Cartek 4x H/c = 10.41 @ 131.15
#1
CARTEK Racing
Thread Starter
iTrader: (13)
Join Date: Nov 2001
Location: East Brunswick, NJ
Posts: 2,182
Likes: 0
Received 0 Likes
on
0 Posts
Cartek 4x H/c = 10.41 @ 131.15 **UPDATE**
CARTEK installed their new clutch design in my car a few weeks ago and last night I went to test it out at Atco. The clutch felt awesome, the results were promising [10.53 @ 130+ with a 1.42 60'] so I figured it would be worth it to call out of work and go to E-Town tonight.
The car was spinning off the line, but with enough tire I guess even with spin you can pull a decent 60' The 60's were still not what I wanted, and nowhere near my best 60's but the car still performed.
First pass off the street after swapping to slicks from street tires:
5900rpm launch [very low for me]
60'......1.460
1/8......6.703
MPH....102.17
1/4......10.496
MPH.....130.43
First pass and a new best? Tis was going to be a good night.
After a 10.50 and a 10.51 with even crappier 60's I figured out the launch sweet spot for the current track conditions.
4th pass was as fallows:
60'......1.445
1/8......6.674
MPH....102.61
1/4......10.457
MPH.....130.90
5th pass was the best, and gave me a chubby when I saw the slip
60'......1.452
330'.....4.282
1/8......6.652
MPH.....103.51
1000'....8.696
1/4......10.417
MPH.....131.15
Don't forget it still a stock 6speed with stock rods, stock pistons, stock crank. Its a stock bottom end with a bolt on set of heads and a cam that anyone can call CARTEK and get.
My ultimate goal for this set up was a 10.39 and I think just based on the crappyness of tonights 60's its very possible. I just have to get my 60's back into the 1.40-1.42 range and I am golden!
I know I have said this a million times, but;
I can not thank CARTEK enough. Over the years they have been awesome friends and the best shop I could have ever asked for. They have build me one hell of a setup.
Thank You Dave
Thank You Julio
Thank You Mike
Thank You Roy
Thank You Rich
Hell even thank you Julian for answering the phone and taking such wonderful messages!
CARTEK is the best. If I had the cash I would hire a few chicks to polish each of their *****! I cant thank you guys enough! I love this set up.
The car was spinning off the line, but with enough tire I guess even with spin you can pull a decent 60' The 60's were still not what I wanted, and nowhere near my best 60's but the car still performed.
First pass off the street after swapping to slicks from street tires:
5900rpm launch [very low for me]
60'......1.460
1/8......6.703
MPH....102.17
1/4......10.496
MPH.....130.43
First pass and a new best? Tis was going to be a good night.
After a 10.50 and a 10.51 with even crappier 60's I figured out the launch sweet spot for the current track conditions.
4th pass was as fallows:
60'......1.445
1/8......6.674
MPH....102.61
1/4......10.457
MPH.....130.90
5th pass was the best, and gave me a chubby when I saw the slip
60'......1.452
330'.....4.282
1/8......6.652
MPH.....103.51
1000'....8.696
1/4......10.417
MPH.....131.15
Don't forget it still a stock 6speed with stock rods, stock pistons, stock crank. Its a stock bottom end with a bolt on set of heads and a cam that anyone can call CARTEK and get.
My ultimate goal for this set up was a 10.39 and I think just based on the crappyness of tonights 60's its very possible. I just have to get my 60's back into the 1.40-1.42 range and I am golden!
I know I have said this a million times, but;
I can not thank CARTEK enough. Over the years they have been awesome friends and the best shop I could have ever asked for. They have build me one hell of a setup.
Thank You Dave
Thank You Julio
Thank You Mike
Thank You Roy
Thank You Rich
Hell even thank you Julian for answering the phone and taking such wonderful messages!
CARTEK is the best. If I had the cash I would hire a few chicks to polish each of their *****! I cant thank you guys enough! I love this set up.
Last edited by WS6TransAm01; 03-24-2007 at 02:43 PM.
#3
CARTEK Racing
Thread Starter
iTrader: (13)
Join Date: Nov 2001
Location: East Brunswick, NJ
Posts: 2,182
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Jersey_TA
Holy crap. Nice runs Alex!!!! Congrats on the new best.
Thanks Rob!
And the best part was that after the night was over, I pus my street tires back on and the GF and I took the car to Applebee's where she bought me a Guiness to celebrate! LOL
#7
Nice runs.. I met you and seen your car run last year at E-town...
Had my car at Cartek at the begining of the month for there 2x cam and a clutch.. They do great work.
Ben
Had my car at Cartek at the begining of the month for there 2x cam and a clutch.. They do great work.
Ben
Trending Topics
#13
CARTEK Racing
Thread Starter
iTrader: (13)
Join Date: Nov 2001
Location: East Brunswick, NJ
Posts: 2,182
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by aliwantsnss
Alex, awesome job! I guess you wore your lucky Ferrari hat.
#14
CARTEK Racing
Thread Starter
iTrader: (13)
Join Date: Nov 2001
Location: East Brunswick, NJ
Posts: 2,182
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by JS
A good combo,decent da,your skinny butt and u can row with the best of them..
VERY IMPRESSIVE Alex.....
VERY IMPRESSIVE Alex.....
Thanks a lot guys for the kind words! I can't wait to hit the track again for my 10.39! That would ROCK!
#15
11 Second Club
iTrader: (1)
Join Date: Oct 2002
Location: new jersey
Posts: 689
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by WS6TransAm01
Thanks JS. I guess with Drag Racing and Horse Racing being skinny is a good thing. LOL
Thanks a lot guys for the kind words! I can't wait to hit the track again for my 10.39! That would ROCK!
Thanks a lot guys for the kind words! I can't wait to hit the track again for my 10.39! That would ROCK!
#19
CARTEK Racing
Thread Starter
iTrader: (13)
Join Date: Nov 2001
Location: East Brunswick, NJ
Posts: 2,182
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Quick Time
Nice times Alex hope you can better your times this saturday at our EFI Event.
It will be warmer and a chance of rain. But new best or not if the weather holds out I want to run the event.