02SOMLS1WS6

Thanks for checking on this bob and please let us know asap when some install directions are available. I would think that the fmic might be a couple bucks less than the twin IC's based on how much you sell the two different systems (of corse twins with polished plenum).

Bob@BruteSpeed

iTrader: (16)

Will do, thanks! Bob

black01_WS6

iTrader: (13)

Bob- makes sense with the group purchase idea on big ticket items. When you get a kit in can you measure the piping- I am guessing it is 3in. Also intersted in keeping the fogs, I am sure there will be a way to keep them in, people will just have to think outside the box a little bit.

I should be ordering the aster bracket soon, and this will be soon to follow.

Bob@BruteSpeed

iTrader: (16)

Hi Mike, the tubing is three inch. Thanks! Bob

Bob@BruteSpeed

iTrader: (16)

The front mount intercooler option is actually several hundred dollars more than the twin intercooler option, per ProChargers pricing guuide. I have the front mount as an option on my website now with the correct pricing. Thanks. Bob

Bob@BruteSpeed

iTrader: (16)

http://shop.brutespeed.com/ATI-1GJ20...-Speed-Kit.htm

Here is the complete system with the new front mount intercooler option. Bob

ChevyChad

iTrader: (50)

I think I would tweak your website a bit Bob. Seems to me, if I wanted the FMIC, how the website is setup now, I would click the box to Delete Twin Intercooler Assembly (-$750), and then under the Intercooler Options area, click 1GJ115-IC (+$208). This makes the FMIC over $500 cheaper than the twins. I think all IC options should be under the IC options pull down- would be less confusing..

Bob@BruteSpeed

iTrader: (16)

Great idea! I just went in and changed it, please take a look at it now and see if it is less confusing. Thanks! Bob

ChevyChad

iTrader: (50)

Looks better Bob. I would still add a no cost change line to the dropdown in the IC options list for standard dual 4.5" IC. Kind of like you have the standard J bracket as a no cost option for the bracket section, (or you can choose the aster bracket for $600 more).

Maybe this is just my opinion, but I dont really like the check boxes to get to a dropdown list. To me, it seems cleaner just having only the dropdown list, but just my personal preference.. Hope you dont mind my constructive criticism Bob

Bob@BruteSpeed

iTrader: (16)

Good idea on the no charge option for the standard intercoolers, I'll change it. I don't like the check boxes either, but that is the way Go Daddy has their shopping carts configured, I've tried to do it without the check boxes but it won't let me. I want all the constructive criticism I can get, it only helps to make things better! Thanks! Bob

ChevyChad

iTrader: (50)

Looks great Bob!

Bob@BruteSpeed

iTrader: (16)

Thanks! If you see anything else that needs improvements, by all means, let me know. Bob

02LS1z

iTrader: (11)

i would like to see some more pictures please!!

Bob@BruteSpeed

iTrader: (16)

I'll add more pic's as soon as I get some more of them. Thanks for inquiring! Bob

MstgKillr

iTrader: (4)

Any engine bay pics?

Bob@BruteSpeed

iTrader: (16)

I just added more pictures to the above link. Thanks for asking. Bob

3.8to6.0

iTrader: (10)

Looks great Bob! Do you think there will be an option if you want it w/o the MAF sensor?

KS91Z28

You could just put a 3.5" pipe in place of where the MAF would go. ProCharger probably even has that piece from another kit powdercoated and ready to go.

RaVagE

Am I missing the engine bay pics? I only see the two from before with the FMIC.

Bob@BruteSpeed

iTrader: (16)

Go down to the bottom of the page. Thanks. Bob