see sig

 

damn all you m6 guys are making me feel bad

 

ricky dont worry about dyno numbers worry about track times
very few M6 cars run as well as we do now

 

LOL yeah Tom i know but im trying to prove a point to one of my buddys with out saying it out loud. if you would like to know the point hit me up on the pm

 

Post some track times as well please

 

dam you m6 guys and big rwhp numbers. lol

 

pm sent

 

My car went 10.10 at 143 on a 1.79 60 ft....puke on my life!
if the bitch dont run some ******* 9's this year ill burn that bitch to the ground

 

right back at ya

 

i thought your 60 foot was better than that ricky. what i still cant figure out is how you went 3mph fast but .14 second slower than me. im coming to your state to line them up LOL and you will be in the 9s dont worry

 

come on down tom! lol
we did not have the tune worked out...but we do know and ill have me a trans brake this year!

 

Stock LS6
LG Long Tubes
Hi flow cats
GHL exhaust
50/50 meth / water
91 pump
Procharger P1-SC-1 with 8psi
657/562

Currently I am building a 383 with 10.3:1 compression, Procharger D1, large cam, new fuel system, 8 rib kit, etc.. We are hoping for 750+ with around 12-14 psi.

 

auto or stick?

Wait nevermind i see you have a Z06 lol my bad

 

I have a

Forged 347 @ 9.6:1 comp ratio
Stock 241's with dual springs and upgraded pushrods
214/224 .563/.563 @114
Mac mids with ORY and Corsa CB
P1SC (8 psi) with EPP FMIC
Ally control kit
Th400 with 4k stall and trans brake
Moser 12 bolt with 3.73's

My times are in my sig. Power #'s are 550 rwhp and 520 lb ft.

 

what dyno was that on? and do you know how much timimng it was running

 

Dyno jet.. Was around 21* total.

 

Forged 370
Ported 241 heads
GT47-88
4L80E
9 inch
15lbs

710 to the ground

 

do you have any track times becuase those number seem alittle high for 8psi with a p-1

 

good numbers....but we are wanting to see what us small motor guys are making

 

Well hopefully I can tell ya what my little 347 does with a fresh motor and big turbo in about 2-3 months.

347 9.8:1 CR
205 AFR heads
ported Vic Jr
VA speed cam
Truck mani kit with a PT88
planning on 15psi through a TH400

Hoping to go Low 9s with it @ 3400lb race weight