BIGBOS

After I got home from a class this morning I was greeted by a nice brown box, my mom said something about rubber things, she had already opened it.....

I saw that they were some nice COG belts........very exciting to say the least, these pulleys are quality, can't wait to get them on.........

Pictures should be in this link w/the fuel stuff.....

http://community.webshots.com/album/118060446sTXBFB

Pro Stock John

iTrader: (34)

Nice. You better not order porno cuz you would get in trouble.

I couldn't keep up with that other thread, what is the current status of folk's cars? Are the cogs fitting okay or are folks using spacers?

Sounds like Clint would benefit from Sikora's brace if he's still throwing belts.

nbm00ws6

iTrader: (4)

Are they on yet? lol Mine should be here later today or tomorrow. I sent emails and left voice mails on the injectors, I'll let ya know what I hear. Hurry up and get those cogs on, I want to see how much boost we will make around our neck of the woods.
Tom

BIGBOS

I'll hopefully get them on at the end of the week, I'm having Sikora install them, but he is in the process of moving right now, so we will see what happens, I will keep you updated as things happen.........

Keep me updated with the injector situation........

nbm00ws6

iTrader: (4)

You've got mail.

Billy the Great

iTrader: (2)

so the car will actually run this year

im seriously you guys tho looks real good. Now get the think tuned and set so we can go to 41 in 2 weeks when im home for spring break

NA$TY-TA

iTrader: (21)

Awsome. Bos, From the time you placed your order to when you recieved them how long was it? Thanks
Kyle

BIGBOS

I lost track in between, I would say a little over a month......

Billy the Great

iTrader: (2)

short term memory loss eh brian

frcefed98

iTrader: (16)

Good Stuff Glad you got yours, I can't wait to see if the Sikora's come up with a different way to get them spaced. Definately take lots of pics of what they do, and give details. Too bad they haven't made that bracket support for us LS1 ATI guys other than you, a lot of us need one.
DO me a huge favor when getting the tensioner mounted on the bracket, take a pic of that, I want to see how far it sits away from the bracket(want to know if lee machined yours different)

Got the race gas today, should be going to the dyno either tomorrow or Thursday.
J AKA "other Folks"

1dirtyZ

iTrader: (1)

is it just me or is the blower cog "thinner"?

if that isn't the case , can someone ask lee if he can make cogs that are not too thick ( take as much space as the belt pulley or a bit more), so you don't need to space the blower any.

BIGBOS

Jeremy what gas are you going to be running 100?

I will make sure to snap plenty of shots of the whole setup from all different angles......

NA$TY-TA

iTrader: (21)

Bos, Are you going to dyno tune on pump gas?? 93? When do you think you will have your on and ready to tune?? You still going to try and get those 42#'s to twork or did you order the 57#ers or 60#ers.
Kyle

BIGBOS

I'm going with the 60# mototrons, I will be dynoing in the next week or so, hopefully can get the COGS on by the end of the week if possible, I'll be running 100 octane.....

frcefed98

iTrader: (16)

Yep my buddy PNYKILR(Neal) got me 5 gal of 101. Fresh plugs and intake gaskets are going in today. Kind of nervous...hopefully she does well.
J

BIGBOS

Good deal, keep us updated........

1dirtyZ

iTrader: (1)

intake gaskets?

frcefed98

iTrader: (16)

Yep intake manifold gaskets, when I rebuilt the engine I didn't get new intake manifold gaskets and I fear that I have a small vacuum leak on one of them from one being too old or nicked. I think that it didn't seal right.
J

NA$TY-TA

iTrader: (21)

Jer, Dynoing today or tomorrow..................
Kyle

nbm00ws6

iTrader: (4)

Got my cog set-up today