coolmanvette75

iTrader: (2)

Great build and numbers man!

67Firebird455

iTrader: (27)

Heck yeah, awesome building and numbers to boot!

Ryans99ls1

iTrader: (16)

Figured its time for an update in here atleast. Posted the results in a separate thread but i wanted to update this as well. Precision 7675 GTS-H is in and it made some great power! The bigger turbine let the car hold boost better and it made 690 right off the street.. no changes whatsoever. threw another degree in it through the entire range and fattened it up to 11.0AFR throughout. Tuner said my 80lbs were maxed on this pull but it was pretty cool to see.

Timing at peak torque is 14deg, at peak hp its 19-20deg.
Boost was at 16psi and fell to 15psi by the end of the pull.
Left the dyno at 12lbs so its back down to 680-690. I still may bring it down some more cus the rods have to extremely angry with me..

Brian at Dynotune Motorsports in Columbus OH deserves the tuning credit!! Guy is awesome.




This video(click the picture) may have been the 720hp pull but obviously all i did was up the boost a lil to hit 760.


Picture of the current setup

StangTamer

iTrader: (6)

Nice numbers, very impressive. I've followed your whole build. I'm in the middle of my own front mount and it will be modeled after your build as well as tallys. congrats on the new numbers.

Ryans99ls1

iTrader: (16)

Thanks. Id love to say that ill have track numbers soon but i wont. Between graduating, moving and starting my job (all in May).. im not gonna have much time. Although my buddy just ran 10.7 at 133 tonight, so ill atleast know if its faster than that soon enough I use his car/times as my measurement system haha

YURVIEW

iTrader: (127)

super impressive build. just read all of it!! All this still on the stock short block?? Just finished up my front mount build not too long ago. trying to decide on a trans now, the stock 4L60 isn't too happy about the new upgrades. LOL. Thanks for posting such an informative thread. Very Helpful

Tally TransAm

iTrader: (17)

nice numbers man. thats enough power to go 9's with the six speed. my tc76 is running outta gas at 14#'s so ive been considering this swap

Ryans99ls1

iTrader: (16)

Thanks! Yeah its still on the stock bottom. Besides a good tune, its the low rpms keeping it alive. I shift at 6k and i really think thats why its still going strong.

Best decision i ever made! But yeah when i saw the numbers i was thinking this mayyy be enough to go 9's haha. i dont think i could bring myself to run it out the back door at 16lbs though.. ive been running around at 12-13psi which is around 700 and thats aleardy pushing it.

mrstepheneades

Man i seen your video on facebook..... NICE!!!!!!!!!!!!!!!!!

Ryans99ls1

iTrader: (16)

Thank you sir! Good luck with yours, youve got an even better turbo on there!

Ryans99ls1

iTrader: (16)

quick speedo vid, this is at 13-14psi. I dont really like the effect that letting youtube "smooth" it out had.. but oh well

JAY-R

iTrader: (10)

nice video man! Im doing a similar set up as yours. Are you pretty happy with the PT7675? I was planning on running the T78 but my buddy Blake that owns 417motorsports told me the PT is the turbo to run. Nice seeing those numbers on stock shortblock! Post more videos

BOBS99SS

iTrader: (2)

Looks good bud,we are all trying to get together for some runs,would like to see ya run this ctsv that is now more of a monster than it was before lol,really great build,i tried finding you on facebook but didnt have any luck

I8UR4RD

iTrader: (16)

nice car! runs hard. impressive its on the stocker. mine didnt care for 600rwhp at all!

I must say, thank you for posting a proper video. Speedo was right there and it was in the daytime, and wasnt filmed with a potato. you sir are winning.

Ryans99ls1

iTrader: (16)

I LOOOOVE THE PT76, seriously. I finally understand why all the big dogs hate on the TC78. The exhaust side is way too small. Run the T78 if you want but make sure it has atleast a 75mm exhaust side.

Im always down! Ran a couple guys from akron tonight, car performed flawlessly. Although i am moving to Michigan this friday to start work so you may have to give me a couple weeks to make it back.

put "jefe" in as my middle name and you should fine me.

Thank you for both the compliments! I actually held the gopro in my mouth and it turned out great, hahah. I honestly ran the **** out of it tonight at somewhere between 680-700whp (~13psi). 40-140 pulls and it did not skip a beat. im so proud of this motor and my tune. I cannot thank my tuner (brian turner at dynotune motorsports in cbus ohio) enough, this thing is SPOT on. Just goes to show what these motors can really handle with a good tune.

The videos of the runs should pop up soon, ill update when they are up.

Ryans99ls1

iTrader: (16)

runs from tonight.

Serious curve up ahead, thats why you see me disappear so quick. Had 1/4-1/2 car on the fox at that point and was obviously pulling. Other car is a turbo 2v, he was right with me and i had about the same on him. we were all pretty even. Second run should be up soon!

40-140.
fox is a pt76 at 12lbs with a 302. He told me 12lbs then later claimed 10lbs so idk.
2V has a Tnetics 7675 at 16lbs, creeps to 18.
Im on 13lbs.

I8UR4RD

iTrader: (16)

great race. i wanna see some trap speeds now

JAY-R

iTrader: (10)

lovin this car right now!

Ryans99ls1

iTrader: (16)

Me too. 2V went 10.4 at 133 couple weeks ago, so im somewhere around there.

Thank you.

Should also mention i put a 3.25 rear gear in, along with a 3.5in aluminum driveshaft and 1350 billet yoke.

02sleeperz28

iTrader: (26)

Nice build.