Like everyone else said, HKS is going to be the best for flow and no restriction, all the supra guys use them for high horsepower.

 

Their pretty proud of that thing @ $130 a pop.

 

Nextime your close snap a few from the underside like from the balancer area if you can. Its very nice.

 

Looking good Carlos!

What cooling fans are you planning on running?

 

Great seeing this south florida builds... way to many imports running around thinking they have the scene on lock.

cya around!

Oh, nasty build... should run hard. If you was already running low 160's and if this build will allow him to make it higher into the higher 160mph range, then this could be one of the quickest cars local that I know of that isn't a dedicated track car. That silly adturbo 2jz powered S2000 is in the 163mph range.... and he is also on a glide.

 

He's running the Flex-a-lite 240's I think. They are pusher with an "S" blade.

 

He is also blown up alot and not nearly as consistant. Hard to get that short wheelbase down the track.

We are shooting a bit higher than 170 mph with this build.

 

What bypass valve is that in the picture?

 

Right, you would think since it's the indestructible 2jz that he wouldn't run into any problems but I know of when it has.

Sounds great! If you could, keep my updates, I'll head up there and see it in person or when ya'll finally hit PBIR.

A.

 

Awesome build you have there! Bob

 

Sick build..Cant wait to see it in the track...
LOS quick question do you know who has a LS2 trottle body need one...THANXX

 

is the LS2 and truck throttle bodies the same? you need a throttle by wire?

if so I have one...

Chad

 

JGS

We were hoping to atleast drive it by tomorrow but that's not looking realistic. I will likely be out there tomorrow night with my car. Supposed to be the best air yet this season.

Negative. All of our cars in this area are Fbodies. Nothing that came stock with an LS2.
Yeah, pretty sure they are Fly-by-wire and 90mm.

 

Sick built! That is gonna be a nasty "street car".

 

some new pics

 

You guys are building that think fasssssst....Nice and clean also....It looks fast standing still..Good luck

 

If you don't mind me asking, what's the cost of that intake? It's NICE!

 

Where did you end up getting the air filters from? looks good btw

 

New they are over $3K. BonnarLS1 found one being sold on eBay. Steve snagged it for a cool $1500 which is exactly what he got for the FiberTuned intake with the NitroDave DP nitrous kit on it. Worked out perfect. The intake is like brand new.

Discount Auto. They are pretty small so they will only be used for street cruising.

He ran into a problem last night with the 3 bar MAP sensor. The connector on the MSD 3 BAR MAP is an older style weather pack type connector and the BS3 harness has the newer GM type plug. Bonnar came thru today with one and a bunch of the local guys ended up having one of them laying around as well had that not panned out. We got a pretty big crew in this area that we race with. It is a great support system.

Should have her fired up before the end of the weekend if all goes well.

 

is there any way to run two pipes down from the turbo inlets ?

i just think thoso turbos will be sucking up allot of warm air that will be fed threw the rad.