Dissapointed day at the Dyno
#41
12 Second Club
iTrader: (116)
I know about the firehose to fill the shotglass theory, as always guys seem so big and bad on the phone and behind the computer but in person its a differant story. Nick is the best tuner in the bay area period. I visited many shops. Goodies in San Jose is also top notch tuner
I find it highly comical.
#42
TECH Resident
Thread Starter
iTrader: (4)
Join Date: Jun 2007
Posts: 844
Likes: 0
Received 0 Likes
on
0 Posts
Whats a good brand injector, I didnt really like the bosch green tops. Also why would the tr6 plug be better?
I have a boost and fuel pressure gauge to install. Fast 92 intake and throttle(waiting on summit). Hotwire kit and debating to use the my msd boost pump or not?
I want to re-tune by this weekend
I have a boost and fuel pressure gauge to install. Fast 92 intake and throttle(waiting on summit). Hotwire kit and debating to use the my msd boost pump or not?
I want to re-tune by this weekend
#43
TECH Resident
Thread Starter
iTrader: (4)
Join Date: Jun 2007
Posts: 844
Likes: 0
Received 0 Likes
on
0 Posts
Title reads Dissapointed in dyno, Just wanted to show my car off, so what your point. Yes, I dont get along with the other tuner(waste of $$$$$$). Yes norcal owner what his face is best buddies with him. Did he take my money yes, did he help me with what im trying to do no.
Back to the car. I ran out of injector not pump(GSS340). I want to at least add the hotwire. I dont know the much just ask some of the good shops who help me(hours on the phone)
Lonnies Performance
Exotic Performance Plus
Procharger
Fuel Injector connection in georgia
gmpartdirect and Hilltop Buick
craigslist, ebay and the recession
LSX Dave and LS7 Chris
Newtech
cant forgot ls1tech
Back to the car. I ran out of injector not pump(GSS340). I want to at least add the hotwire. I dont know the much just ask some of the good shops who help me(hours on the phone)
Lonnies Performance
Exotic Performance Plus
Procharger
Fuel Injector connection in georgia
gmpartdirect and Hilltop Buick
craigslist, ebay and the recession
LSX Dave and LS7 Chris
Newtech
cant forgot ls1tech
Last edited by pdasterly; 01-07-2010 at 01:44 PM.
#44
12 Second Club
iTrader: (116)
Here is a recent thread about a sponsor offering flow matched injectors. I believe he has the LS1 style 60's, you might have to PM him.
https://ls1tech.com/forums/fueling-i...w-matched.html
I would do some searching on the double in-tank Walbro set-up & stop messing around. Its IMO the best route to go & will allow you to grow in the future with the combo. There are several threads covering this very topic. Alter the fuel system to a return system, grab some aftermarket rails, 60# injectors & adjustable FPR. That will support alot more HP than that P1 will ever make. Then you'll never have to worry about the fuel system not keeping up. At worst you'll have to step up the injector later as the combo grows & replace the pumps in the tank as general maintance when its time.
https://ls1tech.com/forums/fueling-i...w-matched.html
I would do some searching on the double in-tank Walbro set-up & stop messing around. Its IMO the best route to go & will allow you to grow in the future with the combo. There are several threads covering this very topic. Alter the fuel system to a return system, grab some aftermarket rails, 60# injectors & adjustable FPR. That will support alot more HP than that P1 will ever make. Then you'll never have to worry about the fuel system not keeping up. At worst you'll have to step up the injector later as the combo grows & replace the pumps in the tank as general maintance when its time.
#46
TECH Resident
Thread Starter
iTrader: (4)
Join Date: Jun 2007
Posts: 844
Likes: 0
Received 0 Likes
on
0 Posts
P1 is temporary, i originally bought two gss340 for a dual setup but took it apart and used just one. i guess i could reassemble and I have a hobbs switch to activate it. Also im trying to not go overboard like i did with the camaro. I want this car to be reliable and not break down all the time.
#52
TECH Enthusiast
iTrader: (4)
Join Date: May 2006
Location: Metro Detroit
Posts: 589
Likes: 0
Received 0 Likes
on
0 Posts
id run the 80s, only for the simple fact that theyll idle just as good with a tuner who knows what hes doing, but youll be able to spray e85 thru them also, which the 60s wouldnt give you enough flow for
Assuming youve got enough fuel pump obviously
Assuming youve got enough fuel pump obviously
#55
My car made close to 650rwhp on two pumps, stock lines and rails, 60lb injectors and a hotwire kit. Didn't have any problems out of it and that was with a stock bottem end ls1 with a 224 cam and a D1
#57
TECH Addict
iTrader: (9)
I dont think his tuner is uneducated but 80# are alittle extreme for his set up. I understand he already has them but he can sell them quick and go with the 60# easy. But its his ride people on this sight can only ad opinions and suggestions lol. What great about this sight is vendors have customers with their work on here, and good or bad its posted take that for what its worth.
#59
11 Second Club
iTrader: (19)
I don't know as much as alot of these guys on here, but, (I'll take a shot at it) IMO, that seems about right, (although I do not know the specs on the cam). You can't be making that much boost with your blower pulley setup when combined with those pistons and cam. I made 480 rwhp (M6) with the same pulley on a stock bottom end w/ TFS heads at 7#. 42#ers and a Racetronix kit was adequite for me but maybe not in your situation. If I do anymore I obviously have to go to a bigger fuel system.
Your stalled auto has also got to be cutting back a little on your peak #'s too.
Your stalled auto has also got to be cutting back a little on your peak #'s too.