My 91mm turbo kit
05-04-2009, 10:59 AM
#42
TECH Resident
Join Date: Dec 2008
Posts: 995
Likes: 0
Received 0 Likes
on
0 Posts
Sorry if I offended the OP or Shearer. Never been my intention. Just pissed off with OFI.
To the top for a good kit and a top notch shop. Just got my concern answered by Ron.
"I hire people who take pride in their work and that is something he has never done"..Shearer
To the top for a good kit and a top notch shop. Just got my concern answered by Ron.
"I hire people who take pride in their work and that is something he has never done"..Shearer
05-15-2009, 10:31 PM
#51
I will try and get some more pictures up. I have been working on a custom coil relocation setup designed around the headers. There are some nice kits out there but I dont want long wires. I took the car last saturday to Shearers and we finished the exhaust. Also installed the window net on the cage and started the install on the anti roll bar. All of the hotparts are going to the coater on monday for the inside and out GOLD coating treatment. I modified the existing transmission braket to fit the ROSSLER powerglide.
I should have the weldon 2345 fuel pump next week. I went to summit tuesday and bought what should be most of the fittings I need to run the -10an feed line and -8an return. Bought aluminum tubing so I need to get the benders out soon.
I should have the weldon 2345 fuel pump next week. I went to summit tuesday and bought what should be most of the fittings I need to run the -10an feed line and -8an return. Bought aluminum tubing so I need to get the benders out soon.
05-17-2009, 08:18 AM
#55
Got one side of the coil relocation finished, after the other side is mounted I will measure and order the custom wires.
Finished installing my Wolfe anti roll bar and welded the seams where the parachute hooks up, around the roll cage mounting points and the mounting tabs for the anti roll bar.
Finished installing my Wolfe anti roll bar and welded the seams where the parachute hooks up, around the roll cage mounting points and the mounting tabs for the anti roll bar.
05-17-2009, 07:53 PM
#57
TECH Resident
iTrader: (6)
Join Date: Sep 2005
Location: Benson NC
Posts: 849
Likes: 0
Received 0 Likes
on
0 Posts
does any body build a just a hot side of the turbo....headers and downpipe? that is one of the best looking kits i have ever seen!!!!!!!!! i have a 88mm turbo on my truck set up and need just the hotside?
