AR Headers tomorrow
#41
Yeah, the 2nd run, I had the heater wide open at the windshield, which actually should get the thermostat opening to push cooler water through the motor. Dunno if it made a difference ... sun through 1st and 2nd on my last run because of some oil on the track.
#43
1st run, the MPH was 114 ... have no idea what it would have been if I hadn't eased out of the throttle 'cause I couldn't see ... didn't back out of it much, but, it was about a second or so before I hit the traps. I cut a 1.8 flat and didn't launch very hard, so, the Nitto's hooked fairly well on the first run ... just wish i hadn't let off.
2nd run, Nitto's just have a really hard time getting off the line, combined with the fact the guy was running a mop over some oil at the tree area. Spun through 1st and most of 2nd with a nasty 60" time of 2.24 and still pulled off the same MPH.
I'll be going back out tomorrow night with my son and hope to hit 11's on the Nitto's ... so close last night, but, just not meant to be, I guess. I'll nail 'em if the Nitto's will stick. All-in-all, the car;s got a little more in it, but, I don't expect a whole lot more than last night until I come back in January with MT Street DR's. Those things hook dead-on everytime ... cut a 1.70 on cold tires last time out with the MT's.
P.S.: If I hadn't painted that black hood, it would have at least knocked off 3/10's off my ET ... hehehe!!!
2nd run, Nitto's just have a really hard time getting off the line, combined with the fact the guy was running a mop over some oil at the tree area. Spun through 1st and most of 2nd with a nasty 60" time of 2.24 and still pulled off the same MPH.
I'll be going back out tomorrow night with my son and hope to hit 11's on the Nitto's ... so close last night, but, just not meant to be, I guess. I'll nail 'em if the Nitto's will stick. All-in-all, the car;s got a little more in it, but, I don't expect a whole lot more than last night until I come back in January with MT Street DR's. Those things hook dead-on everytime ... cut a 1.70 on cold tires last time out with the MT's.
P.S.: If I hadn't painted that black hood, it would have at least knocked off 3/10's off my ET ... hehehe!!!
#45
11 Second Club
iTrader: (46)
Join Date: Feb 2004
Location: jacksonville, fl
Posts: 1,667
Likes: 0
Received 0 Likes
on
0 Posts
1st run, the MPH was 114 ... have no idea what it would have been if I hadn't eased out of the throttle 'cause I couldn't see ... didn't back out of it much, but, it was about a second or so before I hit the traps. I cut a 1.8 flat and didn't launch very hard, so, the Nitto's hooked fairly well on the first run ... just wish i hadn't let off.
2nd run, Nitto's just have a really hard time getting off the line, combined with the fact the guy was running a mop over some oil at the tree area. Spun through 1st and most of 2nd with a nasty 60" time of 2.24 and still pulled off the same MPH.
I'll be going back out tomorrow night with my son and hope to hit 11's on the Nitto's ... so close last night, but, just not meant to be, I guess. I'll nail 'em if the Nitto's will stick. All-in-all, the car;s got a little more in it, but, I don't expect a whole lot more than last night until I come back in January with MT Street DR's. Those things hook dead-on everytime ... cut a 1.70 on cold tires last time out with the MT's.
P.S.: If I hadn't painted that black hood, it would have at least knocked off 3/10's off my ET ... hehehe!!!
2nd run, Nitto's just have a really hard time getting off the line, combined with the fact the guy was running a mop over some oil at the tree area. Spun through 1st and most of 2nd with a nasty 60" time of 2.24 and still pulled off the same MPH.
I'll be going back out tomorrow night with my son and hope to hit 11's on the Nitto's ... so close last night, but, just not meant to be, I guess. I'll nail 'em if the Nitto's will stick. All-in-all, the car;s got a little more in it, but, I don't expect a whole lot more than last night until I come back in January with MT Street DR's. Those things hook dead-on everytime ... cut a 1.70 on cold tires last time out with the MT's.
P.S.: If I hadn't painted that black hood, it would have at least knocked off 3/10's off my ET ... hehehe!!!
I can't wait to hear about how your car does tonite. Good luck and be sure to post.
#46
Thanks Wesley and thanks 68birdls1. Today, I removed the lower front air dam and the rubber seal from the back of the hood near the windshield. With nearly the same identical 60' as Wednesday (1.768 on the Nitto's), I picked up 1/10th and 2 MPH. Didn't break 11's this time out, but, I did get within 3/100's. All-in-all I was pleased with both runs I did.
1st run > best times yet and mph, as well.
2nd run > got the opportunity to race against Dave's (Caveman) 6.0 GTO. Now THAT was a real priviledge.
Great night out at the track and met some good people tonight, as well.
1st run > best times yet and mph, as well.
2nd run > got the opportunity to race against Dave's (Caveman) 6.0 GTO. Now THAT was a real priviledge.
Great night out at the track and met some good people tonight, as well.
#47
12 Second Club
iTrader: (7)
Yeah, LS1Freak had a set of 1 3/4" AR's installed. I saw his and just had to have a set installed. Will be going to the track tonight at Bithlo, so, we'll see how the car performs at the track. Hopefully, I won't be disappointed ... on Nitto's so I'll be launching easy to get out of the hole. But, in January, I'll be back on MT Street DR's.
#49
It's always good seeing you there, as well ... or anywhere else for that matter. I was happy to see you pull up in the staging lane right beside me. The opportunity to race you, no matter which car you were driving, was a welcome one. Thanks for letting me win ... lol .... j/k. Yessir, it was a good race and I had a lot of fun that night.
On that race, I had a 1.80 60' on the Nitto's and ET'd 12.1 flat @ 114.57 mph. My next time out will be with MT street DR's and a 21mm Strano hollow rear bar .... trying to break into 11's seems near impossible for this car ... should be easy mid-11's, however, 'something just ain't gettin' me there'.
Dave, hope your Christmas was a Christmas shared with lots of family and friends. I'll be seein' ya' once the track opens up again. Again, thanks for the race my friend.
On that race, I had a 1.80 60' on the Nitto's and ET'd 12.1 flat @ 114.57 mph. My next time out will be with MT street DR's and a 21mm Strano hollow rear bar .... trying to break into 11's seems near impossible for this car ... should be easy mid-11's, however, 'something just ain't gettin' me there'.
Dave, hope your Christmas was a Christmas shared with lots of family and friends. I'll be seein' ya' once the track opens up again. Again, thanks for the race my friend.