P1SC owners
06-02-2010, 04:36 PM
#4
TECH Resident
iTrader: (12)
Join Date: Nov 2007
Location: Alton IL.
Posts: 873
Likes: 0
Received 0 Likes
on
0 Posts
i have tr224 cam with 112 lsa, long tube headers, ls6 intake, ported tb, tsp x pipe, 60lb injectors, in tank 255 pump, with 4.38 pulley making 5lb. 430hp 470trq on safe tune 11.1 a/f ratio. 8 rib setup....
06-02-2010, 04:39 PM
#5
TECH Resident
iTrader: (12)
Join Date: Nov 2007
Location: Alton IL.
Posts: 873
Likes: 0
Received 0 Likes
on
0 Posts
[QUOTE=pdasterly;13413747]Nothing special. I made 470 rwhp, with 5.7 9.1cr. ls9 cam headers, no cats, stock ls1 intake, 3.5 pulley, 42lb injectors. My injectors are maxed out[/QUOT
how much boost are you making with that pulley? i am trying to make around 10 and not sure what pulley i need. in the video your bypass valve sounds loud as hell. is that the one that comes with the kit?
how much boost are you making with that pulley? i am trying to make around 10 and not sure what pulley i need. in the video your bypass valve sounds loud as hell. is that the one that comes with the kit?
06-02-2010, 04:59 PM
#7
TECH Apprentice
Join Date: Sep 2005
Location: Bay Area, CA
Posts: 360
Likes: 0
Received 0 Likes
on
0 Posts
[QUOTE=LSXFORMULA99;13414774] Im on a 6rib and running the 3.0 pulley and making 9-9.5psi FWIW
Nothing special. I made 470 rwhp, with 5.7 9.1cr. ls9 cam headers, no cats, stock ls1 intake, 3.5 pulley, 42lb injectors. My injectors are maxed out[/QUOT
how much boost are you making with that pulley? i am trying to make around 10 and not sure what pulley i need. in the video your bypass valve sounds loud as hell. is that the one that comes with the kit?
how much boost are you making with that pulley? i am trying to make around 10 and not sure what pulley i need. in the video your bypass valve sounds loud as hell. is that the one that comes with the kit?
Trending Topics
06-02-2010, 05:19 PM
#8
TECH Resident
iTrader: (12)
Join Date: Nov 2007
Location: Alton IL.
Posts: 873
Likes: 0
Received 0 Likes
on
0 Posts
damn, i thought if i went with the 3.75 or 3.5 pulley i would get 10lb. but if u are on the 3.0 pulley only getting 9 idk what i should do. i guess every engine is different tho
06-03-2010, 12:08 PM
#11
I dont know what psi, my boost gauge isn't reading. The 470 was made with a 6 rib and 3.5 combo in the video in my sig. I upgraded injectors and purchased a morgan motorsports crank pulley which is bigger and replaced the procharger pulley with a 3.2, i picked both up here in the classified section. Also swapped stock ls1 intake for a professional products setup with throttle body, it was cheap. Looking for 600 rwhp. Bob from epp has a post saying his D1 went from 7 psi to 15 psi with the mms crank pulley swap. I'm waiting for a retune and new dyno number when I get my car back, will post video of dyno. As far as the bypass, I don't know. I bought the system used but the valve looks like the small ati valve. I have a k&n attached to the bypass valve, vented to the clouds.
Not my car but setup is the same
Not my car but setup is the same
Last edited by pdasterly; 06-03-2010 at 12:24 PM.
06-03-2010, 03:17 PM
#12
Here's my brother's LT1 Formula from the old website. http://www.exoticperformanceplus.com...tCar.php?car=7 Bob
__________________
ATI ProCharger and Moser Sales 260 672-2076
PM's disabled, please e-mail me
E-mail: brutespeed@gmail.comob@brutespeed.com
https://brutespeed.com/ Link to website
ATI ProCharger and Moser Sales 260 672-2076
PM's disabled, please e-mail me
E-mail: brutespeed@gmail.comob@brutespeed.com
https://brutespeed.com/ Link to website
06-03-2010, 03:29 PM
#13
TECH Apprentice
Join Date: Sep 2005
Location: Bay Area, CA
Posts: 360
Likes: 0
Received 0 Likes
on
0 Posts
06-03-2010, 06:48 PM
#15
what size pulleys come from ATI when you order the 6rib p1sc kit for a ls1 fbody? the 6psi kit version? im not at my car and wont be to measure my pulleys but thats the kit I ordered and I see 5.5psi roughly so its bout right, but as for measurements Im not sure.. Id like to go up to 10-12psi after the forged motor is built so what pulley size ill need then I have no idea haha!
06-03-2010, 06:55 PM
#16
TECH Regular
Thread Starter
iTrader: (11)
Join Date: Nov 2005
Location: DFW Tx
Posts: 446
Likes: 0
Received 0 Likes
on
0 Posts
what size pulleys come from ATI when you order the 6rib p1sc kit for a ls1 fbody? the 6psi kit version? im not at my car and wont be to measure my pulleys but thats the kit I ordered and I see 5.5psi roughly so its bout right, but as for measurements Im not sure.. Id like to go up to 10-12psi after the forged motor is built so what pulley size ill need then I have no idea haha!
06-04-2010, 10:03 AM
#18
10 Second Club
iTrader: (11)
Join Date: Apr 2003
Location: Surf City, NC
Posts: 1,151
Likes: 0
Received 0 Likes
on
0 Posts
I am making 550rwhp and 515 ft lbs. thru the th-400. Cam is a true baby boost cam 214/224 .563/.563 114LSA and the converter is a PTC 3800. I make around 8-9 psi with a 3.5"RR pulley and MMS crank pulley. Alky control Kit with 50/50 mix. Moser 12 bolt with 3.73's but soon going to some 3.08's! My compression ratio is 9.6:1 on the motor. Other mods and info in sig.
Last edited by Packy; 06-04-2010 at 11:25 AM.
06-04-2010, 12:06 PM
#20
Launching!
Join Date: Apr 2010
Location: Sand Springs, OK
Posts: 285
Likes: 0
Received 0 Likes
on
0 Posts
on a stock 4.8, with bigger injecters, and stock fuel pump, pushing up to 8 or so lbs before the fuel pump couldnt keep up...
Heres the dyno sheet.
http://truck.xtremeownage.com/images/dyno/SANY0029.JPG
Heres the dyno sheet.
http://truck.xtremeownage.com/images/dyno/SANY0029.JPG