i need help deciding on my setup
i need help deciding on my setup i am planning on a 418 w/ twin 76's. i have been doing some reading on turbo selection and now i'm doubting my plan. any advice would be greatly appreciated.
well i was thinking with the 418 cubes i'd have no problem spooling and my flow would be high as well. am i wrong? i'm still learning this stuff. i appreciate the help.
Back pressure is bad, but that should not be an issue here.
What are your power goals and how do plan on using this ie street, strip?
How high do you want to revv it?
More specs on it.
What are your power goals and how do plan on using this ie street, strip?
How high do you want to revv it?
More specs on it.
Trending Topics
it will be mainly strip but a few weekend nights here and there destroying the Cobras! my power goal is right around 900 to 950 rwhp. i'd like to rev it to 7500 or so. L92's ported on top with a fast ported 92mm intake
Last edited by boostnificent; Mar 2, 2009 at 07:30 AM.
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Topdon ONE vs. Artidiag 800 BT2: Which is the Diagnostic Tablet For You?
Pouria Savadkouei
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
no one has any suggestions or comments? 
well is my turbo sizing ok for this setup? twin ITS 76mm Q-Trim .96 a/r T4 418ci w/ ported L92 heads and a ported 92mm FAST cam specs TBD. will they spool ok and be efficient?
Last edited by boostnificent; Mar 2, 2009 at 07:30 AM.