Lsx Tall Deck Street Build
#21
Teching In
Thread Starter
iTrader: (2)
Join Date: Oct 2004
Location: texas
Posts: 19
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
The motor end up with a 4.150 bore and a 4.250 stroke... This is going in my 98 ram air, on a side note I picked up the direct port fogged kit and will be pluming it this weekend
... I'm looking to find the best cam, iv talked to a few buliders but it's not set in stone yet any ideals ? The car is going to be soild roller of course.
![Driving](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_driving3.gif)
#25
Teching In
Join Date: May 2009
Location: East Coast of Florida
Posts: 34
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
OK guys got the short block back from the machine shop today with the Callie's crank, Oliver billet rods, custom diamond -40.00cc dish pistons. Finally getting time to start working on the car. I'm scraping the 4L80 Ideal as I don't see it lasting very long. Since I snapped the 300M billet input shaft on the turbo camaro last weekend on the street.I'm looking into a lenco since I want to keep this a street car.
![Nod](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_nod.gif)
#26
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
115mm Tb. yes it will have the Big stuff Traction control. What kinda of wastegate combo do you guys think we need? bov's? I love looking at the block the pistion skirts are still in the sleave at bdc should last a little while. will be spraying around a 250 shot Direct port in the first coupple hundred feet. Do you guys think it needs a 4 or 5 speed lenco? i think 4 should be fine. clutch or tourque converter? Its going to run off of gasoline i think (to much fuel to run meth) Whats your thoughts?
A fab 9 in will work for this Hp right???? i hope... What spindles and front breaks will it need? Have to be able to put street size front tires on it!
A fab 9 in will work for this Hp right???? i hope... What spindles and front breaks will it need? Have to be able to put street size front tires on it!
Last edited by Generic0; 09-14-2010 at 11:31 PM. Reason: 115 mm TB NOT 114mm