Which is the best meth injection system
#23
On The Tree
Thread Starter
exactly just pushing some limits in the process it's a small turbo though so i'll probably only see 500whp even with that much boost.
#25
10 Second Club
iTrader: (64)
Ok well that is the wrong way of thinking things threw. I don't care what size the turbo is IF you see 13psi-15 psi it will be the same as my motor seeing 13-15 psi with my Prochager and you would be in the 650-750rwhp range.
If your turbo is that small well then it will likely run out of steam before you every get that much boost.
Also the Alky control kit is in the $550 area call and ask because you can order it with or with out a 2 bar MAP sensor based on your existing setup
#28
On The Tree
Thread Starter
clearly i'm seeing a lot of suggestions leaning towards alkycontrol but it why? good customer service seems to be the only reason. i want to see features and what exactly makes them the best. i'm also seeing that aem is using a recirculation style pump that give a constant flow instead of a pulsating flow
Last edited by nasty_ss; 02-10-2010 at 03:55 AM.
#29
FormerVendor
iTrader: (45)
Alkycontrol! here's the why:
-All braided lines (no plastic lines with stab-in cheap fittings like many kits)
-FULLY adjustable from turn on point, turn on volume, and ramp rate
-Truly progressive; they use a real GM 2 or 3 bar MAP sensor
-Can run 100% methanol without pump failure (unlike other brands with pumps that have internals that are not suited to 100% meth 100% of the time). He takes the pumps apart and replaces EVERY pasrt that is sensitive to methanol. The others don't do that.
-has low-level warning light
-has 2stage LED to show pump activation and green to let you know the line spraying is up to pressure
-F-body kit comes with custom washer tank with all electronics and sender for the tank pre-mounted, so you don't have to mod your own or worry about leaks
-Julio is ALWAYS available to help if you run into issues and he will stay on the phone with you and walk you through troubleshooting if you are in a serious bind
Couple that with the fact that I have seen his kits installed from 05-06 on cars that I tuned, some very regular drivers, that still have their kits operating at the same level without maintenance or incident.
There are no prices because the F-bod kits have a ton of options from nozzle size to nozzle count to tank setup to MAP sensor, etc. For as much boost as you are talking about, I would suggest a dual nozzle arrangement with two #10 nozzels or possible a #10 and #15.
-All braided lines (no plastic lines with stab-in cheap fittings like many kits)
-FULLY adjustable from turn on point, turn on volume, and ramp rate
-Truly progressive; they use a real GM 2 or 3 bar MAP sensor
-Can run 100% methanol without pump failure (unlike other brands with pumps that have internals that are not suited to 100% meth 100% of the time). He takes the pumps apart and replaces EVERY pasrt that is sensitive to methanol. The others don't do that.
-has low-level warning light
-has 2stage LED to show pump activation and green to let you know the line spraying is up to pressure
-F-body kit comes with custom washer tank with all electronics and sender for the tank pre-mounted, so you don't have to mod your own or worry about leaks
-Julio is ALWAYS available to help if you run into issues and he will stay on the phone with you and walk you through troubleshooting if you are in a serious bind
Couple that with the fact that I have seen his kits installed from 05-06 on cars that I tuned, some very regular drivers, that still have their kits operating at the same level without maintenance or incident.
There are no prices because the F-bod kits have a ton of options from nozzle size to nozzle count to tank setup to MAP sensor, etc. For as much boost as you are talking about, I would suggest a dual nozzle arrangement with two #10 nozzels or possible a #10 and #15.
#33
12 Second Club
iTrader: (116)
Alkycontrol! here's the why:
-All braided lines (no plastic lines with stab-in cheap fittings like many kits)
-FULLY adjustable from turn on point, turn on volume, and ramp rate
-Truly progressive; they use a real GM 2 or 3 bar MAP sensor
-Can run 100% methanol without pump failure (unlike other brands with pumps that have internals that are not suited to 100% meth 100% of the time). He takes the pumps apart and replaces EVERY pasrt that is sensitive to methanol. The others don't do that.
-has low-level warning light
-has 2stage LED to show pump activation and green to let you know the line spraying is up to pressure
-F-body kit comes with custom washer tank with all electronics and sender for the tank pre-mounted, so you don't have to mod your own or worry about leaks
-Julio is ALWAYS available to help if you run into issues and he will stay on the phone with you and walk you through troubleshooting if you are in a serious bind
Couple that with the fact that I have seen his kits installed from 05-06 on cars that I tuned, some very regular drivers, that still have their kits operating at the same level without maintenance or incident.
There are no prices because the F-bod kits have a ton of options from nozzle size to nozzle count to tank setup to MAP sensor, etc. For as much boost as you are talking about, I would suggest a dual nozzle arrangement with two #10 nozzels or possible a #10 and #15.
-All braided lines (no plastic lines with stab-in cheap fittings like many kits)
-FULLY adjustable from turn on point, turn on volume, and ramp rate
-Truly progressive; they use a real GM 2 or 3 bar MAP sensor
-Can run 100% methanol without pump failure (unlike other brands with pumps that have internals that are not suited to 100% meth 100% of the time). He takes the pumps apart and replaces EVERY pasrt that is sensitive to methanol. The others don't do that.
-has low-level warning light
-has 2stage LED to show pump activation and green to let you know the line spraying is up to pressure
-F-body kit comes with custom washer tank with all electronics and sender for the tank pre-mounted, so you don't have to mod your own or worry about leaks
-Julio is ALWAYS available to help if you run into issues and he will stay on the phone with you and walk you through troubleshooting if you are in a serious bind
Couple that with the fact that I have seen his kits installed from 05-06 on cars that I tuned, some very regular drivers, that still have their kits operating at the same level without maintenance or incident.
There are no prices because the F-bod kits have a ton of options from nozzle size to nozzle count to tank setup to MAP sensor, etc. For as much boost as you are talking about, I would suggest a dual nozzle arrangement with two #10 nozzels or possible a #10 and #15.
#34
On The Tree
Thread Starter
Alkycontrol! here's the why:
-All braided lines (no plastic lines with stab-in cheap fittings like many kits)
-FULLY adjustable from turn on point, turn on volume, and ramp rate
-Truly progressive; they use a real GM 2 or 3 bar MAP sensor
-Can run 100% methanol without pump failure (unlike other brands with pumps that have internals that are not suited to 100% meth 100% of the time). He takes the pumps apart and replaces EVERY pasrt that is sensitive to methanol. The others don't do that.
-has low-level warning light
-has 2stage LED to show pump activation and green to let you know the line spraying is up to pressure
-F-body kit comes with custom washer tank with all electronics and sender for the tank pre-mounted, so you don't have to mod your own or worry about leaks
-Julio is ALWAYS available to help if you run into issues and he will stay on the phone with you and walk you through troubleshooting if you are in a serious bind
Couple that with the fact that I have seen his kits installed from 05-06 on cars that I tuned, some very regular drivers, that still have their kits operating at the same level without maintenance or incident.
There are no prices because the F-bod kits have a ton of options from nozzle size to nozzle count to tank setup to MAP sensor, etc. For as much boost as you are talking about, I would suggest a dual nozzle arrangement with two #10 nozzels or possible a #10 and #15.
-All braided lines (no plastic lines with stab-in cheap fittings like many kits)
-FULLY adjustable from turn on point, turn on volume, and ramp rate
-Truly progressive; they use a real GM 2 or 3 bar MAP sensor
-Can run 100% methanol without pump failure (unlike other brands with pumps that have internals that are not suited to 100% meth 100% of the time). He takes the pumps apart and replaces EVERY pasrt that is sensitive to methanol. The others don't do that.
-has low-level warning light
-has 2stage LED to show pump activation and green to let you know the line spraying is up to pressure
-F-body kit comes with custom washer tank with all electronics and sender for the tank pre-mounted, so you don't have to mod your own or worry about leaks
-Julio is ALWAYS available to help if you run into issues and he will stay on the phone with you and walk you through troubleshooting if you are in a serious bind
Couple that with the fact that I have seen his kits installed from 05-06 on cars that I tuned, some very regular drivers, that still have their kits operating at the same level without maintenance or incident.
There are no prices because the F-bod kits have a ton of options from nozzle size to nozzle count to tank setup to MAP sensor, etc. For as much boost as you are talking about, I would suggest a dual nozzle arrangement with two #10 nozzels or possible a #10 and #15.