PCV Idea w/o breather
#22
TECH Veteran
iTrader: (17)
Shouldve known Kurt Urban would have em:
http://www.kurturbanperformance.com/...ick-plugs.html
http://www.kurturbanperformance.com/...ick-plugs.html
#23
#24
TECH Fanatic
iTrader: (59)
Join Date: Jan 2007
Location: Pittsburgh,Pa
Posts: 1,736
Likes: 0
Received 0 Likes
on
0 Posts
I got my catch can from the WS6 store too and added steel wool to the inside of the can for a better grabbing of the oil mist before it leaves the can and heads back to my TB. My intake has been dry ever since doing this cheap mod to the can !I have maybe a table spoon or 2 of oil everytime i change my oil at 3000 miles.So it definatly works!
Last edited by barnat; 04-05-2011 at 08:15 PM.
#26
12 Second Club
iTrader: (11)
Join Date: Feb 2009
Location: Plainfield, IN
Posts: 570
Likes: 0
Received 0 Likes
on
0 Posts
If all else fails...check valves are a turbo cars friend to fight against that good old neg to pos pressure transition! carefully placed check valves can make any catch can system work pretty effectively IMO...
#28
TECH Fanatic
iTrader: (59)
Join Date: Jan 2007
Location: Pittsburgh,Pa
Posts: 1,736
Likes: 0
Received 0 Likes
on
0 Posts
Just google (LSI catch can) and you can pick and chose which ever one you want and who sales them . I picked mine because its looked good and was thinner then other that i saw.It was also easyer to get to that bottom pep **** to drain it,, whenever i changed my oil!