Official Polk County thread!
I sure hope someone gets there car back together or at least to the track soon! I need new race and street tires on the car and my daughters Yukon also needs new tires!!!! I’ve been driving with my front tires showing threads on the outside because it also needs an alignment. 
. I just don’t have the time to get anything done anymore I have the money for most just don’t have the time. I guess I will soon need to make some time because I need a break.
. I just don’t have the time to get anything done anymore I have the money for most just don’t have the time. I guess I will soon need to make some time because I need a break. ordered a new shifter too. the stock one is pretty sloppy. hits the gear I want sometimes. new one should be here near the end of the week. Mike, I'm going to try to rig some mufflers up onder the car so I can drive it until I get the chance to go get my y-pipe made. so that way I can meet you somewhere more convenient for you
ordered a new shifter too. the stock one is pretty sloppy. hits the gear I want sometimes. new one should be here near the end of the week. Mike, I'm going to try to rig some mufflers up onder the car so I can drive it until I get the chance to go get my y-pipe made. so that way I can meet you somewhere more convenient for you
[QUOTE=BLINGOLE]Awwe boo that means you work Thursday so that leaves the dragstrip out.QUOTE]
I work about 6 days a week, maybe 7. It's getting old real quick! Hope it doesn't rain this week. Haven't been out anywhere in 3 months.
I work about 6 days a week, maybe 7. It's getting old real quick! Hope it doesn't rain this week. Haven't been out anywhere in 3 months.
mike my plans were thwarted by work today. had an easy half day of stuff to do, had it all lined up to get off early and take the car to pitts and have the y pipe built, then call you about tuning it tonight, but got called out on an emergency and had to work late. it always happens
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
ok guys I'm about to start my 4.8L hx55 powered nissan 300zx (z31) swap and I'm in need of either a TH350, TH400, or 700r4? so if anyone has one they are willing to let go for pretty cheap or knows anyone letting go of one for cheap let me know!
On The Tree
Joined: Aug 2011
Posts: 131
Likes: 0
From: Lakeland, Fl
Who Installs Headers Who, around Polk will install headers and is reasonable on their labor rates? I just bought a 2002 Z28 and in a couple of months I am looking at getting a set installed (long tube). Right now, I am just shopping around for an installer.
Give me a pm when your ready and I can get ya setup. Or pm me and ill send ya my phone number.
I guess it all really comes down to if you want it for track,street or cheap *** ****.
Figure up your length and your budget and get with me. I hav a few trans case's laying around and some parts.
Last edited by BLINGOLE; Sep 7, 2011 at 10:47 AM.
Ahoy hearties, if I ave' enough treasure I'm goin' t' go t' th dragstrip Thursday. If anyoneelse wants t' go tell me. If nay Saturday night so we can get greg t' come an' ave' a better track.
As for the car I cant find any skinny’s (165-15's) for the front everyone is sold out or just doesn’t carry them. I can get some M/T's but I dont want to spend the money for them if I dont have to. So if any of you know where to get any PLEASE let me know ASAP!!
On The Tree
Joined: Aug 2011
Posts: 131
Likes: 0
From: Lakeland, Fl
Thanks again.
saturday might be better track night for me. I still haven't been able to get my exhaust done. work keeps throwing last minutes hit on me preventing me from going to get it done. but I am making it a point to get it done this week or saturday morning
I hear ya!!!!! I do have goooooood news at least for me!!! I worked on my Busa this past weekend and found my oil leak (cracked oil pan) all fixed and ready to hit the track again. It has been so long since I have run it, it is going to take a little while to get back in the swing of things. Give me a month or so and we will be spraying it again!!!!!!!!!!!! I suspect the first two or three times back out on it I will only manage mid 6's but we will be right near the 5.0 mark soon enough.
As for the car I cant find any skinny’s (165-15's) for the front everyone is sold out or just doesn’t carry them. I can get some M/T's but I dont want to spend the money for them if I dont have to. So if any of you know where to get any PLEASE let me know ASAP!!
As for the car I cant find any skinny’s (165-15's) for the front everyone is sold out or just doesn’t carry them. I can get some M/T's but I dont want to spend the money for them if I dont have to. So if any of you know where to get any PLEASE let me know ASAP!!
If anybody in Lakeland or central fl looking for a built ls1 I have one for cheap. Ended up going with a 6.0. It's a ls6 block, balanced crank, eagle Hbeam rods, arp bolts, dish pistons with valve release, comp 564/567 cam, 241 ported heads, beehive springs, comp 7.250 hardend push rods, gto vented oil valley cover, smoothed de butted oil valley, valve covers, water pump, $1500. Only thing it needs is a threaded rod or stud put on the starter ear was from the starter breaking it off. Simple fix with motor out of car. Free engine stand! Call anytime at 863(797)(3435), I'm on the north side.