Need help picking a BOV for APS car
#23
Banned
iTrader: (9)
Join Date: Nov 2006
Location: Iowa
Posts: 1,990
Likes: 0
Received 0 Likes
on
0 Posts
https://ls1tech.com/forums/forced-in...nline-bov.html
^^^ but this is another choose for the SD guys
^^^ but this is another choose for the SD guys
#29
9 Second Club
Thread Starter
iTrader: (20)
Join Date: Sep 2007
Location: Saline, MI
Posts: 1,813
Likes: 0
Received 0 Likes
on
0 Posts
i am going to run a synapse setup. already got them ordered.
after seeing this on youtube. hard to go different way.
after seeing this on youtube. hard to go different way.
it looks like he does make some good BOV but i want so,ething for the top of the engine and i think his BOV are kind of big. but im planing to go down there and se what hes got
side note dude with the vette he live down here by me i try to get a race out of him he was not having it. LOL
#33
10 Second Club
iTrader: (12)
Join Date: Jan 2005
Location: Humble
Posts: 288
Likes: 0
Received 0 Likes
on
0 Posts
I have tial 50 on my 97 talon .Its top quality not that loud I don't think.
I put twin turbosmart supersonics directly in place of the aps blow offs. They are much louder and better sounding and are not recirced.They are pricey though.
I like both Tial and turbosmart both top quality. Can't really go wrong with either one.
I put twin turbosmart supersonics directly in place of the aps blow offs. They are much louder and better sounding and are not recirced.They are pricey though.
I like both Tial and turbosmart both top quality. Can't really go wrong with either one.
Which supersonics did you get and where? Did you notice any difference other than the sound?
#34
TECH Veteran
iTrader: (3)
I got them off ebay that was a while ago forget where. They were the turbosmart Kompact series unrecirced style. they are plug and play into my aps kit.
Noticed anything..well they are louder .I was running the aps bosch unrecirced also.
Its possible the aps leak at higher boost that might account for the one dyno of the synergy getting high numbers on dyno. There is zero other reason for one blow off to make more power than another one unless they are leaking under boost.
This problem happens with the talons..the 2nd gen stock blow off can't hold much past 10psi. the 1st gen can hold around 17psi and guys crush it to get it to hold more.
But most switch to quality aftermarket when running the big boost like 35psi.
Turbosmart also has the megasonic but its not in the kompact plug and play style.My supersonics are like 250 each.I might even get some turbosmart 38 gates they might fit better with the 4l80 swap. Its very tight in there with tials from the pics i have seen.
Turbosmart supersonic also adjust with no extra springs just simple dial. My tial you have to play with springs a bit still simple really.
I really do have to take some video of my car maybe in a few weeks since its down right now for the auto swap. Course you won't be hearing the blow offs near as much with the auto but such is life.
Noticed anything..well they are louder .I was running the aps bosch unrecirced also.
Its possible the aps leak at higher boost that might account for the one dyno of the synergy getting high numbers on dyno. There is zero other reason for one blow off to make more power than another one unless they are leaking under boost.
This problem happens with the talons..the 2nd gen stock blow off can't hold much past 10psi. the 1st gen can hold around 17psi and guys crush it to get it to hold more.
But most switch to quality aftermarket when running the big boost like 35psi.
Turbosmart also has the megasonic but its not in the kompact plug and play style.My supersonics are like 250 each.I might even get some turbosmart 38 gates they might fit better with the 4l80 swap. Its very tight in there with tials from the pics i have seen.
Turbosmart supersonic also adjust with no extra springs just simple dial. My tial you have to play with springs a bit still simple really.
I really do have to take some video of my car maybe in a few weeks since its down right now for the auto swap. Course you won't be hearing the blow offs near as much with the auto but such is life.
#35
10 Second Club
iTrader: (12)
Join Date: Jan 2005
Location: Humble
Posts: 288
Likes: 0
Received 0 Likes
on
0 Posts
I got them off ebay that was a while ago forget where. They were the turbosmart Kompact series unrecirced style. they are plug and play into my aps kit.
Noticed anything..well they are louder .I was running the aps bosch unrecirced also.
Its possible the aps leak at higher boost that might account for the one dyno of the synergy getting high numbers on dyno. There is zero other reason for one blow off to make more power than another one unless they are leaking under boost.
This problem happens with the talons..the 2nd gen stock blow off can't hold much past 10psi. the 1st gen can hold around 17psi and guys crush it to get it to hold more.
But most switch to quality aftermarket when running the big boost like 35psi.
Turbosmart also has the megasonic but its not in the kompact plug and play style.My supersonics are like 250 each.I might even get some turbosmart 38 gates they might fit better with the 4l80 swap. Its very tight in there with tials from the pics i have seen.
Turbosmart supersonic also adjust with no extra springs just simple dial. My tial you have to play with springs a bit still simple really.
I really do have to take some video of my car maybe in a few weeks since its down right now for the auto swap. Course you won't be hearing the blow offs near as much with the auto but such is life.
Noticed anything..well they are louder .I was running the aps bosch unrecirced also.
Its possible the aps leak at higher boost that might account for the one dyno of the synergy getting high numbers on dyno. There is zero other reason for one blow off to make more power than another one unless they are leaking under boost.
This problem happens with the talons..the 2nd gen stock blow off can't hold much past 10psi. the 1st gen can hold around 17psi and guys crush it to get it to hold more.
But most switch to quality aftermarket when running the big boost like 35psi.
Turbosmart also has the megasonic but its not in the kompact plug and play style.My supersonics are like 250 each.I might even get some turbosmart 38 gates they might fit better with the 4l80 swap. Its very tight in there with tials from the pics i have seen.
Turbosmart supersonic also adjust with no extra springs just simple dial. My tial you have to play with springs a bit still simple really.
I really do have to take some video of my car maybe in a few weeks since its down right now for the auto swap. Course you won't be hearing the blow offs near as much with the auto but such is life.
What did you block off the inlet tube hole with?
#37
#38
TECH Veteran
iTrader: (3)
I got block off plugs from home depot. They are for table leg protection. They fit perfect.
Rercic has nothing to do with any lag. And our cars are blow thru maf so venting not recircing is not needed. Recircing is only done for reasons of quietness . On my talon car can run a bit rich and stuff if you run non recirced since its blow thru maf.
Rercic has nothing to do with any lag. And our cars are blow thru maf so venting not recircing is not needed. Recircing is only done for reasons of quietness . On my talon car can run a bit rich and stuff if you run non recirced since its blow thru maf.