Fireball Outlaw Drag Radial Rebuild Thread
#1
TECH Senior Member
Thread Starter
iTrader: (21)
Join Date: Nov 2001
Location: Cecil County Raceway!!!
Posts: 8,484
Likes: 0
Received 0 Likes
on
0 Posts
Fireball Outlaw Drag Radial Rebuild Thread
Decided to 100% change the setup...old setup details are here:
https://ls1tech.com/forums/forced-in...rbo-build.html
Sold the minicube A2W intercooler
Sold the FI-98X turbo
All turbo plumbing is going to change
Turbo will be a Precision 106mm
Will be updating the chassis to SFI 25.3 specification
Will be adding dual parachutes
So far...
Picked up a 2400hp intercooler
I have a mockup precision thumper on order from Shawn. Shawn is also working on the new bullet...a 388ci LS2
mocked up a potential layout with my 98mm...only difference is that I plan on placing the turbo behind the passenger side foglight hole and mount the I/C inside the car...I'll update this as I progress...
https://ls1tech.com/forums/forced-in...rbo-build.html
Sold the minicube A2W intercooler
Sold the FI-98X turbo
All turbo plumbing is going to change
Turbo will be a Precision 106mm
Will be updating the chassis to SFI 25.3 specification
Will be adding dual parachutes
So far...
Picked up a 2400hp intercooler
I have a mockup precision thumper on order from Shawn. Shawn is also working on the new bullet...a 388ci LS2
mocked up a potential layout with my 98mm...only difference is that I plan on placing the turbo behind the passenger side foglight hole and mount the I/C inside the car...I'll update this as I progress...
Last edited by Fireball; 08-20-2010 at 12:34 PM.