This might be a bad Idea, but.......
#301
so about this k-member of yours...is it strong? strong like the UMI k-member? strong enough for street and road race use?
...
can you jack on it? that's one of the reasons i stayed away from APS, i dont want to have to buy a lift to change a tire.
...
can you jack on it? that's one of the reasons i stayed away from APS, i dont want to have to buy a lift to change a tire.
Last edited by SS101; 02-18-2010 at 05:22 PM.
#306
Don't worry the K member will be just as strong as anything out there right now, we are not going to make an inferior product.
The K member is not an after thought when it comes to this kit, we have put just as much time and effort into making the K member as we have the kit itself.
Also the K member will be available at some point by itself for the DIY crowd. It will be one of the most room affording K members out there.
The K member is not an after thought when it comes to this kit, we have put just as much time and effort into making the K member as we have the kit itself.
Also the K member will be available at some point by itself for the DIY crowd. It will be one of the most room affording K members out there.
#308
would you rather have a guy that has terrible customer service and have a kit up already, or have a guy that has great customer service, and a good kit?
I can tell you personally, I have spent HOURS on the phone with Rob over the last couple months, and his kit will change everything.
I can tell you personally, I have spent HOURS on the phone with Rob over the last couple months, and his kit will change everything.
#316
TECH Fanatic
iTrader: (9)
Join Date: Apr 2008
Location: Tampa,Florida
Posts: 1,073
Likes: 0
Received 0 Likes
on
0 Posts
Our main concern is it's easy to have the jack slip and cause damage to the car or user, so if you are careful you will be fine