2011 FASTEST FI LSx 1/4 MILE LIST
07-06-2011, 05:55 AM
#81
TECH Senior Member
iTrader: (21)
Join Date: Nov 2001
Location: Cecil County Raceway!!!
Posts: 8,484
Likes: 0
Received 0 Likes
on
0 Posts
I hope to get it sorted out enough to make a few full 1/4 mile passes by early august so I can make my Advanced ET license passes
07-08-2011, 04:40 PM
#84
9 Second Club
Join Date: Jun 2008
Location: Los Angeles, CA
Posts: 240
Likes: 0
Received 0 Likes
on
0 Posts
This was on 7 cylinders and lifting past the 1/8th mile and probably at about 1000ft. Figured out the problem and should be back out soon to run it on all 8.
ericg69ss............/TH400/1969 Camaro Stock Suspension/412"/F1R/3425/1.333/5.645/126.96/9.018/125.55/28x10.5 Mickey Thompson
ericg69ss............/TH400/1969 Camaro Stock Suspension/412"/F1R/3425/1.333/5.645/126.96/9.018/125.55/28x10.5 Mickey Thompson
Last edited by ericg69ss; 07-09-2011 at 10:39 AM.
07-09-2011, 03:36 AM
#85
You sure you lifted at 1/8 mile. Hardly dropped 1 mph in 660 feet.
07-09-2011, 10:37 AM
#86
9 Second Club
Join Date: Jun 2008
Location: Los Angeles, CA
Posts: 240
Likes: 0
Received 0 Likes
on
0 Posts
By the time I actually let out it was more than likely past the 1/8th. Probably between 1/8th and 1000ft. I lifted and shut the car off to get plug readings. The brain always reacts quicker than the body.
07-09-2011, 03:32 PM
#87
Either way that thing is running good, I'd be thrilled to ran 126 mph in 1/8. I might see 120 - 122 mph if lucky. Your on your way to a 160 mph pass.
07-15-2011, 03:01 AM
#88
TECH Regular
Join Date: Aug 2007
Location: Sweden
Posts: 479
Likes: 0
Received 0 Likes
on
0 Posts
Here are the worlds fastest LS timeslip.
Monte carlo -97 tube chassie.
Hughes powerglide with neal converter.
17x34,5x16" slicks.
2540 lbs.
AES racing/PPF LSX 408 with twin Precision 7675 billet.
1.060 60-foot
4.36@166 mph 1/8
6.74@204 mph 1/4
Monte carlo -97 tube chassie.
Hughes powerglide with neal converter.
17x34,5x16" slicks.
2540 lbs.
AES racing/PPF LSX 408 with twin Precision 7675 billet.
1.060 60-foot
4.36@166 mph 1/8
6.74@204 mph 1/4
Last edited by camaroandreas; 07-16-2011 at 01:19 AM.
07-16-2011, 12:12 AM
#89
Can you translate that for me in the above format or as close as possible?
I'll put it up for now but I need a transmission type, vehicle type, race weight, 1/8th mile time and speed and tire size and type or I gotta take it down.
Congrats on the record
I'll put it up for now but I need a transmission type, vehicle type, race weight, 1/8th mile time and speed and tire size and type or I gotta take it down.
Congrats on the record
Last edited by 98Z28CobraKiller; 07-16-2011 at 12:19 AM.
07-16-2011, 12:22 AM
#90
This was on 7 cylinders and lifting past the 1/8th mile and probably at about 1000ft. Figured out the problem and should be back out soon to run it on all 8.
ericg69ss............/TH400/1969 Camaro Stock Suspension/412"/F1R/3425/1.333/5.645/126.96/9.018/125.55/28x10.5 Mickey Thompson
ericg69ss............/TH400/1969 Camaro Stock Suspension/412"/F1R/3425/1.333/5.645/126.96/9.018/125.55/28x10.5 Mickey Thompson
07-17-2011, 06:17 AM
#91
TECH Regular
Join Date: Aug 2007
Location: Sweden
Posts: 479
Likes: 0
Received 0 Likes
on
0 Posts
Is that information ok?
07-17-2011, 12:43 PM
#92
9 Second Club
Join Date: Jun 2008
Location: Los Angeles, CA
Posts: 240
Likes: 0
Received 0 Likes
on
0 Posts
07-24-2011, 11:24 AM
#94
On The Tree
Went out today and made my first pass of the year! I addded an FMIC over the holidays and I dropped .4 tenths!!! The date was 15 Jan 2011.
Packy.....................TH400/ Trans Am / 346 /P1SC/3700/ 1.60 / 6.607 / 107.62 / 10.295@129.30 / Hoosier QTP's 27x11.5
http://www.youtube.com/watch?v=ZiD-KB4WNXw
Packy.....................TH400/ Trans Am / 346 /P1SC/3700/ 1.60 / 6.607 / 107.62 / 10.295@129.30 / Hoosier QTP's 27x11.5
http://www.youtube.com/watch?v=ZiD-KB4WNXw
07-25-2011, 08:21 AM
#95
Woot add me!
rotary1307cc........./glide.../ 91 rx7/......370/.......GTS78/.....2950lbs/.......1.574/.....6.046/.....121.16/.....9.300/......149.32.... 26x9 hoosier slick
first time to the track and a street legal!
very surprised with how it ran, never expected it
i am out of gear and bumping the limiter before i cross too
this is footbraking, rolling out, and then rolling into WOT
this is on 12.5psi boost, and E85
got a 9.95 on 17" DRs too
rotary1307cc........./glide.../ 91 rx7/......370/.......GTS78/.....2950lbs/.......1.574/.....6.046/.....121.16/.....9.300/......149.32.... 26x9 hoosier slick
first time to the track and a street legal!
very surprised with how it ran, never expected it
i am out of gear and bumping the limiter before i cross too
this is footbraking, rolling out, and then rolling into WOT
this is on 12.5psi boost, and E85
got a 9.95 on 17" DRs too
07-25-2011, 02:22 PM
#96
Here is mine, not sure if it qualifies but since I did it on 18's and 555R DR's it might be good enough
.....
fbodyjunkie06............./4L80E/3800stall / Fbody / 346 /PTE76GTS/ #4085/ 1.71/7.237 /.103.46/.10.972./.134.87/ Nitto 305/35/18 555R Drag Radial Chrome C6 ZO6 Wheel
I know I know I know it's small and I stenciled the times in. Now I left most the slip un-altered just to show how shitty and how badly the printer ink at The Rock needs to be changed. I can barely read the slip with my naked eye let alone in a picture. If it's good enough for you Los post it up please if not I'll just run faster and not worry about it
.....fbodyjunkie06............./4L80E/3800stall / Fbody / 346 /PTE76GTS/ #4085/ 1.71/7.237 /.103.46/.10.972./.134.87/ Nitto 305/35/18 555R Drag Radial Chrome C6 ZO6 Wheel
I know I know I know it's small and I stenciled the times in. Now I left most the slip un-altered just to show how shitty and how badly the printer ink at The Rock needs to be changed. I can barely read the slip with my naked eye let alone in a picture. If it's good enough for you Los post it up please if not I'll just run faster and not worry about it
07-28-2011, 10:40 PM
#97
Woot add me!
rotary1307cc........./glide.../ 91 rx7/......370/.......GTS78/.....2950lbs/.......1.574/.....6.046/.....121.16/.....9.300/......149.32.... 26x9 hoosier slick
first time to the track and a street legal!
very surprised with how it ran, never expected it
i am out of gear and bumping the limiter before i cross too
this is footbraking, rolling out, and then rolling into WOT
this is on 12.5psi boost, and E85
got a 9.95 on 17" DRs too
rotary1307cc........./glide.../ 91 rx7/......370/.......GTS78/.....2950lbs/.......1.574/.....6.046/.....121.16/.....9.300/......149.32.... 26x9 hoosier slick
first time to the track and a street legal!
very surprised with how it ran, never expected it
i am out of gear and bumping the limiter before i cross too
this is footbraking, rolling out, and then rolling into WOT
this is on 12.5psi boost, and E85
got a 9.95 on 17" DRs too
Here is mine, not sure if it qualifies but since I did it on 18's and 555R DR's it might be good enough.....
fbodyjunkie06............./4L80E/3800stall / Fbody / 346 /PTE76GTS/ #4085/ 1.71/7.237 /.103.46/.10.972./.134.87/ Nitto 305/35/18 555R Drag Radial Chrome C6 ZO6 Wheel
I know I know I know it's small and I stenciled the times in. Now I left most the slip un-altered just to show how shitty and how badly the printer ink at The Rock needs to be changed. I can barely read the slip with my naked eye let alone in a picture. If it's good enough for you Los post it up please if not I'll just run faster and not worry about it
.....fbodyjunkie06............./4L80E/3800stall / Fbody / 346 /PTE76GTS/ #4085/ 1.71/7.237 /.103.46/.10.972./.134.87/ Nitto 305/35/18 555R Drag Radial Chrome C6 ZO6 Wheel
I know I know I know it's small and I stenciled the times in. Now I left most the slip un-altered just to show how shitty and how badly the printer ink at The Rock needs to be changed. I can barely read the slip with my naked eye let alone in a picture. If it's good enough for you Los post it up please if not I'll just run faster and not worry about it
