TNC_LS1

[QUOTE=98BirdLS1]Hey Thomas, I still vote for replacing those "snoop dogg" rims.

IM TRYING TO GET THE BLACK ZR1S 17X9.5 AND 17X11 THERE LIKE $400 ON EBAY+ SHIPPING I WAS JUST WONDERING ABOUT THAT CAM CUZ IT WAS LIKE $200

98BirdLS1

ZR-1's are stupid looking, don't get those, EVERYBODY has them! And if you can find them get them with tires, cause 315's are a pretty penny by themselves.

Oh and I vote for black with a polished lip.

TNC_LS1

i can get the zr1s for $400 i wanted to get the black zo6 wheels but they are $650

HALL182

Ben, Reagans car looked awesome going down the track the other night i have a video of it. The track didnt seem to hook to well maybe more cars with skicks was needed. Cant wait to see your beast out soon. Hopefully by the next race I will make some better passes.

2hotrods

I have a cam. Custom Grind Comp Cams .224/.224/.581 112 LSA. It was in my Heads/Cam LS-1 for about 10K miles when I spun a rod bearing. Had the whole engine re-done. Builder suggested replacing the cam "as a precaution" which we did, but close inspection later revealed no damage to the cam at all. I'll sell it to you for $175.00, it's a $380.00 cam new from Comp Cams. With ported heads, this cam makes 401 rwhp thru an LS-6 intake, ported iron manifolds and a single 3" exhaust w/ Magnaflow Muffler. It has decent street manners as well. A carbon copy of it (same part number from Comp Cams) is currently in my car.

E-mail or PM me if interested.

Rick

TransLS1

hey luke, what #'s are you putting down at the track?

98BirdLS1

Stock I ran a 13.6 @ 105. I think it was a 2.1 60'

With a lid and 315 DR's I ran 9.0 @ 81 . But I think my smoking (literally) clutch had something to do with that.

I have no idea what I will run now. Hopefully my clutch will be in the car Friday afternoon and it'll take me a week or so to get it broken in. Then FINALLY I can see some numbers.

Luke

TransLS1

cool im hopefuly i get my headers and im looking at the MTI R1 cam end of this week or next week.

98BirdLS1

Andrew, you should look into some gears. I'd believe with a cam like the R1 your car is gonna suck to drive with the 2.73. I may be wrong.

Definately something to look into though.

Luke

SSLOW

iTrader: (1)

hey everyone . . . . when we gonna go for a cruise?

TNC_LS1

I HAVE BEEN WONDERING THAT SAME THING FOR A LONG TIME SOMEONES GONNA HAVE TO STEP UP AND SET UP EVERYTHING

TransLS1

Im Ordering My Jet-hot Lt's Tomorrow, I Will Need Some Help With The Install If Anyone Can Help Me Out. Also Can You Modify The Stock Y Pipe To Fit Lt's---andrew

TransLS1

Luke, Im Also Gonna Get A Set Of 3.42's Im Gonna Put In Or Have Someone Help Me Out.---andrew

98BirdLS1

Andrew, long tubes are a pretty easy install, just time consuming and frustrating. Make sure you get the car as high as possible and have patience. I had to grind some things down a little to get mine to fit.

And long tubes won't fit the stock y-pipe with out some major modification, and some reducers from 3-in to 2.25-in. Its easier to just get an aftermarket one, or have a shop fab one up.

As far as the gears, look into some 3.73's. You'll feel the change much more, also like Ben said definately have someone professional install them. One little mess up and you can ruin alot more than just the gear setup.

Good luck

TransLS1

cool thanks man i think im gonna get a Y pipe and the gears i will do that thanks again.---ANDREW

TNC_LS1

I Second The 3.73 You Will Regret It If You Dont Get Em

TransLS1

JET-Hot coated LT's are on the way I set off for them today! I am happy just thought i would share that.

1BDHWK

iTrader: (18)

Sweet Andrew, you will love them. Maybe one of these days, when I have a minute to spare from work, I'll be able to get out and see everyone's cars. I hope to find some time to finish my garage art here in the next century, so I can join you fellas on the road .

98BirdLS1

Sounds great Andrew. Are you buying a y-pipe or having one made? Everyone's cars are really coming along, well except for Ben's. But he's all talk anyways

I got my Spec 3 in yesterday and I'm driving as much as I can to get past the break-in period. We should all head to the track sometime. I'd like to see what I can do with a proper clutch and some suspension stuff.

On another note, anyone have any reccomondations for rear-ends? I have to get a 12-bolt b/c of my 3 channel. And it has to be 100% streetable since I put so many miles on it. A moser with a HD posi should be fine for my limited track use, I hope. And how hard is it to install if the gears are already set-up?

Luke

slimcracka

iTrader: (7)

im looking for some 17x9 & 11 black zr1s with tires anyone have any for sale or know anyone that has some for sale