on3 turbo
#185
which turbos would be my best bet? i want journal bearing , so i can keep price down. i would like them to light easily so car is not a sled! its a 69 f body, tube chassis, turbo 400 , 33-17-slicks.
#186
On The Tree
I was asking about the F-body. He told me they dont have plans for the near future but who knows maybe I talked to one there who wasnt really interested in the business as much as others there are.
#193
Staging Lane
I would be very interested in an on3 kit. There is gap between the high end kits and the useless ebay stuff. I believe the mustang kits are 3 grand? Thats half of the other kits are. Come on3, do it!
#194
TECH Fanatic
iTrader: (11)
This is my opinion base off of the few on3 mustangs I've seen and research I've done on them
I'm also a eBay hotparts owner and I all reality there is only two major issues with it , the dp and a few bolt holes needed to be clearanced , I knew this going into it so I've never bothered with the dp and made my own
I can guarantee modular turbos kit is far superior than anything that on3 is going to make and is going to be same price range
I wish they made there kits before I built my car
#195
11 Second Club
iTrader: (3)
the quality of the our eBay kit is on par or better then what on3 offers for mustangs as far as the hotparts go
This is my opinion base off of the few on3 mustangs I've seen and research I've done on them
I'm also a eBay hotparts owner and I all reality there is only two major issues with it , the dp and a few bolt holes needed to be clearanced , I knew this going into it so I've never bothered with the dp and made my own
I can guarantee modular turbos kit is far superior than anything that on3 is going to make and is going to be same price range
I wish they made there kits before I built my car
This is my opinion base off of the few on3 mustangs I've seen and research I've done on them
I'm also a eBay hotparts owner and I all reality there is only two major issues with it , the dp and a few bolt holes needed to be clearanced , I knew this going into it so I've never bothered with the dp and made my own
I can guarantee modular turbos kit is far superior than anything that on3 is going to make and is going to be same price range
I wish they made there kits before I built my car
4v kit putting down 600hp plus and runs 10's:
http://www.svtperformance.com/forums...t-install.html
2v forward facing kit:
488hp on a 2v
http://www.moddedmustangs.com/forums...sults-on3.html
http://www.moddedmustangs.com/forums...rbo-build.html
Last edited by 99Ls1fever; 01-15-2012 at 08:59 PM.
#196
9 Second Club
iTrader: (2)
Join Date: Feb 2011
Location: Holland, MI
Posts: 78
Likes: 0
Received 0 Likes
on
0 Posts
iv just started looking at these turbos for my turbo build and read all the pages in this thread and saw alot of people asking about the f-body ls1 kits well as i was searching i found this!
Last edited by smokinHawk; 02-09-2012 at 07:01 AM. Reason: nonsponsor url
#198
TECH Fanatic
iTrader: (12)
Join Date: May 2005
Location: Nashville, TN
Posts: 1,250
Likes: 0
Received 0 Likes
on
0 Posts
a couple small changes on the ebay hotside and it works just fine. New v bands from precision, maybe a cut and re weld or 2, and wrap it, and its pretty nice for 500. Its not really a easy bolt on kit though...but then again, its 500. I've got a on3 ball bearing 76 on a ebay hotside with a/c..its not bad
#200
On The Tree
I called modular performance and asked. They said that theyve never tested it and arent sure it would fit but I am gonna test it out when I order the modular hotside