Work In Progress: '98 F-Body TVS2300
#21
Got it running and was able to trim the bottom rear of the hood to get it to shut!
Have not driven it yet - Waiting on my friend to come by and dial in the tune. Idles good. Seem to have more audible lifter rattle now for some reason. I have some different valve covers that have aluminum tube supports that lock the covers to the heads. Also the aluminum intake under the Maggie. Not sure if noise just resonating more than before.
I have a video I shot today and will try to post it up soon. Getting closer!
Have not driven it yet - Waiting on my friend to come by and dial in the tune. Idles good. Seem to have more audible lifter rattle now for some reason. I have some different valve covers that have aluminum tube supports that lock the covers to the heads. Also the aluminum intake under the Maggie. Not sure if noise just resonating more than before.
I have a video I shot today and will try to post it up soon. Getting closer!
#23
UNDER PRESSURE MOD
iTrader: (19)
Here is a link to the video. I need to clean up the hole I cut in the hood.
http://s33.photobucket.com/albums/d5...814_184928.mp4
http://s33.photobucket.com/albums/d5...814_184928.mp4
#27
I left part of the cowl to be able to fasten the cowl cover back on when finished. We will see how it looks when I am done.
Right now I am going back in to check and/ or change out the lifters. I believe one of the LSX lifter retainers may be cracked, but not sure. Hope nothing else is damaged.
Last edited by Deeavi; 08-16-2011 at 08:26 PM. Reason: sp
#28
Update of the rattling noise. Found the back of the 2 end Jesel J2K rockers on both sides of the engine hitting/rubbing on the intake side of the GMP valve covers. I can see the valve covers moving when the engine is idling. Pulled the covers and I will have to grind clearance for those areas. Boy there is always something, but hopefully this will not be too bad.
Later!
Later!
#29
UNDER PRESSURE MOD
iTrader: (19)
Update of the rattling noise. Found the back of the 2 end Jesel J2K rockers on both sides of the engine hitting/rubbing on the intake side of the GMP valve covers. I can see the valve covers moving when the engine is idling. Pulled the covers and I will have to grind clearance for those areas. Boy there is always something, but hopefully this will not be too bad.
Later!
Later!
#32
Been working on it all winter. I only get to work on it on the weekends, and it just took me awhile to get the ERL based motor together.
Got it running, and it runs and sounds great. I only have 50 miles on it now. Everything is good, except one problem, that I hope to get resolved this weekend. I went with Yella Terra adjustable rockers and am having valve cover sealing problems. It has been fighting me for awhile. I don't want to spend $500 on a set of valve covers. I hope to have it fixed this weekend. I will post some updates soon as I get that taken care of.
Got it running, and it runs and sounds great. I only have 50 miles on it now. Everything is good, except one problem, that I hope to get resolved this weekend. I went with Yella Terra adjustable rockers and am having valve cover sealing problems. It has been fighting me for awhile. I don't want to spend $500 on a set of valve covers. I hope to have it fixed this weekend. I will post some updates soon as I get that taken care of.
#33
Been working on it all winter. I only get to work on it on the weekends, and it just took me awhile to get the ERL based motor together.
Got it running, and it runs and sounds great. I only have 50 miles on it now. Everything is good, except one problem, that I hope to get resolved this weekend. I went with Yella Terra adjustable rockers and am having valve cover sealing problems. It has been fighting me for awhile. I don't want to spend $500 on a set of valve covers. I hope to have it fixed this weekend. I will post some updates soon as I get that taken care of.
Got it running, and it runs and sounds great. I only have 50 miles on it now. Everything is good, except one problem, that I hope to get resolved this weekend. I went with Yella Terra adjustable rockers and am having valve cover sealing problems. It has been fighting me for awhile. I don't want to spend $500 on a set of valve covers. I hope to have it fixed this weekend. I will post some updates soon as I get that taken care of.