elias_799

iTrader: (8)

i am switching to SD finally and plan too run a little over 15 psi, so the cobalt 2 bar is no use to me

i am just wondering what 3 bar map sensor you guys use and which one is best ?

RS_SS69

iTrader: (31)

GM 3 bar sensor.

http://www.bmotorsports.com/shop/pro...roducts_id/442

They also make the harness that plugs from fatory to this for $20.

Phil99vette used this same sensor last season, I know cause I bought it from him.

Sorry for the non sponser link

Shawn @ VA Speed

iTrader: (3)

yes,the gm 3 bar is by far the best-we have had no issues with them over the last 10 years or so.

Jontall

I posted all the MAP sensor info here so there is no need for a harness: https://ls1tech.com/forums/forced-in...ap-sensor.html

elias_799

iTrader: (8)

how will i adapt that 3 bar map sensor to the back of my intake manifold ?

it looks much different then the factory ls1 map sensor

also is there anybody that can sell me the map sensor and the plug, preferably a sponsor on this site

RS_SS69

iTrader: (31)

Tap the intake and thread in a barbed nipple then run a short hose between the 2.

elias_799

iTrader: (8)

^^^thanks, no adapter needed for the plug ?


Shawn, you have a 3 bar map sensor that you can sell me ?

gm dealers in Canada are absolutely ridiculous, even with my business account with them

RS_SS69

iTrader: (31)

^^^The website I listed in my first reply they sell the adapeter harness for the plug, im sure you can get one that will work with the stock harness.

Fireball

iTrader: (21)

you can buy the adapter direct from caspers