Pro Charger!!
#1
Launching!
Thread Starter
iTrader: (11)
Join Date: Nov 2007
Location: Seymour, IN
Posts: 275
Likes: 0
Received 0 Likes
on
0 Posts
Pro Charger!!
Is anybody running a procharger with a forged 346? If so what unit are you running, how much boost, and how much power at the wheels are you making. Also what heads are you running if they are after market. Im looking to procharge the SS once i get it paid off Got less than $5K left . I wanting to get at least 650 whp on pump gas 93 octane. Any and all suggestions are appreciated!
#6
LS1Tech Sponsor
iTrader: (16)
https://ls1tech.com/forums/forced-in...ou-making.html
Here is a recent thread that should help you out. Bob
Here is a recent thread that should help you out. Bob
__________________
ATI ProCharger and Moser Sales 260 672-2076
PM's disabled, please e-mail me
E-mail: brutespeed@gmail.comob@brutespeed.com
https://brutespeed.com/ Link to website
ATI ProCharger and Moser Sales 260 672-2076
PM's disabled, please e-mail me
E-mail: brutespeed@gmail.comob@brutespeed.com
https://brutespeed.com/ Link to website
#7
LS1Tech Sponsor
iTrader: (16)
https://ls1tech.com/forums/vehicles-...-inch-etc.html
http://www.google.com/url?q=https://...aZjRcA&cad=rja
Here was an excellent car to see just what can be done with a 347 and a ProCharger. Bob
http://www.google.com/url?q=https://...aZjRcA&cad=rja
Here was an excellent car to see just what can be done with a 347 and a ProCharger. Bob
__________________
ATI ProCharger and Moser Sales 260 672-2076
PM's disabled, please e-mail me
E-mail: brutespeed@gmail.comob@brutespeed.com
https://brutespeed.com/ Link to website
ATI ProCharger and Moser Sales 260 672-2076
PM's disabled, please e-mail me
E-mail: brutespeed@gmail.comob@brutespeed.com
https://brutespeed.com/ Link to website
Trending Topics
#11
Launching!
Thread Starter
iTrader: (11)
Join Date: Nov 2007
Location: Seymour, IN
Posts: 275
Likes: 0
Received 0 Likes
on
0 Posts
https://ls1tech.com/forums/forced-in...ou-making.html
Here is a recent thread that should help you out. Bob
Here is a recent thread that should help you out. Bob
#12
Launching!
Thread Starter
iTrader: (11)
Join Date: Nov 2007
Location: Seymour, IN
Posts: 275
Likes: 0
Received 0 Likes
on
0 Posts
I was thinking of going either forged 346/7 or going the iron block 6.0l route. Seems the d1 is perfect for me. on top of that getting the right heads and going fast 102/102 intake. I have 1 /34 longtubes so if i kept them but went true duals that are 3" from the headers to x-pipe and 2.5" from the x-pipe back like i have been planning on. would that flow enough. also will the racetronix fuel pump kit push enough fuel for my needs
#14
TECH Resident
Tsp forged 347, prc 2.5 ls6s,small blower cam, ls6 intake with a d1sc and a 8lb pulley. I make north of 550 with a very conservative tune..with the addition of some supporting mods i hope to run in the low 10s as a m6.
#15
11 Second Club
iTrader: (5)
Build and numbers in sig. I have a forged 370 done and waiting to go in. My plan is to max out the blower and see what she does. Quite a few guys are well into the 700's with a similar build. Search for a thread "procharger guys" by tabur unit. My build and a lot of other guys builds are in that thread.
#16
11 Second Club
iTrader: (12)
Join Date: Nov 2005
Location: Fort Wayne, Indiana
Posts: 636
Likes: 0
Received 0 Likes
on
0 Posts
I built a 2001 Camaro SS three years ago for a customer that is making 747 rwhp with this combo
383
6.0 truck heads ( LPE ported )
JPH Custom Blower cam
Kooks 1 7/8
Off road Y-pipe
Electric cutout
Fast 78mm intake and tb
Stock Maf
D1SC
Twin High Flow intercoolers
Lonnies Fuel system Tuned on 93 oct.
Alky Meth kit
12-13psi 8rib setup
6 speed w/Tex. clutch
S60 rear
383
6.0 truck heads ( LPE ported )
JPH Custom Blower cam
Kooks 1 7/8
Off road Y-pipe
Electric cutout
Fast 78mm intake and tb
Stock Maf
D1SC
Twin High Flow intercoolers
Lonnies Fuel system Tuned on 93 oct.
Alky Meth kit
12-13psi 8rib setup
6 speed w/Tex. clutch
S60 rear
#19
LS1Tech Sponsor
iTrader: (16)
You're welcome.
Your headers easily get you 650 rwhp, as well as your planned exhaust system. I would use two Racetronix/Walbro fuel pumps in the tank for 650 to 700 rwhp.
Your Camaro is running well! Bob
I was thinking of going either forged 346/7 or going the iron block 6.0l route. Seems the d1 is perfect for me. on top of that getting the right heads and going fast 102/102 intake. I have 1 /34 longtubes so if i kept them but went true duals that are 3" from the headers to x-pipe and 2.5" from the x-pipe back like i have been planning on. would that flow enough. also will the racetronix fuel pump kit push enough fuel for my needs
Your Camaro is running well! Bob
__________________
ATI ProCharger and Moser Sales 260 672-2076
PM's disabled, please e-mail me
E-mail: brutespeed@gmail.comob@brutespeed.com
https://brutespeed.com/ Link to website
ATI ProCharger and Moser Sales 260 672-2076
PM's disabled, please e-mail me
E-mail: brutespeed@gmail.comob@brutespeed.com
https://brutespeed.com/ Link to website