Some pics of the car with wheelie bars.
#1
8 second mod
Thread Starter
iTrader: (37)
Join Date: Nov 2002
Location: East Side Performance! mASShole
Posts: 17,879
Likes: 0
Received 0 Likes
on
0 Posts
Some pics of the car with wheelie bars.
i did get to test the bars this weekend didnt hit them hard, i still have so adjusting to make, but i marked the wheels up and the mars where all gone.
ended up at a 9.7 na first pass
2nd pass i was super rich do to low bottle pressure and because the weather was a little cooler i added a 1/4 pound to the nitrous fuel and ended up with a very fat 9.1 @ 146 i did get to test the bars on this one 1.32 60 foot but just lost all the power up top due to rich.
3rdpass i took the 1/4 pound out, and had the bottle up to 950 ready to go, did my burn out, pull up. let the brake go and bang tires went up in a blaze. i let out jumped back in it. car ran much better and back halfed real good but ended up with a 1.59 60 foot my car on spray has never run slower then a 1.3x in the past 3-4 years so im guessing there was somthing on the track cuz when i got back in it i was fine. the guy infront of me spun as well. anyway.
here are a few pics of the car all cleaned up and the bars all installed as well as the new fuel cell all polished and the motor with all the new lines etc. still have a few things to button up and clean up, but she's looking pretty good.
ended up at a 9.7 na first pass
2nd pass i was super rich do to low bottle pressure and because the weather was a little cooler i added a 1/4 pound to the nitrous fuel and ended up with a very fat 9.1 @ 146 i did get to test the bars on this one 1.32 60 foot but just lost all the power up top due to rich.
3rdpass i took the 1/4 pound out, and had the bottle up to 950 ready to go, did my burn out, pull up. let the brake go and bang tires went up in a blaze. i let out jumped back in it. car ran much better and back halfed real good but ended up with a 1.59 60 foot my car on spray has never run slower then a 1.3x in the past 3-4 years so im guessing there was somthing on the track cuz when i got back in it i was fine. the guy infront of me spun as well. anyway.
here are a few pics of the car all cleaned up and the bars all installed as well as the new fuel cell all polished and the motor with all the new lines etc. still have a few things to button up and clean up, but she's looking pretty good.
#2
9 Second Club
iTrader: (6)
Join Date: Feb 2004
Location: Glen Burnie Md.
Posts: 320
Likes: 0
Received 0 Likes
on
0 Posts
the setup looks tight! I think its time to get rid of the ground effects though lol.... I see your still running a fuel cell, ever thought about gettin rid of the stand alone, what fuel pump are you running?
#3
8 second mod
Thread Starter
iTrader: (37)
Join Date: Nov 2002
Location: East Side Performance! mASShole
Posts: 17,879
Likes: 0
Received 0 Likes
on
0 Posts
i like the ground FX they wont be coming off.
im not running the rear cell anymore. the alum one up front runs the car and nitrous. its a magnafuel 625
the cell holds a little over 4 gall, it runs from the cell to a filter to the pump threw the rails into a regulator, from the regualtor to a kick down regulator which goes to the noid and return.
im not running the rear cell anymore. the alum one up front runs the car and nitrous. its a magnafuel 625
the cell holds a little over 4 gall, it runs from the cell to a filter to the pump threw the rails into a regulator, from the regualtor to a kick down regulator which goes to the noid and return.
Trending Topics
#15
8 second mod
Thread Starter
iTrader: (37)
Join Date: Nov 2002
Location: East Side Performance! mASShole
Posts: 17,879
Likes: 0
Received 0 Likes
on
0 Posts
thanks guys. i happy for sure.
matt, like fire ball said.
the car is super clean, washed, waxed and rims polished.
i leave the rubber on it, i accually was and wax around it. i like the way it looks
matt, like fire ball said.
the car is super clean, washed, waxed and rims polished.
i leave the rubber on it, i accually was and wax around it. i like the way it looks