F2 Procharger C6 setup is getting close...
#1
Thread Starter
9 Second Club
iTrader: (24)
Joined: Oct 2006
Posts: 2,796
Likes: 1
From: Kennesaw, Georgia
F2 Procharger C6 setup is getting close...
Well there has been some debate on other forums that the F2 procharger will not fit or line up correctly with factory procharger brackets. Well it fits and fits great. Here some pics and as soon as I get the cog pulley for the head unit I can get a belt measurement. This particular setup is for a C5 or C6 Corvette. We will be ready for the Holley fest and the lsx shootout again this year as well
#3
Thread Starter
9 Second Club
iTrader: (24)
Joined: Oct 2006
Posts: 2,796
Likes: 1
From: Kennesaw, Georgia
The motor is the same LSX427 that I had in the white T/A with the 94mm turbo.I had the motor completely refreshed and went with a larger solid roller camshaft this time around as well.(.670-.670 lift-.250.260dur@.50 on a 116lsa) The limiting factor of this setup is the tranny. The tranny is however the stage7 from FLT and I have full confidence in it at this power level. I will be limiting the power to appx.950rwhp. We should have it all installed by the end of next week. I will take some progress pics as we go.
#4
The motor is the same LSX427 that I had in the white T/A with the 94mm turbo.I had the motor completely refreshed and went with a larger solid roller camshaft this time around as well.(.670-.670 lift-.250.260dur@.50 on a 116lsa) The limiting factor of this setup is the tranny. The tranny is however the stage7 from FLT and I have full confidence in it at this power level. I will be limiting the power to appx.950rwhp. We should have it all installed by the end of next week. I will take some progress pics as we go.
__________________
ATI ProCharger and Moser Sales 260 672-2076
PM's disabled, please e-mail me
E-mail: brutespeed@gmail.comob@brutespeed.com
https://brutespeed.com/ Link to website
ATI ProCharger and Moser Sales 260 672-2076
PM's disabled, please e-mail me
E-mail: brutespeed@gmail.comob@brutespeed.com
https://brutespeed.com/ Link to website
Trending Topics
#8
Been there done that in '07. You will want to read this thread to understand all the headaches we went through to get it to work. You will need to run the F2 on a dedicated belt, guaranteed. He has now since stepped down to an F1C. Good Luck!!
https://ls1tech.com/forums/forced-in...good-luck.html
https://ls1tech.com/forums/forced-in...good-luck.html
#9
Thread Starter
9 Second Club
iTrader: (24)
Joined: Oct 2006
Posts: 2,796
Likes: 1
From: Kennesaw, Georgia
Been there done that in '07. You will want to read this thread to understand all the headaches we went through to get it to work. You will need to run the F2 on a dedicated belt, guaranteed. He has now since stepped down to an F1C. Good Luck!!
https://ls1tech.com/forums/forced-in...good-luck.html
https://ls1tech.com/forums/forced-in...good-luck.html
#10
#13
House of boost built C6 ZO6 with forged 427ci LS7 stock 4bolt heads
RPM 4L60E transmission swap
LMR Tuned the car (very safe tune from what I read)
with 16psi made 1080rwhp
What fuel are you planning to run??
#14
Thread Starter
9 Second Club
iTrader: (24)
Joined: Oct 2006
Posts: 2,796
Likes: 1
From: Kennesaw, Georgia
The one HOB built has a 4l80e conversion I thought? If it only took 16psi, then I am golden. My motor has better heads and a bigger camshaft so it should breathea little eaasier than the one they built.I will be running a mixture of pump and race gas. Depends on what festiv activities are going on at the time.LOL
#17
Thread Starter
9 Second Club
iTrader: (24)
Joined: Oct 2006
Posts: 2,796
Likes: 1
From: Kennesaw, Georgia
We got the drive line removed on saturday out of the Corvette. Should have everything swapped out this week and back in the car by the end of the week. I will keep plenty of pics going during the process.
#18
The one HOB built has a 4l80e conversion I thought? If it only took 16psi, then I am golden. My motor has better heads and a bigger camshaft so it should breathea little eaasier than the one they built.I will be running a mixture of pump and race gas. Depends on what festiv activities are going on at the time.LOL
I think your right it was 4l80e
#19
Thread Starter
9 Second Club
iTrader: (24)
Joined: Oct 2006
Posts: 2,796
Likes: 1
From: Kennesaw, Georgia
Well I had a little time today so I got the new motor and transmission and converter all swapped out. I also installed the new Cartek Flip Drive Kit as well.
I am going to run the setup N/A for a week or 2 and get the motor broken in while I await the intercooler setup to get here. Then I will install the F2r and let her eat.
The Tranny Is a FLT Stage 7 4l65/70e , the converter is a Circle D Billet,American Racing 2in. primary race headers.
Here are some more pics.
I am going to run the setup N/A for a week or 2 and get the motor broken in while I await the intercooler setup to get here. Then I will install the F2r and let her eat.
The Tranny Is a FLT Stage 7 4l65/70e , the converter is a Circle D Billet,American Racing 2in. primary race headers.
Here are some more pics.