Twin Turbo Chevy II build
#389
Thread Starter
9 Second Club
iTrader: (6)
Joined: Aug 2002
Posts: 886
Likes: 0
From: Cecil County, MD
As bad as the floor looks in the pix, I can actually bang it out and fix it pretty easy. I'm going to be welding in a much more robust front driveshaft loop anyhow. Considering mine got ripped out of the floor brace.
#398
I ended up having a 4" diameter drive shaft built for my Nova after adding the turbos. Years ago I grenaded my driveshaft on a chassis dyno and it did similar damage underneath the car and bellhousing. Get's your attention for sure.
On another note, after only driving a couple hundred street miles with the turbos I have already shelled the pinion gear in my 10-bolt differential. Working on a replacement now...
On another note, after only driving a couple hundred street miles with the turbos I have already shelled the pinion gear in my 10-bolt differential. Working on a replacement now...
#399
Thread Starter
9 Second Club
iTrader: (6)
Joined: Aug 2002
Posts: 886
Likes: 0
From: Cecil County, MD
I ended up having a 4" diameter drive shaft built for my Nova after adding the turbos. Years ago I grenaded my driveshaft on a chassis dyno and it did similar damage underneath the car and bellhousing. Get's your attention for sure.
On another note, after only driving a couple hundred street miles with the turbos I have already shelled the pinion gear in my 10-bolt differential. Working on a replacement now...
On another note, after only driving a couple hundred street miles with the turbos I have already shelled the pinion gear in my 10-bolt differential. Working on a replacement now...