1BAD_LS1.....Budget 5.3 Truck manifold Turbo
#41
TECH Enthusiast
iTrader: (16)
Join Date: Jan 2005
Location: Nebraska
Posts: 637
Likes: 0
Received 0 Likes
on
0 Posts
Wiring them backwards might work but the pitch of the fan blade is what matters. If I wired my flex a lites backwords they would move air but not enough new blades and problem solved.
#43
Restricted User
Thread Starter
iTrader: (36)
Join Date: Sep 2008
Location: Alliance Nebraska
Posts: 1,268
Likes: 0
Received 0 Likes
on
0 Posts
RIMS AND TIRES CAM IN TODAY!!!!
My pitbull wanted to be in the picture.... I think he was jelous about all the attention the rims and tires were getting lol!
These should really help traction issues!!! and give it that badass drag car look!
My pitbull wanted to be in the picture.... I think he was jelous about all the attention the rims and tires were getting lol!
These should really help traction issues!!! and give it that badass drag car look!
#44
8 Second Club
iTrader: (43)
Join Date: May 2007
Location: texas
Posts: 988
Likes: 0
Received 0 Likes
on
0 Posts
ya, when i pulled my stock fans out i wired them backwards and they moved very little air. i couldnt see them moving enough air to keep it cool. your probably going to need some good pushers.
#46
Restricted User
Thread Starter
iTrader: (36)
Join Date: Sep 2008
Location: Alliance Nebraska
Posts: 1,268
Likes: 0
Received 0 Likes
on
0 Posts
I trimmed up the fan blade and tried everything and it just wont work without the blade being reversed also. and thats not really possible.... so im gonna have to buy a pusher fan.
What is the best BUDGET pusher fan????
Last edited by 1BAD_LS1; 09-16-2009 at 11:50 PM.
#47
Restricted User
Thread Starter
iTrader: (36)
Join Date: Sep 2008
Location: Alliance Nebraska
Posts: 1,268
Likes: 0
Received 0 Likes
on
0 Posts
Havent made a whole lot of progress lately been really busy at work... hope to get it done and ready to fire up this weekend!
Left to do:
Cold pipe
Down pipe (gonna drive it to the shop at work to do the downpipe lol)
Radiator hose's
Some wiring
TUNE IT
Left to do:
Cold pipe
Down pipe (gonna drive it to the shop at work to do the downpipe lol)
Radiator hose's
Some wiring
TUNE IT
#49
Restricted User
Thread Starter
iTrader: (36)
Join Date: Sep 2008
Location: Alliance Nebraska
Posts: 1,268
Likes: 0
Received 0 Likes
on
0 Posts
thanks.... ya i thought about that! My username also! LMAO....
I think ill just leave them for now.... i have other things to spend the money on besided new custom plates, depending on how the motor holds up and what it puts down i might change it eventually.
I think ill just leave them for now.... i have other things to spend the money on besided new custom plates, depending on how the motor holds up and what it puts down i might change it eventually.
#51
Restricted User
Thread Starter
iTrader: (36)
Join Date: Sep 2008
Location: Alliance Nebraska
Posts: 1,268
Likes: 0
Received 0 Likes
on
0 Posts
well i got the cold pipe mocked up tonight... thats about it (no pics though, it was dark)..
I am hoping i can get it 98% done this weekend so i can start tuning on it... things always seem to come up! lol
I am hoping i can get it 98% done this weekend so i can start tuning on it... things always seem to come up! lol
#55
Restricted User
Thread Starter
iTrader: (36)
Join Date: Sep 2008
Location: Alliance Nebraska
Posts: 1,268
Likes: 0
Received 0 Likes
on
0 Posts
Got all the cold pipe done, mounted the trans cooler, got the dual catch cans setup, oil lines for turbo ran, radiator and fans mounted, all wiring done, boost guage installed, ect... ITS ALIVE AGAIN!
all i have left is to bleed the brake lines, 2nd walbro, 3 point SFC's, lca brackets, Downpipe, and tuning....
AND 1 problem to figure out! ---> I reversed the wires for the fans to run them backwards well they wont turn on! The car got way past the 160* turn on temp! I checked the DTC's with the scanner and it comes up with fan relay failure! WTF, reversing the wires shouldn't cause them to not work. i dont think...
I will get pictures up later!
all i have left is to bleed the brake lines, 2nd walbro, 3 point SFC's, lca brackets, Downpipe, and tuning....
AND 1 problem to figure out! ---> I reversed the wires for the fans to run them backwards well they wont turn on! The car got way past the 160* turn on temp! I checked the DTC's with the scanner and it comes up with fan relay failure! WTF, reversing the wires shouldn't cause them to not work. i dont think...
I will get pictures up later!
#56
TECH Senior Member
iTrader: (24)
MightyMouse
https://ls1tech.com/forums/tools-fab...ml#post5790207
Reject
https://ls1tech.com/forums/6511747-post179.html
your not alone
https://ls1tech.com/forums/tools-fab...ml#post5790207
Reject
https://ls1tech.com/forums/6511747-post179.html
your not alone
#57
Restricted User
Thread Starter
iTrader: (36)
Join Date: Sep 2008
Location: Alliance Nebraska
Posts: 1,268
Likes: 0
Received 0 Likes
on
0 Posts
didn't get pictures taken... got the fan problem figured out though.
After checking everything over and deciding to take it for an EASY (no boost) to the gas station well i get a block away to a stop sight and look in the mirrorand had a small trail for about 15ft!!!!!!! it was oil!!! the damn timing cover seal is leaking!!
So I have to tear the damn thing down again! This really pissed me off tonight! I just wanna sell it now, lmao....
I will get pictures sometime im just so pissed that i can look at it right now!
After checking everything over and deciding to take it for an EASY (no boost) to the gas station well i get a block away to a stop sight and look in the mirrorand had a small trail for about 15ft!!!!!!! it was oil!!! the damn timing cover seal is leaking!!
So I have to tear the damn thing down again! This really pissed me off tonight! I just wanna sell it now, lmao....
I will get pictures sometime im just so pissed that i can look at it right now!