382 stroker for boost?
#1
On The Tree
Thread Starter
Join Date: Apr 2007
Location: germantown, maryland
Posts: 132
Likes: 0
Received 0 Likes
on
0 Posts
382 stroker for boost?
wondering who makes a 382 stroker with a cr for boost cause i cant find any, if tons of 382 kits for na apps. just none for boost.
#7
Any of the vendors will sell you a boost friendly 383 or you could always put 317s on a flat top piston motor.
I really dont see the issue here! Do a search!
2 mins http://www.texas-speed.com/shop/item...id=43&catid=86
Doug
I really dont see the issue here! Do a search!
2 mins http://www.texas-speed.com/shop/item...id=43&catid=86
Doug
Trending Topics
#9
TECH Addict
iTrader: (6)
Why not do an iron 370? Texas-speed and a lot of other vendors can build you a stout shortblock. As stated above compresison can be altered either by the CC of your heads (no milling), the dish of your pistons, or a combination of both. If its a budget build I say go forged 370 with 317 heads, decent FI cam, ls6 intake/ported stock TB, etc etc. What FI kit are you going with btw?
#12
On The Tree
Thread Starter
Join Date: Apr 2007
Location: germantown, maryland
Posts: 132
Likes: 0
Received 0 Likes
on
0 Posts
thanks for the input guys but i was looking for the rotating assembly for a 382 not a short block as i have and ls6 block ready
Last edited by pewter02z28gs; 12-15-2008 at 07:01 AM.
#13
Really! is your search button broke?
Less than 1 min http://www.texas-speed.com/shop/item...d=884&catid=88
1 more min http://www.sdpc2000.com/product/LS6R...gAssembly.aspx
Doug
Less than 1 min http://www.texas-speed.com/shop/item...d=884&catid=88
1 more min http://www.sdpc2000.com/product/LS6R...gAssembly.aspx
Doug
#14
On The Tree
Thread Starter
Join Date: Apr 2007
Location: germantown, maryland
Posts: 132
Likes: 0
Received 0 Likes
on
0 Posts
catfish i appericate the input but theres no need to be a dick about it, if you dont like the post then ignore it and go on your way, this forum is for everyone, not just for who u think should be on here, i was asking cause i searched and couldnt find what i was looking for, not the other way around.
Last edited by pewter02z28gs; 12-15-2008 at 07:10 AM.
#15
No need for name calling! I gave you the link to Texas speed earlier in this thread but you couldnt be bothered to look around on their site or any of the other 10 sponsors that sell rotating assemblies. You shouldn't get on here and say you searched when you so obviously did not! There are obviously 10+ sponsors to the right of this screen that sell 383 rotating assemblies.
Dont try to be self righteous w/ me to make yourself look better. All I did was answer your question to help YOU out. I don't post on here to benefit myself.
If you want people to take you seriously then you shouldn't slam the people who actually are trying to help you.
To quote you "this forum is for everyone, not just for who u think should be on here"
So who are you to tell me to go away.
Read the forum rules, Read the stickies, And do a search before you ask questions that have been answered many,many times.
Sorry for the rant.
I'm out of here.
Doug
Dont try to be self righteous w/ me to make yourself look better. All I did was answer your question to help YOU out. I don't post on here to benefit myself.
If you want people to take you seriously then you shouldn't slam the people who actually are trying to help you.
To quote you "this forum is for everyone, not just for who u think should be on here"
So who are you to tell me to go away.
Read the forum rules, Read the stickies, And do a search before you ask questions that have been answered many,many times.
Sorry for the rant.
I'm out of here.
Doug
#18
I would not use weber to build anything had a bad experience with a weber built 403 I bot from leo mlocki. It was a nightmare!!!