ChevyChad

iTrader: (50)

+1...

Bob@BruteSpeed

iTrader: (16)

I still haven't added the instruction manual to where you can view it, but I have added pictures that a customer took of his Camaro SS. Note that he had to notch the bottom side of his SS hood for the ProCharger front mount, as can be seen in one of the pictures. Bob

dopy

TermnEatr

iTrader: (24)

Do you know if the piping will fit under another hood.. Like the sunoco hood I really dnt wanna chop up my ss hood.

Bob@BruteSpeed

iTrader: (16)

The ProCharger Front Mount fits Firebirds, Camaros, and Trans-Ams without hood interference. The Camaro SS does require either hood modifications or some plumbing modifications, for ProChargers Front Mount to clear the hood. Take a look at the thread at this link to see how the front mount can be made to clear without doing any hood modifications. https://ls1tech.com/forums/forced-in...-pictures.html Bob

Spade

iTrader: (26)

Could you just order the piping or do you have to get everything?

Bob@BruteSpeed

iTrader: (16)

I haven't talked to you in a while! I'm sure the parts can be ordered by piece part, but I don't have piece part prices for this system yet. I'll see what I can do, and I'll get back to you. Thanks. Bob

js2fst

iTrader: (12)

With the obstruction of air flow to radiator do I need a different radiator?

Bob@BruteSpeed

iTrader: (16)

I've never seen a huge difference in engine temps when adding a front mount intercooler. Bob

NemeSS

iTrader: (127)

What is current pricing for red race valve?
Which is the next step lower of bov?

NemeSS

iTrader: (127)

What is current pricing for red race valve?
Which is the next step lower of bov?

Bob@BruteSpeed

iTrader: (16)

$370.00 and it is the only one that is a direct mount on the front mount kit. Thanks. Bob

Spade

iTrader: (26)

I have been out of the game for awhile, car has been sitting for a few years now. Got into motorcycles and only have so much time and money. Looking at getting the car back on the road again though. Just let me know.

Bob@BruteSpeed

iTrader: (16)

I just added the parts to my website. You can check them out at this link. http://shop.brutespeed.com/Intercool...Parts_c348.htm Thanks. Bob

Bob@BruteSpeed

iTrader: (16)

For anyone who would like to see a copy of the ProCharger front mount intercooler instructions, shoot me an e-mail to brutespeed@gmail.com and I'll e-mail you a copy. Thanks! Bob

Patsy57

iTrader: (37)

Can you reuse the stock fan with this intercooler? If not what is the suggestion on fan replacement? I know there have been numerous concerns and threads about over heating with the pro-charger fan assembly. Thoughts?

TermnEatr

iTrader: (24)

I had asked a similar ? And was suggested to get the procharger fan shroud but get the spal fan instead of the procharger fan. Here's the link http://www.a1electric.com/Merchant2/..._Code=30102082

If the link don't work directly enter it in Google it should pop up the 16' spal.

Patsy57

iTrader: (37)

TermnEatr will this suffice so the vehicle doesnt overheat?

TermnEatr

iTrader: (24)

According to every thread yes and it was also referred to by bob which makes it that much more trustworthy.

Bob@BruteSpeed

iTrader: (16)

Thanks, I appreciate it! Bob