BlazinT/A

iTrader: (10)

put my new cam in last night, started it this morning and had some weird noises but all guages were fine, so i went to bring it home and lost 10psi of oil pressure. i figured it was just the pick up o-ring so i stopped at my parents house which is like 2.5 miles from daves to see if maybe i had missed something when we reassembled everything. went to restart it and i got a mean *** back fire through the intake so i put it on jack stands and called the gm dealership for new gaskets and seals. took it apart a found that the cam timing was off by two degrees and now i have a broken valve (maybe more i havent taken the head off yet). stupid mistake on my part should have payed a little more attention. so if any one has some 241 heads or ls6 heads let me know.

Slowhawk

iTrader: (12)

That sucks.I'm guessing 2 teeth off? I'll call to see if the LS6 heads are still available.If not and your tight I might have old heads laying around at my house.

BlazinT/A

iTrader: (10)

hey thanks alot hopefully i dont have to get a new short block too im close to broke

Joe "Preachers Sheets" DIESO

iTrader: (4)

you better break something in work and tell them you need to stay late to fix it. get some extra loot.

Speedy0009

iTrader: (7)

That sucks man... Hopefully things will turn out alright for ya. Good luck!

BTLFEDSS

iTrader: (12)

Sorry to hear that,It's all part of working on cars,if all you broke was a valve your lucky
BTLFEDSS

8ALTNG

iTrader: (1)

Don~ He can use my p/p LS1s that are at your house if he wants.

My84Z

iTrader: (18)

Sorry to hear that bud I know you were stoked about getting it all set when we were talking. On the bright side though broken parts mean time for upgrades

BlazinT/A

iTrader: (10)

yeah i was bummed for a bit but i think its all gonna work out i just got to get some cash together, by the way guys thank for the support

Dieso: if you want i can see if i can drop that rear off tomorrow

Joe "Preachers Sheets" DIESO

iTrader: (4)

blazin, yes please let me know if you can so i can arrange a pick up asap.

badpewter-z

iTrader: (4)

sorry to hear man i know you were excited about the cam

BlackScreaminMachine

iTrader: (17)

Awww man, that sucks, but hopefully you can get it back together before the summer is over!

Joe "Preachers Sheets" DIESO

iTrader: (4)

if it's just a valve it's gonna be tit.

DannoWS6

iTrader: (5)

I got stock heads if you need em' or valves if you just need those.

BlackScreaminMachine

iTrader: (17)

FYI, if you bent a valve, i.e. kissed a piston, magnaflux the piston you can get the kit from Eastwood. I used and it works mint!

Joe "Preachers Sheets" DIESO

iTrader: (4)

check your pm's blazin

BlazinT/A

iTrader: (10)

well im not going to touch it today and ill be in maine sunday so fi prolly wont touch it until monday morning or so, hopefully i dont have a hole in my piston. lol but if i didnt have bad luck id have no luck at all.

davered00ss

iTrader: (4)

Brandon, I thought you were going to tear into it today to see?