E85 Who has done it?
#21
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
E85 is jiggawatt juice. I love the stuff.
I use it in all of my cars other than all out drag/dyno.
Example: (88mm, 408ci) we went from 803rwhp to 891rwhp with nothing else other than a complete re-tune.
Due to the swap we could run a couple psi more and still be on a safer tune than with our 98 octane (your 93) and that car gets driven around 900km (550 mile) a week
Its cheap, you get huge power gains, cooler temps plus its good for the the globe
I use it in all of my cars other than all out drag/dyno.
Example: (88mm, 408ci) we went from 803rwhp to 891rwhp with nothing else other than a complete re-tune.
Due to the swap we could run a couple psi more and still be on a safer tune than with our 98 octane (your 93) and that car gets driven around 900km (550 mile) a week
Its cheap, you get huge power gains, cooler temps plus its good for the the globe
![Happy](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_stretch.gif)
#23
Restricted User
iTrader: (17)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
We've run a bunch of 7.9's @ 180+ MPH in LS2Formula's car on the "jiggajuice." LOL. It's a 3450# full interior legit street car. We are working out some bugs right now as we switched the engine management system but I hope to see a 7.70 pass before the end of the winter (our race season down here in Hell).
#24
FormerVendor
iTrader: (1)
Join Date: Oct 2010
Location: Dallas, Tx
Posts: 138
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
DO oversize your injectors. I like the ID2000s. PM for a good price. If Nick is tuning it, he will love you. He and I have known each other for 6/7 years now, so feel free to use what I have learned so far to reduce your learning curve.
DO run a big feed line. I always oversize atleast one size up. Its never hurt. Its always hurt when I run into pressure drop or improper line sizing because I went too small.
DO run a BIG stainless fuel filter. 25micron or smaller. I like the Monster Mesh from Kinsler.
DO test your E85. It takes a 125$ tester to test it and an ohm meter. Ive heard of less than E70 at some pumps, but have tested personally, E70-E86 at the local pumps here in dallas all across the last 6 months. It just recently changed end of november to a winterish blend.
E85 starts out life at E100. Naturally, with no liquor license, it gets cut with crap to E98.
From there, you can purchase E98, and cut it yourself with your own 93, or 100 octane to achieve your E85, or what ever Ethanol content you wish.
E85 at the pump is cut with what ever, 87, drippings, refinery trash, what ever they pick.
Having said that, in a typical spark iginition engine, E70-E85 have virtually the same Antiknock qualities between them, with in 2%
It accepts the same timing as C16. You will usually melt parts before it knocks. Thats been my findings.
Other than that, use good Ethanol rated stuff, hard anodized aluminum, and stainless in your fuel system parts, and go to town!
Louis
#26
FormerVendor
iTrader: (1)
Join Date: Oct 2010
Location: Dallas, Tx
Posts: 138
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Kent-Moore J-44175, its a fuel composition tester. New around 500ish$? Used anywhere from 100-250. Shoot for a newer one, as there are some wear items if it was used a lot.
I test at the pump, takes about a minute, and a few goofy looks![Grin](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_grin.gif)
The Kroger in Sachse and the Kroger on frankford/midway both are currently E73-E76 as of a week or so ago
The pumps in Orlando for War of Imports were true E85
I test at the pump, takes about a minute, and a few goofy looks
![Grin](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_grin.gif)
The Kroger in Sachse and the Kroger on frankford/midway both are currently E73-E76 as of a week or so ago
![Happy](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_stretch.gif)
![Happy](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_stretch.gif)
#27
Restricted User
iTrader: (17)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
We use a tester that's just a little test tube with some lines on it. You fill to one line with water and the other line with e85. The ethanol mixes with the water and the gasoline floats to the top. The lines tell you the percentage.
Looks like this. It looks like this one.
![](http://www.streetlegaltv.com/forum/attachment.php?attachmentid=2756&stc=1&d=1248377363)
I think it was cheap. Like under $50 bucks.
Looks like this. It looks like this one.
I think it was cheap. Like under $50 bucks.
#28
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
E85 is working great for me so far. It takes 30-40% more fuel which is tough with an electric pump. i ran out of fuel at 850ish rwhp with a 4303 magnafuel.
i just checked my BS3 log, with 160lb injectors i am at 76% duty on E85 with a base fuel pressure of 50lbs. that at 14psi of so. 800rwhp.
not knowing much about your car make sure your fuel system is alky compatable. any filter with paper in it will gum up. it happend to me, mesh screen filters are the ones that work best. Easiest way to tune is assuming your gas tune is good. add 30% to you VE. thats what i did in Big stuff 3. then tune it to 11.0 a/f, i know my car seemed to make more power in the 10s a/f. some say its to rich. its up to you, a dyno will tell you where it is best.
Last edited by cjg454ss; 01-06-2011 at 08:55 PM.
#29
9 Second Club
Thread Starter
iTrader: (3)
Join Date: Apr 2007
Location: Western NC
Posts: 312
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
The Supra community has been running it for quite some time. Here are some Dos and Donts with it-
DO oversize your injectors. I like the ID2000s. PM for a good price. If Nick is tuning it, he will love you. He and I have known each other for 6/7 years now, so feel free to use what I have learned so far to reduce your learning curve.
DO run a big feed line. I always oversize atleast one size up. Its never hurt. Its always hurt when I run into pressure drop or improper line sizing because I went too small.
DO run a BIG stainless fuel filter. 25micron or smaller. I like the Monster Mesh from Kinsler.
DO test your E85. It takes a 125$ tester to test it and an ohm meter. Ive heard of less than E70 at some pumps, but have tested personally, E70-E86 at the local pumps here in dallas all across the last 6 months. It just recently changed end of november to a winterish blend.
E85 starts out life at E100. Naturally, with no liquor license, it gets cut with crap to E98.
From there, you can purchase E98, and cut it yourself with your own 93, or 100 octane to achieve your E85, or what ever Ethanol content you wish.
E85 at the pump is cut with what ever, 87, drippings, refinery trash, what ever they pick.
Having said that, in a typical spark iginition engine, E70-E85 have virtually the same Antiknock qualities between them, with in 2%
It accepts the same timing as C16. You will usually melt parts before it knocks. Thats been my findings.
Other than that, use good Ethanol rated stuff, hard anodized aluminum, and stainless in your fuel system parts, and go to town!
Louis
DO oversize your injectors. I like the ID2000s. PM for a good price. If Nick is tuning it, he will love you. He and I have known each other for 6/7 years now, so feel free to use what I have learned so far to reduce your learning curve.
DO run a big feed line. I always oversize atleast one size up. Its never hurt. Its always hurt when I run into pressure drop or improper line sizing because I went too small.
DO run a BIG stainless fuel filter. 25micron or smaller. I like the Monster Mesh from Kinsler.
DO test your E85. It takes a 125$ tester to test it and an ohm meter. Ive heard of less than E70 at some pumps, but have tested personally, E70-E86 at the local pumps here in dallas all across the last 6 months. It just recently changed end of november to a winterish blend.
E85 starts out life at E100. Naturally, with no liquor license, it gets cut with crap to E98.
From there, you can purchase E98, and cut it yourself with your own 93, or 100 octane to achieve your E85, or what ever Ethanol content you wish.
E85 at the pump is cut with what ever, 87, drippings, refinery trash, what ever they pick.
Having said that, in a typical spark iginition engine, E70-E85 have virtually the same Antiknock qualities between them, with in 2%
It accepts the same timing as C16. You will usually melt parts before it knocks. Thats been my findings.
Other than that, use good Ethanol rated stuff, hard anodized aluminum, and stainless in your fuel system parts, and go to town!
Louis
![Happy](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_stretch.gif)
i think ive seen your car at shady side.
E85 is working great for me so far. It takes 30-40% more fuel which is tough with an electric pump. i ran out of fuel at 850ish rwhp with a 4303 magnafuel.
i just checked my BS3 log, with 160lb injectors i am at 76% duty on E85 with a base fuel pressure of 50lbs. that at 14psi of so. 800rwhp.
not knowing much about your car make sure your fuel system is alky compatable. any filter with paper in it will gum up. it happend to me, mesh screen filters are the ones that work best. Easiest way to tune is assuming your gas tune is good. add 30% to you VE. thats what i did in Big stuff 3. then tune it to 11.0 a/f, i know my car seemed to make more power in the 10s a/f. some say its to rich. its up to you, a dyno will tell you where it is best.
E85 is working great for me so far. It takes 30-40% more fuel which is tough with an electric pump. i ran out of fuel at 850ish rwhp with a 4303 magnafuel.
i just checked my BS3 log, with 160lb injectors i am at 76% duty on E85 with a base fuel pressure of 50lbs. that at 14psi of so. 800rwhp.
not knowing much about your car make sure your fuel system is alky compatable. any filter with paper in it will gum up. it happend to me, mesh screen filters are the ones that work best. Easiest way to tune is assuming your gas tune is good. add 30% to you VE. thats what i did in Big stuff 3. then tune it to 11.0 a/f, i know my car seemed to make more power in the 10s a/f. some say its to rich. its up to you, a dyno will tell you where it is best.
#30
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Nick is the only one that will ever tune my car.
That said I'm sure he would love those injectors but my bank account wouldn't. I already have the impedence converter in place so I will be trying to stay with a low impedence injector. Thank you for all of the other tips. I have been talking to Lonnie at Lonnie Performance and we have some plans for the fuel system. I will keep all of your tips in mind as we upgrade. Your experience is much appreciated.
Thanks for the numbers. I have been to Shadyside several times and will go back there in the next season. Hope to see ya there!
![Happy](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_stretch.gif)
Thanks for the numbers. I have been to Shadyside several times and will go back there in the next season. Hope to see ya there!
#31
7 Second Club
iTrader: (7)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
When you made 850 rwhp and ran that 4303 out what transmission was in your vehicle? I am pretty sure I am getting near where my 4303 is going to run out of pressure but haven't seen it dip yet at WOT. What did you step up to next as I can't seem to find a pump that is bigger that is street friendly at all?
#32
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
When you made 850 rwhp and ran that 4303 out what transmission was in your vehicle? I am pretty sure I am getting near where my 4303 is going to run out of pressure but haven't seen it dip yet at WOT. What did you step up to next as I can't seem to find a pump that is bigger that is street friendly at all?
the 4303 is the largest magnafuel for street use. i bought another 4301 to run in parrallel but decided not to use it. i figured you need 2.8-3.0 gal/min for 1100-1200rwhp on E85 through a th400. the 4303 pumps out 2.5 gals/min. i added the alky kit which is 0.5 gals per min. to get me to 3g/min. my buddy ran a big magnafuel pump that is 3.1 gal/min and had good fuel pressure. You could also run a boost a pump. i might do that to mine in the future. a guy did on yellow bullet and it increase about 200hp worth of fuel.
hope this helps
Chris
#33
7 Second Club
iTrader: (7)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
it was a th400 with a loose converter. my buddies car did the same thing. mid 800rwhp with a th400 and 9inch of 12 bolt. with a 6 speed it would be 1000-1050 rwhp.
the 4303 is the largest magnafuel for street use. i bought another 4301 to run in parrallel but decided not to use it. i figured you need 2.8-3.0 gal/min for 1100-1200rwhp on E85 through a th400. the 4303 pumps out 2.5 gals/min. i added the alky kit which is 0.5 gals per min. to get me to 3g/min. my buddy ran a big magnafuel pump that is 3.1 gal/min and had good fuel pressure. You could also run a boost a pump. i might do that to mine in the future. a guy did on yellow bullet and it increase about 200hp worth of fuel.
hope this helps
Chris
the 4303 is the largest magnafuel for street use. i bought another 4301 to run in parrallel but decided not to use it. i figured you need 2.8-3.0 gal/min for 1100-1200rwhp on E85 through a th400. the 4303 pumps out 2.5 gals/min. i added the alky kit which is 0.5 gals per min. to get me to 3g/min. my buddy ran a big magnafuel pump that is 3.1 gal/min and had good fuel pressure. You could also run a boost a pump. i might do that to mine in the future. a guy did on yellow bullet and it increase about 200hp worth of fuel.
hope this helps
Chris
![Happy](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_stretch.gif)
Thanks that definitely helped!
#34
FormerVendor
iTrader: (1)
Join Date: Oct 2010
Location: Dallas, Tx
Posts: 138
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I agree on the boostapump. They get a REALLY bad rep due to being used on stock wiring, and stock pumps, but when wired correctly with good wire, they really help.
We use two bosch 044s, and they are right at the limit at 1100 rwhp. Enough to push a 3300 pound car to 160 in 1500 DA. I added some larger wiring, changed up the feed line a little bit in hopes to extend the pumps further. If that doesnt work, I will add a boost-a-pump. Its still a street car, we dont want to run a Dial-a-flow and a weldon, so twin intank pumps is where we want.
I forgot about the fuel filter- Stainless mesh is the only way. Paper will gum up for sure.
Louis
We use two bosch 044s, and they are right at the limit at 1100 rwhp. Enough to push a 3300 pound car to 160 in 1500 DA. I added some larger wiring, changed up the feed line a little bit in hopes to extend the pumps further. If that doesnt work, I will add a boost-a-pump. Its still a street car, we dont want to run a Dial-a-flow and a weldon, so twin intank pumps is where we want.
I forgot about the fuel filter- Stainless mesh is the only way. Paper will gum up for sure.
Louis
#35
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I agree on the boostapump. They get a REALLY bad rep due to being used on stock wiring, and stock pumps, but when wired correctly with good wire, they really help.
We use two bosch 044s, and they are right at the limit at 1100 rwhp. Enough to push a 3300 pound car to 160 in 1500 DA. I added some larger wiring, changed up the feed line a little bit in hopes to extend the pumps further. If that doesnt work, I will add a boost-a-pump. Its still a street car, we dont want to run a Dial-a-flow and a weldon, so twin intank pumps is where we want.
I forgot about the fuel filter- Stainless mesh is the only way. Paper will gum up for sure.
Louis
We use two bosch 044s, and they are right at the limit at 1100 rwhp. Enough to push a 3300 pound car to 160 in 1500 DA. I added some larger wiring, changed up the feed line a little bit in hopes to extend the pumps further. If that doesnt work, I will add a boost-a-pump. Its still a street car, we dont want to run a Dial-a-flow and a weldon, so twin intank pumps is where we want.
I forgot about the fuel filter- Stainless mesh is the only way. Paper will gum up for sure.
Louis
#40
11 Second Club
iTrader: (20)
Join Date: Oct 2004
Location: colorado springs colorado
Posts: 270
Likes: 0
Received 6 Likes
on
3 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I ve been running e 85 in my Trans Am for 6 months. I ran a mix in my 01 zo6 and my brother ran it for ten thousand miles in 600 whp talon. Its the only way to go if you have regular access to it. Couple things to consider 1. oil changes need to be more frequent or you need to step up brad penn oil or joe gibbs hot rod oil 2. its in the 23-25 percent range for more fuel. I am personally running 165lbs injectors, a weldon pump, 60 psi fuel pressure and was making 1004 sae whp. no knock, on 10 -1 compression albeit at high elevation. 3. I would still run an intercooler for consistency and safety, but with e 85 you dont have to run some huge or expensive intercooler. 4. I would use the highest volume gas station so you can to insure fresh clean fuel. 5. it will start in the cold(done it under 20 degrees out) but it can be a little rough. On the flip side it cranks long enough to build up oil pressure before fireing which is a positive to me when its cold out.6. Gas mileage does suck lol but spool is better.