2000 WS6 F1A Build thread!!!
#102
TECH Resident
Thread Starter
iTrader: (9)
Join Date: Feb 2005
Location: Fort Wayne, IN
Posts: 831
Likes: 0
Received 0 Likes
on
0 Posts
Thanks Braden!! You will have to check it out once Nate and I are done!
----Worked on the car tonight......No pictures, those will come Monday night....gotta work this weekend so won't make any progress till then. Got alot of the welding smoothed out and also Nate talked me into filling in the TRAC control indent (Don't have TRAC control on my car) on the passenger wheel well which I wasn't so hot about that idea at first, but it will make the engine bay look much much cleaner and I am happy we did it now that it's done!! Pictures to follow....Monday!
----Worked on the car tonight......No pictures, those will come Monday night....gotta work this weekend so won't make any progress till then. Got alot of the welding smoothed out and also Nate talked me into filling in the TRAC control indent (Don't have TRAC control on my car) on the passenger wheel well which I wasn't so hot about that idea at first, but it will make the engine bay look much much cleaner and I am happy we did it now that it's done!! Pictures to follow....Monday!
Last edited by Bigrob339; 01-21-2011 at 07:50 AM.
#103
11 Second Club
iTrader: (12)
Join Date: Nov 2005
Location: Fort Wayne, Indiana
Posts: 636
Likes: 0
Received 0 Likes
on
0 Posts
Thanks Braden!! You will have to check it out once Nate and I are done!
----Worked on the car tonight......No pictures, those will come Monday night....gotta work this weekend so won't make any progress till then. Got alot of the welding smoothed out and also Nate talked me into filling in the cruise control indent (Don't have cruise control on my car) on the passenger wheel well which I wasn't so hot about that idea at first, but it will make the engine bay look much much cleaner and I am happy we did it now that it's done!! Pictures to follow....Monday!
----Worked on the car tonight......No pictures, those will come Monday night....gotta work this weekend so won't make any progress till then. Got alot of the welding smoothed out and also Nate talked me into filling in the cruise control indent (Don't have cruise control on my car) on the passenger wheel well which I wasn't so hot about that idea at first, but it will make the engine bay look much much cleaner and I am happy we did it now that it's done!! Pictures to follow....Monday!
#105
Race your car!
iTrader: (50)
Nice looking build. I'm helping out with a car that's got an f1a on it, what we ended up doing was we had a radiator made that as narrrow/thicker, and just offseet it over to the passenger's side so the blower would have enough room for a large filter sitting strait forward, this way we didn't have to redo too much of the car.
Looks good though, you have plenty of room in there for a big *** fiter that shouldn't be much of a restriction, and it should make working on the car alot easier as well in the future, which is ALWAYS nice.
Looks good though, you have plenty of room in there for a big *** fiter that shouldn't be much of a restriction, and it should make working on the car alot easier as well in the future, which is ALWAYS nice.
#106
11 Second Club
iTrader: (12)
Join Date: Nov 2005
Location: Fort Wayne, Indiana
Posts: 636
Likes: 0
Received 0 Likes
on
0 Posts
Nice looking build. I'm helping out with a car that's got an f1a on it, what we ended up doing was we had a radiator made that as narrrow/thicker, and just offseet it over to the passenger's side so the blower would have enough room for a large filter sitting strait forward, this way we didn't have to redo too much of the car.
Looks good though, you have plenty of room in there for a big *** fiter that shouldn't be much of a restriction, and it should make working on the car alot easier as well in the future, which is ALWAYS nice.
Looks good though, you have plenty of room in there for a big *** fiter that shouldn't be much of a restriction, and it should make working on the car alot easier as well in the future, which is ALWAYS nice.
#109
TECH Resident
Thread Starter
iTrader: (9)
Join Date: Feb 2005
Location: Fort Wayne, IN
Posts: 831
Likes: 0
Received 0 Likes
on
0 Posts
Well its been awhile since I have updated....seems like everytime we would plan to work on this thing, it would end up snowing and of course Nate and I do snow removal so the car got put on hold!!
We ended up changing the intercooler around a bit after Nate talked to Bell Intercoolers....we ended up flipping the inlet tank to the top and then having a 3.5" outlet welded on. Also had two mounting tabs per side welded onto the intercooler for our fog lights. Thanks to Bill Davis for his amazing work!!
We also had Bill do a little work to the radiator...welded on our steamtube and also he fabricated a fan shroud for it. Still deciding on what we want for fans......
Also this week I had these show up......
Hopefully this week we can finish up the fog lights and the little welding we got to do. This thing will be off to paint in 2 weeks is the plan then back for reassembly. JPH (Joe) has to get this motor assembled also !!
Will update more Monday as long as it doesnt snow and we work on it
We ended up changing the intercooler around a bit after Nate talked to Bell Intercoolers....we ended up flipping the inlet tank to the top and then having a 3.5" outlet welded on. Also had two mounting tabs per side welded onto the intercooler for our fog lights. Thanks to Bill Davis for his amazing work!!
We also had Bill do a little work to the radiator...welded on our steamtube and also he fabricated a fan shroud for it. Still deciding on what we want for fans......
Also this week I had these show up......
Hopefully this week we can finish up the fog lights and the little welding we got to do. This thing will be off to paint in 2 weeks is the plan then back for reassembly. JPH (Joe) has to get this motor assembled also !!
Will update more Monday as long as it doesnt snow and we work on it
#110
TECH Resident
Thread Starter
iTrader: (9)
Join Date: Feb 2005
Location: Fort Wayne, IN
Posts: 831
Likes: 0
Received 0 Likes
on
0 Posts
Progress Update
Well here is a update on the progress......Motor is coming together and should all be buttoned up within 2 weeks and ready to drop in
--We got our fog light brackets all figured out. They will mount to our intercooler to the tabs that were welded on.
--We finished up all the welding and got her loaded up so we can start the mudding. Also got the fuel tank out and getting ready to send it out to Lonnies Performance for twin pumps.
--Finally got it dropped it off to my buddy Tim Kiefer who has done a amazing job painting this engine bay for me. The wheel wells are my favorite they look sick!!
Installing the K-member again to Tim can finish up his part and picking it up Saturday and bringing it home so the can start the assembly process!! Will have more updates as it comes together.....
--We got our fog light brackets all figured out. They will mount to our intercooler to the tabs that were welded on.
--We finished up all the welding and got her loaded up so we can start the mudding. Also got the fuel tank out and getting ready to send it out to Lonnies Performance for twin pumps.
--Finally got it dropped it off to my buddy Tim Kiefer who has done a amazing job painting this engine bay for me. The wheel wells are my favorite they look sick!!
Installing the K-member again to Tim can finish up his part and picking it up Saturday and bringing it home so the can start the assembly process!! Will have more updates as it comes together.....
#113
TECH Resident
Thread Starter
iTrader: (9)
Join Date: Feb 2005
Location: Fort Wayne, IN
Posts: 831
Likes: 0
Received 0 Likes
on
0 Posts
Well its been awhile since I posted a update....Joe has been slowly puttin the motor together. We put all kinds of nice parts inside the motor....yella terra rockers, crane lifters, 3/8 pushrods...etc.
Motor all together.... still got to run the fuel rail cross over and steam port lines.
Nate and I started back on the car also....got my boost and FP gauges in and also got the AFX wideband in...
Also got the Tick Master installed....
Here is how it sits and will update more tomorrow!!! Excited to pick the motor up this week and hopefully in the next 2 weeks put it in the car!!
Motor all together.... still got to run the fuel rail cross over and steam port lines.
Nate and I started back on the car also....got my boost and FP gauges in and also got the AFX wideband in...
Also got the Tick Master installed....
Here is how it sits and will update more tomorrow!!! Excited to pick the motor up this week and hopefully in the next 2 weeks put it in the car!!
#120
LS1Tech Sponsor
iTrader: (16)
Looks great Rob! It should come together rather quickly now that the engine is built. Bob
__________________
ATI ProCharger and Moser Sales 260 672-2076
PM's disabled, please e-mail me
E-mail: brutespeed@gmail.comob@brutespeed.com
https://brutespeed.com/ Link to website
ATI ProCharger and Moser Sales 260 672-2076
PM's disabled, please e-mail me
E-mail: brutespeed@gmail.comob@brutespeed.com
https://brutespeed.com/ Link to website