Track results, CAS Twin Turbo
#1
Banned
Thread Starter
iTrader: (2)
Join Date: Oct 2002
Location: Chicago
Posts: 404
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Four very consistent runs on BFG 315/35/17. Best pass was 11.6 at 128.9mph. Garbage 2.0 60ft. I was basically destroying the tires off my launch. My low trac was on all of 4th gear. I was ripping the tires the whole way down the track. Car felt great. This car is full weight and then some. Spare tire and coin holder, I left it as street trim. I have my shiftlight set for 5900 and it was going throught the traps at 6400. I will try Harlans 2 step again this time with the new heads. Maybe I can build more than 1 psi of boost? Overall, I had a blast
and am wowed by the almost 129mph trap.
Angelo
Mike, please get me off the benched list, I haven't been down for quite some time. Thank You
and am wowed by the almost 129mph trap.
![EEK !!](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_eek2.gif)
Mike, please get me off the benched list, I haven't been down for quite some time. Thank You
#3
Banned
Thread Starter
iTrader: (2)
Join Date: Oct 2002
Location: Chicago
Posts: 404
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Congrats. Impressive mph. Now get some ET Streets and lay down a serious number.
#5
Turbo Addict
iTrader: (3)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Nice mph... what rpm did you have the two-step set at? And how long did the car have to build boost before you launched?
also.. seeing such good numbers with that cam and a turbo makes me feel better about my TR for when i go boosted.... do you happen to have any before/after input with the stock cam/turbos and that cam/turbos?
Thanks
also.. seeing such good numbers with that cam and a turbo makes me feel better about my TR for when i go boosted.... do you happen to have any before/after input with the stock cam/turbos and that cam/turbos?
Thanks
#6
8 second mod
iTrader: (37)
Join Date: Nov 2002
Location: East Side Performance! mASShole
Posts: 17,879
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
GOOD MPH, TIRES my friend.
I got my 2-step in, but it was no good, Harlan is working on it now. That car has low low 10's all over it!!!!
I got my 2-step in, but it was no good, Harlan is working on it now. That car has low low 10's all over it!!!!
Trending Topics
#8
7 Second Club
iTrader: (5)
Join Date: Jan 2003
Location: Grove City Ohio/Port Washington L.I sometimes
Posts: 2,064
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Put a good tire on that car,powershift it down the track and you should see 10.4-10.5s with your mph.129mph is impressive for a street car.
#10
Banned
Thread Starter
iTrader: (2)
Join Date: Oct 2002
Location: Chicago
Posts: 404
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Nice mph... what rpm did you have the two-step set at? And how long did the car have to build boost before you launched?
also.. seeing such good numbers with that cam and a turbo makes me feel better about my TR for when i go boosted.... do you happen to have any before/after input with the stock cam/turbos and that cam/turbos?
Thanks
also.. seeing such good numbers with that cam and a turbo makes me feel better about my TR for when i go boosted.... do you happen to have any before/after input with the stock cam/turbos and that cam/turbos?
Thanks
![Bang Head](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_banghead.gif)
#14
TECH Enthusiast
Join Date: Nov 2001
Location: Toronto, Canada
Posts: 650
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Very nice run, your trap speed is higher than my car when it ran 10.9
, with a half decent hook you are easilly in the 10's
Keep up the good work
Paul
![Grin](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_grin.gif)
Keep up the good work
Paul