My 91mm turbo kit
TECH Resident
Joined: Dec 2008
Posts: 995
Likes: 0
Sorry if I offended the OP or Shearer. Never been my intention. Just pissed off with OFI.
To the top for a good kit and a top notch shop. Just got my concern answered by Ron.
"I hire people who take pride in their work and that is something he has never done"..Shearer
To the top for a good kit and a top notch shop. Just got my concern answered by Ron.
"I hire people who take pride in their work and that is something he has never done"..Shearer
Thread Starter
8 Second Club
iTrader: (26)
Joined: Nov 2002
Posts: 2,644
Likes: 3
From: mansfield ohio
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
Thread Starter
8 Second Club
iTrader: (26)
Joined: Nov 2002
Posts: 2,644
Likes: 3
From: mansfield ohio
I will try and get some more pictures up. I have been working on a custom coil relocation setup designed around the headers. There are some nice kits out there but I dont want long wires. I took the car last saturday to Shearers and we finished the exhaust. Also installed the window net on the cage and started the install on the anti roll bar. All of the hotparts are going to the coater on monday for the inside and out GOLD coating treatment. I modified the existing transmission braket to fit the ROSSLER powerglide.
I should have the weldon 2345 fuel pump next week. I went to summit tuesday and bought what should be most of the fittings I need to run the -10an feed line and -8an return. Bought aluminum tubing so I need to get the benders out soon.
I should have the weldon 2345 fuel pump next week. I went to summit tuesday and bought what should be most of the fittings I need to run the -10an feed line and -8an return. Bought aluminum tubing so I need to get the benders out soon.
Thread Starter
8 Second Club
iTrader: (26)
Joined: Nov 2002
Posts: 2,644
Likes: 3
From: mansfield ohio
Got one side of the coil relocation finished, after the other side is mounted I will measure and order the custom wires.
Finished installing my Wolfe anti roll bar and welded the seams where the parachute hooks up, around the roll cage mounting points and the mounting tabs for the anti roll bar.
Finished installing my Wolfe anti roll bar and welded the seams where the parachute hooks up, around the roll cage mounting points and the mounting tabs for the anti roll bar.
does any body build a just a hot side of the turbo....headers and downpipe? that is one of the best looking kits i have ever seen!!!!!!!!! i have a 88mm turbo on my truck set up and need just the hotside?
