Bob@BruteSpeed

iTrader: (16)

I agree, it is a great looking build! Bob

vicouSS00

iTrader: (47)

What size fuel pump are you running? Sorry if I read over it..

NASTYTRANSAM

iTrader: (12)

We are using the Lonnie's Performance dual In tank pump kit he offers.

Bigrob339

iTrader: (9)

They are lonnies double pump kit. After looking at the kit, the quality is amazing!!!

02SOMLS1WS6

Need an update, is anything getting done on the car this weekend? It is coming along quick do you think your going to be able to make powertour or are you going to wait for Frost to tune it which is after tour?

MJs1FastSS

iTrader: (149)

amazing detail and great job so far ..congrats and soon to enjoy this beast

Bigrob339

iTrader: (9)

Well its at Bills and he is fabricating all the charge pipes, v-bands on my entire exhaust, mounting the fan to the radiator shroud, bracket for my vacuum block, the aster bracket would not line up so he had to machine some of the stand offs to make it line up perfectly. Ill get pictures up as soon as I get it back. I will be waiting for frost to tune it come june 18th he has my pcm for the base tune right now.

SnIpEz

iTrader: (4)

Good choice with Lonnies setup, I called that guy up awhile back and talked to him on the phone and that guy REALLY knows his stuff, fuel system genius no doubt. This build is going to be so badass, please tell me you're going to take a good quality video of the first fire up and a bit of idle?

brian_king25

iTrader: (1)

Quick question! I am building the same set up with an F1A, Lonnies and the aster bracket. Why would it not line up? Should be getting my kit, motor and trans next week so I am just wondering if I am going to have to do anything extra with the Aster.

Thanks

Bob@BruteSpeed

iTrader: (16)

Hi Brian, Chris has recently modified the height of the stand-offs so the bracket should correctly align up. Bob

Bigrob339

iTrader: (9)

Ya Bob is correct, I talked to Chris and he told me what one to machine but it still did not line up so Bill had to modify all 3 stand offs to make it line up 100%. I dont know if all of mine were just that off or what but its all good now!!!

LS1RedZ

iTrader: (19)

Yeah his Dual intank kits are bad *** and easy to install. I think its well worth the money.

Bigrob339

iTrader: (9)

Courtesy of Bill Davis Fabrication--All my charge pipes are done, 4in Procharger intake, v-band entire exhaust, top radiator cover and alot of other little things.....here is a teaser pic.... Picture doesnt do it justice will post more later!!

96silverram

iTrader: (12)

Looking good, Rob.

The Alchemist

iTrader: (19)

That's a badass looking setup. Very clean. Is it 4" pipe from the headunit to the throttle body?

Bigrob339

iTrader: (9)

No its 3" from the headunit to the intercooler then goes out 3.5" from the intercooler and then to 4" just before it comes into the engine bay. Ill post some more pictures up soon just dropped some stuff off at the powder coaters should have it back Friday.

FYI--Bill was able to get a true 4" intake on the headunit for the air filter!!

ChevyChad

iTrader: (50)

Please post pics of the inlet.. Are you going to be running A/C?

Bigrob339

iTrader: (9)

We took it all apart again to clean up the charge pipes and get some stuff to the powder coaters but I will get a pic of the air inlet asap prolly this weekend, no a/c only had used it maybe 10 times in 6 years.....stay tuned for pics

96silverram

iTrader: (12)

I'm waiting....

No Juice

iTrader: (11)

Any pics of the double pump kit?