View Poll Results: Power Poll (Sig Motor) 10psi, 93oct.
470-480
0
0%
480-490
0
0%
Voters: 13. You may not vote on this poll
Time for my Front mount!
#43
TECH Enthusiast
Thread Starter
iTrader: (9)
Join Date: Oct 2005
Location: Greenville, Raleigh NC
Posts: 702
Likes: 0
Received 0 Likes
on
0 Posts
Just want to bump this one more time before I start a new thread about it, but what have people done for power steering lines, those that have changed them, how did you make new ones and what did you use?
I do have good news I tried to start the car for the first time this weekend, and it cranked right up, so maybe no serious damage to the wiring harness, idk if the coolant temp sensor wiring is fried or not cus I didn't have the laptop hooked up to look at the temps and it started smoking from the leftover PS fluid on the header wrap so I shut it down being I still haven't got a fire extinguisher yet.
and I swear I have the pics on my computer with the clearance and everything I just keep forgetting to post them .. maybe tonight.
I do have good news I tried to start the car for the first time this weekend, and it cranked right up, so maybe no serious damage to the wiring harness, idk if the coolant temp sensor wiring is fried or not cus I didn't have the laptop hooked up to look at the temps and it started smoking from the leftover PS fluid on the header wrap so I shut it down being I still haven't got a fire extinguisher yet.
and I swear I have the pics on my computer with the clearance and everything I just keep forgetting to post them .. maybe tonight.
#44
TECH Fanatic
iTrader: (1)
Join Date: Jan 2003
Location: Sarasota, FL
Posts: 1,476
Likes: 0
Received 0 Likes
on
0 Posts
The parts list for braided power steering lines is in this thread...
https://ls1tech.com/forums/forced-in...t-up-faqs.html
There's an old thread, by Brains I believe, floating around with a kickass how-to for them but I don't have a link to it saved on this computer, maybe someone can step in and post it.
Bummer about the flaming PS fluid though, glad it didn't do any serious damage.
https://ls1tech.com/forums/forced-in...t-up-faqs.html
There's an old thread, by Brains I believe, floating around with a kickass how-to for them but I don't have a link to it saved on this computer, maybe someone can step in and post it.
Bummer about the flaming PS fluid though, glad it didn't do any serious damage.
#48
TECH Enthusiast
Thread Starter
iTrader: (9)
Join Date: Oct 2005
Location: Greenville, Raleigh NC
Posts: 702
Likes: 0
Received 0 Likes
on
0 Posts
I posted this in the general repair forum as well, but I need some help finding the Power steering hose that I melted. No parts stores seem to have a listing for it. It is not the pressurized feed line but the return line that goes from the PS rack to the cooler in the upper radiator hose. I will attach a diagram to show the hose I mean.
#51
TECH Enthusiast
iTrader: (4)
Join Date: May 2006
Location: Metro Detroit
Posts: 589
Likes: 0
Received 0 Likes
on
0 Posts
for the non pressure return side, just cut out the bad section and splice in a new section of regular rubber hose with clamps and couplers. I dont even run the cooler on my mustang swap
#53
TECH Enthusiast
Thread Starter
iTrader: (9)
Join Date: Oct 2005
Location: Greenville, Raleigh NC
Posts: 702
Likes: 0
Received 0 Likes
on
0 Posts
Updates: (This thread keeps dragging doesnt it) I did a full system check on the car with HPTuners, all my sensors seem to be reading and the melted wires apparently go to things im not using so .. ohh well.
I have an apt to get the exhaust ran this friday, hoping we can work something out to gain some clearance under the k-member and not add much back pressure, its pretty quiet now so im going no muffler for the time being just out the factory CME tips.
From there i hope to drive to the tuner and schedule an appointment. So with any luck Ill have some numbers and a driveable car around the first of next month .. I will keep this updated as things come up.
I have an apt to get the exhaust ran this friday, hoping we can work something out to gain some clearance under the k-member and not add much back pressure, its pretty quiet now so im going no muffler for the time being just out the factory CME tips.
From there i hope to drive to the tuner and schedule an appointment. So with any luck Ill have some numbers and a driveable car around the first of next month .. I will keep this updated as things come up.
#56
TECH Enthusiast
Thread Starter
iTrader: (9)
Join Date: Oct 2005
Location: Greenville, Raleigh NC
Posts: 702
Likes: 0
Received 0 Likes
on
0 Posts
So, I got the exhaust ran, im I very happy with the way it turned out and the sound (no cats, no muffler, still out the CME tips) but now I know for sure I have some form or oiling problem, I was driving the car home and noticed when I shift right after a little acceleration I get a puff of blue smoke out the exhaust, only for a sec and only right after I let off the gas.
I dont think its the motor just cus it doesn't seem to smoke at all while im on the gas only when it spools the turbo some (I havent been full throttle yet, maybe 4psi) and I let off to shift. Seems like I have seen this problem on the forums before being something with the turbo and oil pump or oil return but cant remember..
Any ideas? Ohh and I have an apt to tune on March 6th presuming I get all of this worked out.
I dont think its the motor just cus it doesn't seem to smoke at all while im on the gas only when it spools the turbo some (I havent been full throttle yet, maybe 4psi) and I let off to shift. Seems like I have seen this problem on the forums before being something with the turbo and oil pump or oil return but cant remember..
Any ideas? Ohh and I have an apt to tune on March 6th presuming I get all of this worked out.