Sluggish

iTrader: (10)

Thanks, intake is 9.5"-9.75" tall

JAX04

iTrader: (17)

Thank you sir!

Sluggish

iTrader: (10)

Completed the exhaust, it fits well and does hit anything while performing an earthquake test. It should sound awesome.

Reject

iTrader: (24)

aaaw sheet looks sweet

Sluggish

iTrader: (10)

If anyone has an alternator bracket for sale or trade PM me. I have a smokinhawk relocation bracket to trade if someone is putting a truck manifold kit on their car.

MUSTANGBRKR02

iTrader: (91)

Looking awesome. I will check to see if i still have a stock bracket later today.

Sluggish

iTrader: (10)

Finished redoing my fuel system, should be able to get max effort out of my 2 pumps now. I couldn't fit a Y in the bucket with the old setup so I had to use a T and didn't care for it at all.
Old setup


New setup







Forgot a picture of the regulator.

Also got my injectors back from FIC. They bumped them up to 80lb from 60. Making 2 of them 82lber for the back two cylinder. So I put the intake back together and put it on the car.



Also pulled the hotside off for hopefully the last time to weld the bungs on and the v-band.

After I read this the more I thought about it the more worried I got about them cracking, so I'm going to run another pass over the welds I fused. After that I will probably drop them off to have coated this week.



I found someone on here that is trading me my relocating bracket for a stocker, so I only a few things left to order to finish.

camaro383

iTrader: (13)

hey man ur build is badass, and you inspired me to build my own headers now, if you dont mind helpin me out though, did you weld bullets in those collectors so that the inside quarters of the pipes would seal, and i found those collectors on columbia mandrel but they only have 1.75" primaries to 3" outlets, did you run a 3" crossover?


thanks

98blackbirdta

iTrader: (7)

Where did you get ur intake coated? And where are going to take you hot parts to get coated??? Need to send mine in.

Sluggish

iTrader: (10)

You have to call them, they have 2.5" collectors, that's what I used. I used these to fill the center
http://www.stainlessworks.net/cart/p...oducts_id=1652

Xtreme Powder Coating in Beaumont. They do ceramic coating also but only have a satin black color. Their good people, I know if there is an issue I can go back and they will take care of it. Their also local to me.

98blackbirdta

iTrader: (7)

ahhhh sweet...wish they had a polished ceramic coating though

trans2000am

iTrader: (49)

what did it cost u to get the 60's turned into 80's ?

Sluggish

iTrader: (10)

$200...

CarsandWomen

iTrader: (19)

I think polydyn does, a friend of mine does powder coating too but no ceramic

Sluggish

iTrader: (10)

That's who did my last kit, it burnt off.

CarsandWomen

iTrader: (19)

just out of curiosity, what color was it and what did polydyn say about it burning off?

somebody else has a chrome ceramic coating, ive seen it but cant find it now. I gotta go to work though, ill see if i can find it later. I really wanna say I found it through the PTP website but a quick search drew a blank

Sluggish

iTrader: (10)

Finally after a month I get my parts back from coating, I will hopefully be installing it tomorrow.

MUSTANGBRKR02

iTrader: (91)

Looks really good! Get that thing together and drive it!!

Sluggish

iTrader: (10)

Hopefully this weekend, if all is well track next weekend

robbyredneck

iTrader: (1)

rock that f***ker slug. man that looks awesome.