Anyone From Pensacola post up with Pics!!
09-18-2005, 03:16 AM
#582
On The Tree
Join Date: Nov 2004
Location: PENSACOLA,FL
Posts: 190
Likes: 0
Received 0 Likes
on
0 Posts
There Is Gonna Be A Car Show, Bikini Contest, And Other Stuff Going On At Bamboo ******* On Pensacola Beach And The Money Is Going To Help The Victims Of Hurricane Katrina Just Letting You Guys Know And Wondering Who All Is Going And Figure This Would Be A Good Chance To Maybe Set Up A Cruise....anyway Let Me Know
09-18-2005, 07:55 PM
#585
Staging Lane
Join Date: May 2005
Location: Biloxi, MS
Posts: 52
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by USMARINE1108
Hey TransLs1, I think I've parked next to you a few times on base. Good looking car!
Are you the one that bought Johns stuff after Hawthore beat you?? If so your **** is gonna run strong it worked good in the blue bastard... I wish you the best
09-18-2005, 11:39 PM
#587
Originally Posted by HALL182
Are you the one that bought Johns stuff after Hawthore beat you?? If so your **** is gonna run strong it worked good in the blue bastard... I wish you the best
You mean when he had no 3rd gear, and a passanger in the car? haha. yea, that's me. I'm not sure what happened on that one! And no, that's not why I got the H/C. I've been looking for a setup like that since I got the car. It won't be exactly the same on my car, but it should work alright.
09-23-2005, 10:18 PM
#595
TECH Apprentice
Join Date: Nov 2004
Posts: 314
Likes: 0
Received 0 Likes
on
0 Posts
Alot is going on.
Apparently my cam bolts backed themselves out of the cam and allowed the timing sprocket to loosen, which then broke the cam alignment dowel completely off the cam (which fell into my oil)
The cam either walked backward or forward into the motor, not far enough to ruin the motor but I am afraid it either did some damge to my bearings or my lifters. There is now a very audible tapping/ticking noise coming from my motor.
Rockers are fine, I checked the pushrods and none were bent from what I could tell. Car idles just a little bit rougher now. Runs fine. Although the stuttering that has always been there is now alot more noticable.
So basically I have no idea what is going on with my motor. Wish me luck.
Luke
Apparently my cam bolts backed themselves out of the cam and allowed the timing sprocket to loosen, which then broke the cam alignment dowel completely off the cam (which fell into my oil)
The cam either walked backward or forward into the motor, not far enough to ruin the motor but I am afraid it either did some damge to my bearings or my lifters. There is now a very audible tapping/ticking noise coming from my motor.
Rockers are fine, I checked the pushrods and none were bent from what I could tell. Car idles just a little bit rougher now. Runs fine. Although the stuttering that has always been there is now alot more noticable.
So basically I have no idea what is going on with my motor. Wish me luck.
Luke
09-24-2005, 03:46 PM
#597
12 Second Club
Thread Starter
Join Date: Dec 2004
Location: Eglin AFB Shalimar, FL
Posts: 269
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by TNC_LS1
andrew how did you do your sign???
It's the 3rd Sticky from the top, just send the guy some pics and he will e-mail it to you.
09-28-2005, 02:47 PM
#600
12 Second Club
Thread Starter
Join Date: Dec 2004
Location: Eglin AFB Shalimar, FL
Posts: 269
Likes: 0
Received 0 Likes
on
0 Posts
Luke did you ever get around to fixing your car, or find out what your going to do? Oh yeah and by the way my wife is selling her car, if you guys wanna spread the word before i put it in auto trader. it's a White 2000 Grand Am let me know.--Andrew