7 seconds...FINALLY!
#1
Thread Starter
7 Second Club
iTrader: (18)
Joined: Mar 2004
Posts: 790
Likes: 0
From: Cincinnati, Ohio
7 seconds...FINALLY!
First I have to thank all of those that have either helped or supported my bad habit, lol. My wife Kellie, family, friends (Ohio Boys and thier Crew) and of course my crew, (Jim, Ryan, Daniel, Bob) which have been a huge help considering the issues I fought this year with the new combo.
Lastly but equally important is Kurt Urban (Kurt Urban Performance). He took an idea I came up with at the LSX Shootout last year and made it work. He methodically thought thru the hurdles of a high HP hydraulic set-up. We wanted to make competitive power with high reliablilty (still field testing obviously, lol) with low maintenance. To recap, the most impressive part of the set-up is Harland Sharp rockers with a custom KUP girdle, cathedral port TEA 245 heads (Thanks Brian and Mike) covering up Fel-Pro MLS gasket with no o-rings. Very basic. Before we finished the build there were a few skeptics (as there should be) on the reliability and mechanical stability. Hell, I was even a little unsure of what we would be asking of this set-up.
Well after months of fighting with Trans and converter issues it finally came together at Milan Dragway last night. We managed a best 1/4 ET/MPH of 7.81 @ 186.7-on a 1.38 (60').
Here is a video of the pass...against a nitrous car in the semi's.
http://videos.streetfire.net/video/F...-7s_693777.htm
Equally impressive was the best 1/8 ET/MPH of 5.14 @ 152 that I coasted from 1000' out the backdoor to a 7.92 @ 163.
For those who are wondering, race weight was roughly 3360 for the night.
I'm glad to finally get that 7 second monkey off my back, now it's time to start squeezing this combo for a little more performance before the LSX shootout. I want to be at least respectfully competitive with the solid roller combo's.
Again, thanks to all that has supported the effort this season!
Mark
Lastly but equally important is Kurt Urban (Kurt Urban Performance). He took an idea I came up with at the LSX Shootout last year and made it work. He methodically thought thru the hurdles of a high HP hydraulic set-up. We wanted to make competitive power with high reliablilty (still field testing obviously, lol) with low maintenance. To recap, the most impressive part of the set-up is Harland Sharp rockers with a custom KUP girdle, cathedral port TEA 245 heads (Thanks Brian and Mike) covering up Fel-Pro MLS gasket with no o-rings. Very basic. Before we finished the build there were a few skeptics (as there should be) on the reliability and mechanical stability. Hell, I was even a little unsure of what we would be asking of this set-up.
Well after months of fighting with Trans and converter issues it finally came together at Milan Dragway last night. We managed a best 1/4 ET/MPH of 7.81 @ 186.7-on a 1.38 (60').
Here is a video of the pass...against a nitrous car in the semi's.
http://videos.streetfire.net/video/F...-7s_693777.htm
Equally impressive was the best 1/8 ET/MPH of 5.14 @ 152 that I coasted from 1000' out the backdoor to a 7.92 @ 163.
For those who are wondering, race weight was roughly 3360 for the night.
I'm glad to finally get that 7 second monkey off my back, now it's time to start squeezing this combo for a little more performance before the LSX shootout. I want to be at least respectfully competitive with the solid roller combo's.
Again, thanks to all that has supported the effort this season!
Mark
Last edited by BlwnTA; 07-05-2009 at 09:41 PM.
Trending Topics
#10
#15
Your car was impressive at Milan Friday, thanks . I think you need to tell the board you made three 7 second passes Mark. A good race car is one that runs consistent. You had a consistent car. What is it like to leave with money this month?
I think it kills the PA guy at Milan Michigan when he says. Here comes another Ohio Boys Car. Then you all run another 7 second pass.
We didn't make it to the pits this trip. We've been there each month beginning with the 1320X in May.
Good Job!
I think it kills the PA guy at Milan Michigan when he says. Here comes another Ohio Boys Car. Then you all run another 7 second pass.
We didn't make it to the pits this trip. We've been there each month beginning with the 1320X in May.
Good Job!