and look to make 12 lbs. I'll keep it pretty tame....
Only 46k miles....
This pic was taken a couple months ago, the car now has no rear wing. The holes were filled in by a body shop.
Novi 2000
The stock wheels are still on it. It looks 100% stock from the outside. (no wing now)
I took this pic tonight (Thurs night, 11:30pm) just to show its in my garage....
also taken a few months back....I'll get some new pics this weekend hopefully showing no wing....
The Novi ID plate
#3
TECH Fanatic
Thread Starter
Join Date: Nov 2001
Location: High Point North Carolina
Posts: 1,260
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by aliwantsnss
Looks nice kenny, didnt take long for you to get a new toy!
#4
Nice....I've known that car since the summer of 2001, still looks as clean as it did then too. I remember you, me, Sean, Mike and I think Ron cruising around Toms River and going to some of the 'spots', good times.
This could be a really fun (and fast ) car for you man, be careful and congrats.
This could be a really fun (and fast ) car for you man, be careful and congrats.
#6
Originally Posted by LS1LT1
I remember you, me, Sean, Mike and I think Ron cruising around Toms River and going to some of the 'spots', good times.
Yup those were good times Marc
#7
TECH Fanatic
Thread Starter
Join Date: Nov 2001
Location: High Point North Carolina
Posts: 1,260
Likes: 0
Received 0 Likes
on
0 Posts
You gonna be around this weekend Mike? I called you a couple times, left a message....never caught up with you....
Don't avoid my calls or you will wind up getting 4am drunk phone calls from drunk southerners like Marc gets....
Don't avoid my calls or you will wind up getting 4am drunk phone calls from drunk southerners like Marc gets....
Trending Topics
#8
Originally Posted by Kenny H
Don't avoid my calls or you will wind up getting 4am drunk phone calls from drunk southerners like Marc gets....
#11
CARTEK Racing
iTrader: (13)
Join Date: Nov 2001
Location: East Brunswick, NJ
Posts: 2,182
Likes: 0
Received 0 Likes
on
0 Posts
Even thought its a Mustang I will still say Congrats!
To bad I was not in the country the week you chose to pick it up, but I'm sure I'll see it soon. Good luck and get some stick driving lessons from Tolbert.
To bad I was not in the country the week you chose to pick it up, but I'm sure I'll see it soon. Good luck and get some stick driving lessons from Tolbert.
#16
TECH Fanatic
Thread Starter
Join Date: Nov 2001
Location: High Point North Carolina
Posts: 1,260
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by WS6TransAm01
Even thought its a Mustang I will still say Congrats!
To bad I was not in the country the week you chose to pick it up, but I'm sure I'll see it soon. Good luck and get some stick driving lessons from Tolbert.
To bad I was not in the country the week you chose to pick it up, but I'm sure I'll see it soon. Good luck and get some stick driving lessons from Tolbert.
I will get a slightly smaller pulley on there and then have it tuned on 12 lbs. Regardless of what rwhp it makes, it will be me that holds it back. I need to get to the track and get some quality seat time in the car and see what I can do....
With 3.90s, those gears sure do go by fast!
#20
TECH Fanatic
Thread Starter
Join Date: Nov 2001
Location: High Point North Carolina
Posts: 1,260
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Mike 00'SS
I may smell, but your still gay .