Can i get in the 10's with a cam????
#1
10 Second Club
Thread Starter
iTrader: (1)
Join Date: Jan 2008
Location: Leesville, LA
Posts: 23
Likes: 0
Received 0 Likes
on
0 Posts
Can i get in the 10's with a cam????
MADE A FEW PASSES AT THE LOCAL TRACK YESTERDAY. I WENT 11.55 @ 116 WITH A 1.57 60 FT. MY SPECS ARE IN MY SIG. MOTOR HAS STOCK INTERNALS. DO YOU GUYS THINK A CAM SWAP WILL GET ME IN THE 10'S?......(OH YEAH IT WAS 83 DEGREES OUT AND THERE WAS A 22 MPH HEADWIND)
#5
My brother's '95 Formula is on stock internals, and also has a P-1SC. His car ran a 10.914 @ 121.90 mph with a 1.452 sixty foot last year. That 22 mph head wind was definitely hurting you, how much boost are you running? You should be able to get into the 10's without a cam, a lot of it time can be gained by working on your 60 ft. Bob
#6
10 Second Club
Thread Starter
iTrader: (1)
Join Date: Jan 2008
Location: Leesville, LA
Posts: 23
Likes: 0
Received 0 Likes
on
0 Posts
Bob, that is good to hear. I am making 8 lbs of boost. I forgot to mention that my car is prettty fat at 3780 lbs. It is dead hooking off the line. I know I could shave some weight and do better but I still daily drive this car and am not ready to lose the ac and other accesories yet. Any suggestions??
Trending Topics
#11
Bob, that is good to hear. I am making 8 lbs of boost. I forgot to mention that my car is prettty fat at 3780 lbs. It is dead hooking off the line. I know I could shave some weight and do better but I still daily drive this car and am not ready to lose the ac and other accesories yet. Any suggestions??
#12
10 Second Club
Thread Starter
iTrader: (1)
Join Date: Jan 2008
Location: Leesville, LA
Posts: 23
Likes: 0
Received 0 Likes
on
0 Posts
Update after cam swap
I installed epp's blower cam and after some tuning, pulley swapping (making 10lbs) and fuel system improvements I finally got to the track....and the results were good. I ran a 10.98 @ 121 with a 1.52 60 ft...still 3780lbs