Intakes for boost
#1
Intakes for boost
i think we need to get a sticky going for us new guys about this info so we dont waste money.
something like this. please Mods feel re to modify this and others add to it.
up to 1000 Horse
Ls6 intake
single plane
over 1000
willson
marcella
single plane
and lets talk and put real HANDS ON info for these intakes
Fast 90
Fast 92
New Fast 102
Ls2
Fibertune
Ls3
L76
Edlebrock proflow
Ls7
^^^ in know with the fast they say no. but were is the breakig point so if you only are ever going to run 10psi will it work? info like that
we need this a sticky with info. but Hands on Info. it might be best if shops/sponsor only can answer this stuff. so we dont get all the internet Einsteins.
Mods you do with it what you want.
Thanks
something like this. please Mods feel re to modify this and others add to it.
up to 1000 Horse
Ls6 intake
single plane
over 1000
willson
marcella
single plane
and lets talk and put real HANDS ON info for these intakes
Fast 90
Fast 92
New Fast 102
Ls2
Fibertune
Ls3
L76
Edlebrock proflow
Ls7
^^^ in know with the fast they say no. but were is the breakig point so if you only are ever going to run 10psi will it work? info like that
we need this a sticky with info. but Hands on Info. it might be best if shops/sponsor only can answer this stuff. so we dont get all the internet Einsteins.
Mods you do with it what you want.
Thanks
#4
Banned
iTrader: (7)
Join Date: Oct 2003
Location: Pittsburgh!!!!!!!! Pa
Posts: 4,893
Likes: 0
Received 0 Likes
on
0 Posts
ive pushed 20psi thru a Ls2 with a pt88 had no issues that i could tell with the intake. I dailyed 16psi thru that intake for close to 7k. The intake is being used now for my turbo camaro project
at 16psi i dynod 702 with a rich 10.4 afr on a 4.8 and rev'd 7500 for shift points. combo showed no sign of dropping off
at 16psi i dynod 702 with a rich 10.4 afr on a 4.8 and rev'd 7500 for shift points. combo showed no sign of dropping off
#5
Restricted User
iTrader: (17)
Fibertuned is no good for boost, or anything that wants to make power below 6500. We did some pretty extensive testing on it. If you search Fibertuned with threads started by me you will find a large write up on it.
I am putting 20 psi to my FAST90 without issue but I did epoxy all the layers together.
I am putting 20 psi to my FAST90 without issue but I did epoxy all the layers together.
Trending Topics
#11
I'm running the Edelbrock Pro Flo and I love it! I was thinking about getting a Victor but I was told that I would lose a lot of low end power which would not be cool since it's my daily driver.
The Pro Flo looks sick under the hood too!
The Pro Flo looks sick under the hood too!
#16
Banned
iTrader: (7)
Join Date: Oct 2003
Location: Pittsburgh!!!!!!!! Pa
Posts: 4,893
Likes: 0
Received 0 Likes
on
0 Posts
actually the truck intake outflows the ls6 one. Truck guys have proved this time after time. The ls6 gains trucks no positive results. the long runners of the truck intake helps the motors, however it doesnt fit under the hood very well of a fbody unless you do some modifying
#18
10 Second Club
iTrader: (33)
I've heard this before also, for now I'm running a stock ls1 intake on my rx7, we're also using a stock intake on maxxmitchell's car that went 9.9 at 3700lbs on a stock 6.0 w/ a cam. I'm wondering if I could gain much going to an ls6 intake, but never have been able to find anywhere that people did a direct comparison.
#19
TECH Fanatic
iTrader: (6)
I don't think many have done both. I've got a Super Vic on my new engine. I'll be able to tell you how it likes a NA 370 with 9.3:1 at the end of the week. I'm not putting my turbo on until the end of October, so I will be NA for a while. It will be pretty neat to be able to compare my NA numbers to my boosted numbers and see how much I pick up per pound of boost. Going to be using a TV75 hybrid with an 80mm Garrett compressor in a rearmount application.
#20
Restricted User
iTrader: (17)
I am under the impression that the Super Vic has a slightly longer runner which should LOWER the powerband a little.
Whatever it's good for on the motor NA, it will be about double at 15 psi. As far as the intake seperating inside, I would think that it would be a smaller and smaller penalty as you get into higher RPM.
I've heard this before also, for now I'm running a stock ls1 intake on my rx7, we're also using a stock intake on maxxmitchell's car that went 9.9 at 3700lbs on a stock 6.0 w/ a cam. I'm wondering if I could gain much going to an ls6 intake, but never have been able to find anywhere that people did a direct comparison.